Liftmaster SL595 Sliding Gate Opener Repair

S.O.S Liftmaster SL595 Sliding Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

Liftmaster SL595 Sliding Gate Opener Repair

    We have been a Liftmaster sliding gate opener repair service company here in and around Farmers Branch Texas for over 20 years. Note: Most Liftmaster sliding gate openers are AC powered, but some do have backup batteries to run the sliding gate opener for a short while when the AC power is out, but the SL595 gate openers should be instaled to use one of the AC power options. When you need residential Liftmaster SL595 sliding gate opener repair, or Liftmaster SL595 commercial sliding gate opener repair we are the company with experienced Liftmaster SL595 sliding gate opener repair technicians that come out with the intent of actually repairing your existing sliding gate opener. Most other companies are mainly new installation companies (some only do certain types of swing gate openers) and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new sliding gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our Liftmaster SL595 sliding gate opener repair techs are experienced and skilled at repairing all types of Liftmaster sliding gate openers, even the ones that others say that nobody works on. When we come out to do Liftmaster SL595 sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new sliding gate opener installs as well if that is what you want, but we do sliding gate opener repair on existing sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For information on the SL595 that we do sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your Liftmaster SL595 sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Liftmaster SL595U Sliding Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

Liftmaster SL595U Sliding Gate Opener Repair

    We have been a Liftmaster sliding gate opener repair service company here in and around Farmers Branch Texas for over 20 years. Note: Most Liftmaster sliding gate openers are AC powered, but some do have backup batteries to run the sliding gate opener for a short while when the AC power is out, but the SL595U gate openers should be instaled to use one of the AC power options. When you need residential Liftmaster SL595U sliding gate opener repair, or Liftmaster SL595U commercial sliding gate opener repair we are the company with experienced Liftmaster SL595U sliding gate opener repair technicians that come out with the intent of actually repairing your existing sliding gate opener. Most other companies are mainly new installation companies (some only do certain types of swing gate openers) and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new sliding gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our Liftmaster SL595U sliding gate opener repair techs are experienced and skilled at repairing all types of Liftmaster sliding gate openers, even the ones that others say that nobody works on. When we come out to do Liftmaster SL595U sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new sliding gate opener installs as well if that is what you want, but we do sliding gate opener repair on existing sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For information on the SL595U that we do sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your Liftmaster SL595U sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Liftmaster SL595UL Sliding Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

Liftmaster SL595UL Sliding Gate Opener Repair

    We have been a Liftmaster sliding gate opener repair service company here in and around Farmers Branch Texas for over 20 years. Note: Most Liftmaster sliding gate openers are AC powered, but some do have backup batteries to run the sliding gate opener for a short while when the AC power is out, but the SL595UL gate openers should be instaled to use one of the AC power options. When you need residential Liftmaster SL595UL sliding gate opener repair, or Liftmaster SL595UL commercial sliding gate opener repair we are the company with experienced Liftmaster SL595UL sliding gate opener repair technicians that come out with the intent of actually repairing your existing sliding gate opener. Most other companies are mainly new installation companies (some only do certain types of swing gate openers) and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new sliding gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our Liftmaster SL595UL sliding gate opener repair techs are experienced and skilled at repairing all types of Liftmaster sliding gate openers, even the ones that others say that nobody works on. When we come out to do Liftmaster SL595UL sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new sliding gate opener installs as well if that is what you want, but we do sliding gate opener repair on existing sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For information on the SL595UL that we do sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your Liftmaster SL595UL sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Sliding Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

Liftmaster SL595 Series Sliding Gate Openers:

**** The following is a list of the Liftmaster SL595 series sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

Liftmaster SL595

Liftmaster SL595U

Liftmaster SL595UL

*************

S.O.S Sliding Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

LiftMaster SL595 Slide Gate Operator (SL595)

LiftMaster SL595 Slide Gate Operator

THIS UNIT WAS DISCONTINUED BUT IS STILL REPAIRABLE

The LiftMaster® SL595 is an extreme heavy-duty operator for industrial locations such as manufacturing plants and truck depots. The extremely powerful design supports gate lengths up to 90 feet and gate weights up to 2,500 pounds. Fully enclosed NEMA 3R oil-tight, weatherproof lockable cabinet and a high-starting continuous-duty torque motor with built-in overload protection ensure rugged and reliable performance. This model is ideal for the heaviest industrial installations and is UL325-compliant.

  *Built-in 312HM radio receiver
   *Larger control box
   *Integrated 3-button control station
   *External reset button
   *Inherent obstruction sensing
   *External obstruction sensing
   *Advanced dual gate operation
   *Sequenced access management
   *Digital logic control
   *LED indicators
   *Warning device
   *Loop detector inputs
   *Timer to close
   *Maximum run timer
   *Emergency stop button
   *Maglock control
   *Control inputs
   *Mechanical braking
   *Limit settings
   *Surge & spike protection
   *Manual disconnect
   *NEMA 3R enclosure
   *Hinged access cover

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Sliding Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

LiftMaster SL595U AC Slide Gate Operator (SL595U AC)

LiftMaster SL595U AC Slide Gate Operator

DISCONTINUED 8/1/18 NOW SL595UL

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Dual Voltage Connections Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements. Voltage is selectable within phases at the time of installation with the placement of a connector.
• Single Phase: 115V, 208V and 230V
• 3 Phase: 208V, 230V and 460V
• 3 Phase: 575V is a discrete model without field-selectable voltage. Includes factory installed heater.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Mechanical Braking System Adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
• Maximum Run Timer Protects against damage to the gate and operator by limiting the unit’s runtime to 120 seconds.
• External Alarm Reset Button Allows for quick reset of the gate operator when the alarm has been activated.
• Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close. Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• Homelink® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• The P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Manual Disconnect when unlocked allows gate to be operated.
• Lockout/Tagout Feature prevents power from being switched on. Safeguards workers from high-voltage power.
• Heavy Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 115/208/230 VAC. Single Phase. 208/230/460/575 VAC. 3 Phase.
• Accessory Power 24VAC, 500mA max.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® High starting torque continuous-duty motor.
• Operator Duty Rating 25 cycles per hour.
• Metal Frame 7-gauge pre-galvanized steel.
• Worm Gear Reduction 20:1 worm gear reducer.
• Chain #50 nickel-plated (25 ft. supplied).
• Cover Powder-coated, pre-galvanized 16-gauge steel oil tight, weatherproof NEMA 3R lockable cabinet.
• Operator Weight 270 lbs.

Recommended Capacities

• 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

S.O.S Sliding Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

LiftMaster SL595UL AC Slide Gate Operator (SL595UL AC)

LiftMaster SL595UL AC Slide Gate Operator

SL595UL features a heavy-duty industrial lockable metal cover.

Reliable

• Commercial gear-driven transmission provides unsurpassed reliability.
• Heavy-Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 2 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Simplified Mounting and Wiring Routing for easier installations.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Manual Disconnect when unlocked allows gate to be operated manually.
• Quick Close and Anti-tailgate quickly secure property, preventing unauthorized access.
• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
• Mechanical Braking System: this solenoid-actuated brake system adds substantial gate position control at all points in travel and prevents the gate from being back driven.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• High-Starting Torque continuous-duty motor (available in 1, 1 1/2 and 2 HP)
• Operator Duty Rating: 25 Cycles per Hour
• Wormgear Reduction: 20:1 Wormgear reducer
• Mechanical Limit System: maintains accurate gate position throughout travel, even after using manual disconnect
• Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
• Chain: #50 nickel-plated (25ft. supplied)

Power

• 115/208/230VAC Single-Phase or 208/230/460/575vac 3-phase (575v includes factory-installed heater) (Specify when ordering)
• Accessory Power: 24VDC 500mA Max.
• Dual -Voltage Connections: increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements

Commercial-Grade Design

• Metal Frame: 7-gauge pre-galvanized steel
• Maximum Run Timer: protects against damage to the gate and operator by limiting the unit’s run time to 120 seconds
• Cover: powder-coated, pre-galvanized 16-gauge steel oil -tight, weatherproof NEMA 3R lockable cabinet
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 270 lbs.

Dimensions

• Height: 30.08”
• Width: 27.45”
• Depth: 17.14”

Recommended Capacities

• 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.

Temperature Specifications

• Without heater: -4°F (-20°C) to 140°F (60°C)
• With optional heater: (HTRNB—HTR460 for 460V operators) 40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 12” per second

Standard Features

• Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
• External Alarm Reset Button instantly resets the built - in safety alarm siren
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or Higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

************

S.O.S Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

Liftmaster Gate Opener Remote Controls and Keypads:

**** The following is just a small list of some controls and accessories we replace and install, there are many more different solutions for the many different gate opener configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate opener.

Radio Recievers

Remotes

Keypads

To get on our schedule for your Liftmaster Gate Opener Controls and Programing Service needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

Liftmaster 312HM Universal Coaxial Receiver (312HM)

Liftmaster 312HM Universal Coaxial Receiver with Security+®

312HM – 315 MHz

• External 8" whip antenna included.
• Security+® rolling code and/or DIP switch compatibility
• 12VDC or 18 - 35VAC/DC jumper selectable
• Momentary or constant contact, jumper selection
• 2-piece aluminum case with detachable cover
• High security memory stores up to 15 Security+® remote control or keyless entry codes
• Normal security memory stores up to 31 LiftMaster® remote control codes of any type
• FCC certified 315MHz

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***************

Liftmaster 412HM Universal Coaxial Receiver (412HM)

Liftmaster 412HM Universal Coaxial Receiver with Security+®

390 MHz

• External 8" whip antenna included.
• Security+® rolling code and/or DIP switch compatibility
• 12VDC or 18 - 35VAC/DC jumper selectable
• Momentary or constant contact, jumper selection
• 2-piece aluminum case with detachable cover
• High security memory stores up to 15 Security+® remote control or keyless entry codes
• Normal security memory stores up to 31 LiftMaster® remote control codes of any type
• FCC certified 315MHz

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

Liftmaster STAR 450 Commercial Universal Receiver (STAR450)

Liftmaster STAR 450 Commercial Universal Receiver

315 MHz or 390 MHz (Specify with order)

• For gate and commercial door operators
• Compact size; easy to program
• Reduces installation time; compact design fits inside most gate operators
• Universal receiver with antenna
• Rapid Learn® feature programs multiple transmitters in just seconds
• User-friendly programming technology makes it easy to add, block and delete up to 450 transmitters individually
• Ideal for gated communities, parking lots and garages
• Compatible with Chamberlain® Security+®, billion code and keyless entry technologies
• Duplicate memory module may be removed for programming additional receivers or for safe backup storage

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*******************

S.O.S Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

LiftMaster Universal Remote Control (375LM)

LiftMaster Premium Remote Control

To get on our schedule for your Liftmaster Remote Controls and Programing Service needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***************

S.O.S Gate Opener Repair - Farmers Branch Texas

972-814-0489 / 214-366-4455

LiftMaster 377LM Wireless Keyless Entry System (377LM)

LiftMaster 377LM Wireless Keyless Entry System

To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*****************

LiftMaster 387LM Wireless Keyless Entry System (387LM)

LiftMaster 387LM Wireless Keyless Entry System

Universal Keyless Entry

• Designed to work with a variety of brands of garage door openers
• Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
• Wireless – powered by one 9V battery (included)
• Weatherproof, slide-up protective cover
• Backlit keypad

To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***************