Automatic Gate Opener Repair

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster Automatic Sliding Gate Openers:

**** The following is just a list of just some of the Liftmaster automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Liftmaster automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

Liftmaster RSL12UL

Liftmaster CSL24UL

Liftmaster SL3000UL

Liftmaster SL585UL

Liftmaster SL595UL

Liftmaster RSL12U

Liftmaster CSL24U

Liftmaster SL3000U

Liftmaster SL585U

Liftmaster SL595U

Liftmaster SL575

Liftmaster SL585

Liftmaster SL595

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster RSL12UL 12VDC Slide Gate Operator (RSL12UL 12VDC)

LiftMaster RSL12UL Slide Gate Operator

RSL12UL features battery backup that provides up to 114 cycles or 63 days of standby power.

Reliable

• Solar-Ready, Ultra-Reliable System delivers power when and where you need it.
• Battery Backup provides seamless access by providing standby power when the power is down.
• Smooth Start/Stop Operation and mid-travel reversal extend operator hardware life.
• Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Warranty 3 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Posilock® prevents gate from an unauthorized manual open.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Manual Disconnect when unlocked allows gate to be opened manually.
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile Resistive Edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Power

• 115VAC
• Solar-Ready, Ultra-reliable System delivers power when and where you need it
• Accessory Power: 12VDC 500mA output

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: 1-piece UV-resistant polyethylene cover
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 100 Lbs.

Dimensions

• Height: 23.30”
• Width: 16.24”
• Depth: 16.76”

Temperature Specifications

• Without Heater: -4°F (-20°C) to 140°F (60°C)
• With Optional Heater: (HTR) -40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 10” per second

Standard Features

• Synchronized Close simultaneously closes gates
• Quick Close and Anti-Tailgate Quickly secure property, preventing unauthorized access (requires expansion board)
• Inherent Reversing Sensor Detects obstructions and reverses gate when closing or stops/reverses
• Monitored Safety Inputs 3 main board, 3 optional expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

RECOMMENDED CAPACITIES

• Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster CSL24UL Slide Gate Operator (CSL24UL)

LiftMaster CSL24UL Slide Gate Operator

CSL24UL features a battery backup that provides up to 208 cycles or 24 days of standby power.

Reliable

• Battery Backup provides seamless access by providing standby power when the power is down.
• Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Smooth start/stop operation and mid-travel reversal extend operator hardware life.
• Warranty 5 years commercial, 7 years residential.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Quick Close and Anti-Tailgate quickly secures the property, preventing unauthorized access.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Manual Disconnect when unlocked allows gate to be opened manually.
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories

• LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• 24VDC Continuous duty
• Operator Duty Rating: high-cycle, high-temperature continuous duty
• Wormgear Reduction: Commercial oil-bath gearbox provides 10:1 Wormgear reduction
• Chain: #41 Black Oxide (30ft. Supplied)

Power

• 120/230V single-phase
• Optional Kit (3PHCONV) to convert an input voltage of 208/230/460/575VAC to an output voltage of 120VAC
• Solar-Ready Ultra-Reliable System delivers power when and where you need it
• Accessory Power: 24VDC 500mA output; switched and un-switched power

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: high-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance
• UL® Usage Classification: I, II, III, and IV
• Operator Weight: 140 lbs.

Dimensions

• Height: 25.07”
• Width: 15.55”
• Depth: 19.51”

Temperature Specifications When Cold:

• Without heater: -4°F (-20°C)
• With heater: (HTR) -40°F (-40°C)

Temperature Specifications When Hot:

• Without heater: 140°F (60°C)
• With heater: (HTR) 140°F (60°C)

Gate Speed

• 12” per second

Standard Features:

• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses gate when opening
• Posilock® automatically closes the gate when it is pushed from the closed limit
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL3000UL Slide Gate Operator (SL3000UL)

LiftMaster SL3000UL Slide Gate Operator

AC High - Traffic Commercial Slide Gate Operator

CONTINUOUS-DUTY, High-Temperature Motor

The SL3000UL models of slide gate operators are the first choice for heavy-traffic applications and high-demand customers, including large development and management companies, prestigious residential gated communities, and custom home builders.

Featuring the highest quality components and backed by years of proven reliability, each unit is carefully inspected and mechanically tested to provide unsurpassed performance. Unique engineering innovations ensure than any SL3000UL™ model will meet the needs of almost every type of high-traffic gated entrance. All backed by the safety and reliability of the most advanced control board in the industry.

Reliable

• Legacy elite heavy-duty commercial gear-driven transmission provides unsurpassed reliability.
• Limit switch design provides precision limit accuracy and reliability.
• Surge suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 5 years commercial, 7 years residential.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless dual-gate communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® Safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Inherent reversing sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
• Pre-motion warning alarm activates on-board alarm 3 seconds prior to gate motion.
• Manual disconnect when unlocked allows gate to be operated manually.
• Quick close and anti-tailgate quickly secure property, preventing unauthorized access.
• UL® Listed Gate operators with monitored safety entrapment protection devices.

Mechanics

• Continuous-Duty Motor with Class H Insulation is rated for high-cycle, high-temperature applications (available in 1/2 and 1 HP)
• Operator Duty Rating: Continuous Duty
• Wormgear Reduction: Commercial oil-bath gearbox providing 30:1 Wormgear Reduction
• Chain: #41 Black Oxide (25ft. Supplied)

Power

• 115V Single-Phase
• Accessory Power: 24VDC 500mA output
• 2 Auxiliary Outlets
• Optional Kit (3PHCONV) to convert an input voltage of 208/240/480/575VAC to an output Voltage of 115VAC

Commercial-Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: High-Density, UV-Resistant , 1-Piece Polyethylene plastic for excellent heat and corrosion resistance
• UL® Usage Classification: I, II, III and IV
• Operator weight: 140 lbs.

Dimensions

• Height: 26.51”
• Width: 18.14”
• Depth: 20.39”

Gate Capacities

• 1/2 HP Motor - Gates up to 50ft long or 1000 lbs
• 1 HP Motor - Gates up to 50 ft or 2000 lbs

Temperature Specifications

• Without heater: -4°F (-20°C ) to 140°F (60°C
• With optional heater: (HTRNB) -40°F (-40°C ) to 140°F (60°C)

Gate Travel Speed

• 12” per second

Standard Features

• External Alarm Reset Button instantly resets the built in safety alarm siren
• Mechanical Limit System maintains accurate gate position throughout gate travel, even after using manual disconnect
• Monitored Safety Inputs 3 main board, 3 expansion boards
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

The SL3000UL gate operator is available in the following models:

  *SL3000UL: standard model
   *SL3000ULDC: equipped with battery backup
   *SL3000ULDM: dual motor for heavier traffic and higher temperatures
   *SL3000ULE: capable of manual backdrive for emergency access
   *SL3000UL1HP: heavy-duty, 1 horsepower model for heavier gates

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL585UL AC Slide Gate Operator (SL585UL AC)

LiftMaster SL585UL AC Slide Gate Operator

SL585UL features a heavy- duty industrial lockable metal cover.

Reliable

• Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 2 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Universal Footprint simplifies retrofit applications by adapting to preexisting pads.
• Homelink® Compatible (version 4.0 and higher).

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Manual Disconnect when unlocked allows gate to be operated manually.
• Quick Close and Anti-tailgate quickly secure property, preventing unauthorized access.
• Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
• Automatic Solenoid Brake prevents the gate from being back driven.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• High-Starting Torque continuous-duty motor (available in 1/2, 1 and 1 1/2 HP)
• Operator Duty Rating: 20 cycles per hour
• Wormgear Reduction: 20:1 Wormgear Reducer
• Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
• Chain: #50 nickel-plated (25ft. supplied)

Power

• 115/208/230VAC Single-Phase or 208/230/460/575vac 3-phase (575v includes factory-installed heater) (Specify when ordering)
• Accessory Power: 24VDC 500mA Max.
• Dual -Voltage Connections: increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.

Commercial-Grade Design

• Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments
• Cover /Frame: weather-resistant, lockable, 16-gauge steel ; 7-gauge pre-galvanized steel frame
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 240 lbs.

Dimensions

• Height: 38.02”
• Width: 30.63”
• Depth: 17.30”

Recommended Capacities by Motor Size:

• 1/2 HP - 1000 Lbs Max, 45 Ft Max Width for Overhead or V-Groove Gates, 25 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 HP - 1600 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 1/2 HP - 1900 Lbs Max, 75 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 20 Cycles/Hr.

Temperature Specifications

• Without heater: -4°F (-20°C) to 140°F (60°C)
• With optional heater: (HTRNB—HTR460 for 460V operators) 40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 11” per second

Standard Features

• External Alarm Reset Button: instantly resets the built-in safety alarm siren
• Mechanical Limit System: maintains accurate gate position throughout gate travel, even after using manual disconnect
• Monitored Safety Inputs: 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver: Tri-Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display: simplifies installation and troubleshooting
• Programmable Auxiliary Relays: make adding additional features easy
• Homelink® Compatible: version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL595UL AC Slide Gate Operator (SL595UL AC)

LiftMaster SL595UL AC Slide Gate Operator

SL595UL features a heavy-duty industrial lockable metal cover.

Reliable

• Commercial gear-driven transmission provides unsurpassed reliability.
• Heavy-Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 2 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Simplified Mounting and Wiring Routing for easier installations.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Manual Disconnect when unlocked allows gate to be operated manually.
• Quick Close and Anti-tailgate quickly secure property, preventing unauthorized access.
• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
• Mechanical Braking System: this solenoid-actuated brake system adds substantial gate position control at all points in travel and prevents the gate from being back driven.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• High-Starting Torque continuous-duty motor (available in 1, 1 1/2 and 2 HP)
• Operator Duty Rating: 25 Cycles per Hour
• Wormgear Reduction: 20:1 Wormgear reducer
• Mechanical Limit System: maintains accurate gate position throughout travel, even after using manual disconnect
• Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
• Chain: #50 nickel-plated (25ft. supplied)

Power

• 115/208/230VAC Single-Phase or 208/230/460/575vac 3-phase (575v includes factory-installed heater) (Specify when ordering)
• Accessory Power: 24VDC 500mA Max.
• Dual -Voltage Connections: increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements

Commercial-Grade Design

• Metal Frame: 7-gauge pre-galvanized steel
• Maximum Run Timer: protects against damage to the gate and operator by limiting the unit’s run time to 120 seconds
• Cover: powder-coated, pre-galvanized 16-gauge steel oil -tight, weatherproof NEMA 3R lockable cabinet
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 270 lbs.

Dimensions

• Height: 30.08”
• Width: 27.45”
• Depth: 17.14”

Recommended Capacities

• 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.

Temperature Specifications

• Without heater: -4°F (-20°C) to 140°F (60°C)
• With optional heater: (HTRNB—HTR460 for 460V operators) 40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 12” per second

Standard Features

• Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
• External Alarm Reset Button instantly resets the built - in safety alarm siren
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or Higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster RSL12U 12VDC Slide Gate Operator (RSL12U 12VDC)

LiftMaster RSL12U 12VDC Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE RSL12UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
• Synchronized Close Simultaneously closes gates.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK ® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Reciever Up to 50 remote controls (unlimited with 811LM/813LM).
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop and Mid-Travel Reversal Extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Lockable Manual Disconnect When unlocked allows gate to be operated manually.
• Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion.
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 12VDC or solar powered.
• Accessory Power 12VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
• Temperature Specifications
• Without Heater: -4°F (-20°C) to 140°F (60°C).
• With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 10 in. per second.

Construction

• P3 Motor 12VDC continuous-duty motor.
• Operator Duty Rating 120 cycles per day.
• Chassis Constructed with 1/4 in. gold-zinc plated steel for rust prevention.
• Worm Gear Reduction Commercial oil bath gearbox with 12:1 worm gear reduction.
• Cover 1-piece UV-resistant polyethylene cover.
• Operator Weight 100lbs.

RECOMMENDED CAPACITIES

• Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster CSL24U 24VDC Slide Gate Operator (CSL24U 24VDC)

LiftMaster CSL24U 24VDC Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE CSL24UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
• Pre-Motions Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK®Compatible Version 4 and higher.
• SECURITY+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Engineered For More Than 1 Million Cycles, Our P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop Extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Keyed Manual Disconnect When unlocked allows gate to be operated manually.
• Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 120V/230V Single Phase.
• Accessory Power 24VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications
• Without Heater: 4°F (-20°C) to 140°F (60°C).
• With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® 24VDC continuous-duty motor.
• Operator Duty Rating High-cycle, high-temperature continuous duty.
• CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
• Worm Gear Reduction Commercial oil bath gearbox providing 10:1 worm gear reduction.
• Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
• Operator Weight 140 lbs.

RECOMMENDED CAPACITIES

• Rated for gates up to 50 ft. in length or weighing up to 1,500 lbs.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL3000U Slide Gate Operator (SL3000U)

LiftMaster SL3000U Slide Gate Operator

AC High - Traffic Commercial Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE SL3000UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Dual Voltage Connections Eliminates expensive conduit costs and unsightly driveway scars.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• External Alarm Reset Button Instantly resets the built-in safety alarm siren.
• Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• Homelink® Compatible Version 4 and higher.
• SECURITY+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Our P3 Motor is designed to perform in the most demanding environments.
• Legacy Elite Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Manual Disconnect When unlocked allows gate to be operated. Connect to optional Fire Department Box to meet local fire code.
• Inherent Reversing Sensor Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.
• Limit Switch Design Provides precision limit accuracy and reliability.

Specifications

• Power 110V Single Phase.
• Accessory Power 24VDC, 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.

Temperature Specifications

• Without Heater: -4°F (-20°C) to 140°F (60°C).
• With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® High temperature continuous duty motor with class H (high-temperature) insulation is rated for high-cycle, high temperature applications.
• Operator Duty Rating Continuous duty.
• Chassis Same bolt pattern/footprint - Constructed with 1/4 in. gold zinc plated steel for rust/corrosion prevention.
• Worm Gear Reduction Commercial oil bath gearboxes with 30:1 wormgear reduction.
• Cover High-density UV resistant one piece polyethylene plastic for excellent heat and corrosion resistance.
• Operator Weight 140 lbs.

Recommended Capacities

• 1 HP Rated for gates up to 37 ft. in length or weighing up to 2,000 lbs.
• 1/2 HP Rated for gates up to 37 ft. in length or weighing up to 1,000 lbs.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL585U AC Slide Gate Operator (SL585U AC)

LiftMaster SL585U AC Slide Gate Operator

DISCONTINUED 8/1/2018 NOW SL585UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Dual Voltage Connections Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements. Voltage is selectable within phases at the time of installation with the placement of a connector.
• Single Phase: 115V, 208V and 230V
• 3 Phase: 208V, 230V and 460V
• 3 Phase: 575V is a discrete model without field-selectable voltage. Includes factory installed heater.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Mechanical Braking System Adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
• Maximum Run Timer Protects against damage to the gate and operator by limiting the unit’s runtime to 120 seconds.
• External Alarm Reset Button Allows for quick reset of the gate operator when the alarm has been activated.
• Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Homelink® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Our P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Lockable Manual Disconnect when unlocked allows gate to be operated.
• Lockout/Tagout Feature prevents power from being switched on. Safeguards workers from high-voltage power.
• Heavy Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 115/208/230 VAC. Single Phase. 208/230/460/575 VAC. 3 Phase.
• Accessory Power 24VDC, 500mA max.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C). UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 11 in. per second.

Construction

• P3 Motor® High starting torque continuous-duty motor.
• Operator Duty Rating 25 cycles per hour.
• Metal Frame 7-gauge pre-galvanized steel.
• Worm Gear Reduction 20:1 worm gear reducer.
• Chain #50 nickel-plated (25 ft. supplied).
• Cover Powder-coated, pre-galvanized 16-gauge steel oil tight, weatherproof NEMA 3R lockable cabinet.
• Operator Weight 240 lbs.

Recommended Capacities by Motor Size:

• 1/2 HP - 1000 Lbs Max, 45 Ft Max Width for Overhead or V-Groove Gates, 25 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 HP - 1600 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 1/2 HP - 1900 Lbs Max, 75 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 20 Cycles/Hr.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL595U AC Slide Gate Operator (SL595U AC)

LiftMaster SL595U AC Slide Gate Operator

DISCONTINUED 8/1/18 NOW SL595UL

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Dual Voltage Connections Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements. Voltage is selectable within phases at the time of installation with the placement of a connector.
• Single Phase: 115V, 208V and 230V
• 3 Phase: 208V, 230V and 460V
• 3 Phase: 575V is a discrete model without field-selectable voltage. Includes factory installed heater.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Mechanical Braking System Adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
• Maximum Run Timer Protects against damage to the gate and operator by limiting the unit’s runtime to 120 seconds.
• External Alarm Reset Button Allows for quick reset of the gate operator when the alarm has been activated.
• Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close. Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• Homelink® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• The P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Manual Disconnect when unlocked allows gate to be operated.
• Lockout/Tagout Feature prevents power from being switched on. Safeguards workers from high-voltage power.
• Heavy Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 115/208/230 VAC. Single Phase. 208/230/460/575 VAC. 3 Phase.
• Accessory Power 24VAC, 500mA max.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® High starting torque continuous-duty motor.
• Operator Duty Rating 25 cycles per hour.
• Metal Frame 7-gauge pre-galvanized steel.
• Worm Gear Reduction 20:1 worm gear reducer.
• Chain #50 nickel-plated (25 ft. supplied).
• Cover Powder-coated, pre-galvanized 16-gauge steel oil tight, weatherproof NEMA 3R lockable cabinet.
• Operator Weight 270 lbs.

Recommended Capacities

• 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL575 Slide Gate Operator (SL575)

LiftMaster SL575 Slide Gate Operator

THIS UNIT WAS DISCONTINUED BUT IS STILL REPAIRABLE

The LiftMaster® SL575 is a reliable continuous-duty operator for use on heavy-gate applications in commercial and light industrial locations. This resilient operator offers many standard features such as dual gate operation, sequenced access management, diagnostic LEDs, and more. The SL575 supports gate lengths up to 50 feet and gate weights up to 1,800 pounds, making it ideal for commercial and light industrial installations.

  *Built-in 312HM radio receiver
   *Universal footprint
   *Larger control box
   *Integrated 3-button control station
   *Large accessory tray
   *External manual disconnect
   *External reset button
   *Self-locking drive
   *Inherent obstruction sensing
   *External obstruction sensing
   *Advanced dual gate operation
   *Sequenced access management
   *Digital logic control
   *LED indicators
   *Warning device
   *Loop detector inputs
   *Timer to close
   *Maximum run timer
   *Emergency stop button
   *Maglock control
   *Control inputs
   *Mechanical braking
   *Limit settings
   *Surge & spike protection
   *Hinged access cover

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

****************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL585 Slide Gate Operator (SL585)

LiftMaster SL585 Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE

The LiftMaster® SL585 is a durable heavy-duty gear-driven operator for use on heavy gates and high-cycle applications such as gated communities and industrial locations. The powerful design supports gate lengths up to 70 feet and gate weights up to 1,600 pounds. A strong powder-coated galvanized steel chassis, all-weather gearbox, as well as a weather-resistant, lockable cover ensure years of rugged and reliable performance. This model is ideal for heavy commercial and industrial installations and is UL325-compliant.

  *Built-in radio receiver
   *Universal footprint
   *Larger control box
   *Integrated 3-button control station
   *Large accessory tray
   *External manual disconnect
   *External reset button
   *Inherent obstruction sensing
   *External obstruction sensing
   *Advanced dual gate operation
   *Sequenced access management
   *Digital logic control
   *LED indicators
   *Warning device
   *Loop detector inputs
   *Timer to close
   *Maximum run timer
   *Emergency stop button
   *Maglock control
   *Control inputs
   *Mechanical braking
   *Limit settings
   *Surge & spike protection
   *Hinged access cover

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster SL595 Slide Gate Operator (SL595)

LiftMaster SL595 Slide Gate Operator

THIS UNIT WAS DISCONTINUED BUT IS STILL REPAIRABLE

The LiftMaster® SL595 is an extreme heavy-duty operator for industrial locations such as manufacturing plants and truck depots. The extremely powerful design supports gate lengths up to 90 feet and gate weights up to 2,500 pounds. Fully enclosed NEMA 3R oil-tight, weatherproof lockable cabinet and a high-starting continuous-duty torque motor with built-in overload protection ensure rugged and reliable performance. This model is ideal for the heaviest industrial installations and is UL325-compliant.

  *Built-in 312HM radio receiver
   *Larger control box
   *Integrated 3-button control station
   *External reset button
   *Inherent obstruction sensing
   *External obstruction sensing
   *Advanced dual gate operation
   *Sequenced access management
   *Digital logic control
   *LED indicators
   *Warning device
   *Loop detector inputs
   *Timer to close
   *Maximum run timer
   *Emergency stop button
   *Maglock control
   *Control inputs
   *Mechanical braking
   *Limit settings
   *Surge & spike protection
   *Manual disconnect
   *NEMA 3R enclosure
   *Hinged access cover

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Viking Automatic Sliding Gate Openers:

**** The following is just a list of just some of the Viking automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Viking automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

Viking H10

Viking K2

Viking K2S Solar

Viking L3

Viking Q4

Viking Q7

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Viking H10 Slide Gate Operator (H10)

Viking H10 Slide Gate Operator

The H-10™ gate operator has the capacity to operate slide gates up to 2000 lbs. and 45 feet in length at 100% duty cycle under extreme conditions. It's efficient mechanism provides a solution for high traffic commercial slide gate applications. The Viking H-10™ gate operator offers efficiency and technology combined in a single package.

* built-in lightening protection
* 120 / 220 VAC power source
* back-driveable unit
* direct drive mechanism
* easy access to limit switch
* 2000 lbs. capacity
* 100 cycles during power failure
* soft-start, soft-stop
* adaptive learn algorithm
* easily accessed manual switch
* innovative fine tune adjustment

To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Viking K2 Slide Gate Operator (K2)

Viking K2 Slide Gate Operator

The K-2™ slide gate operator raises the bar in quality for the residential market. This machine operates a highly efficient direct motor drive which allows operation at 100% duty cycle. This assures efficiency and reliability. The fail-safe, fail-secure options of the K-2™ gate operator allows it to handle gates up to 650 lbs. in conformance with UL 325 and UL 991 Type I, III and IV.

* innovative fine tune adjustment
* switch to allow manual operation
* easy access to limit switch
* 100 cycles during power failure
* back-driveable
* 120 / 220 VAC power source
* on-board lightening protection
* soft-start, soft-stop algorithm

To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Viking K2S Solar Slide Gate Operator (K2S Solar)

Viking K2S Solar Slide Gate Operator

Max Gate Capacity

• 700 lbs/30'

Residential DC motor

• equivalent to 1/3 HP AC motor

V-Flex Control Board

• This control board is universal across the Viking DC & Solar Gate Operator line.
• Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
• Diagnostic, Voltages, Settings, and Status Display
• Conveniently labeled enclosure
• Ergonomically located
• LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.

Corrosion Protection

Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

• G90 Galvanized
• Clear Zinc Plating
• UV Rated Powder Coating
• 1/4" Steel Chassis
• Large Space for Battery

The K-2™ Solar Slide Gate Operator can be used for gates up to 700 lbs and 30 ft long. The controller has its very own power management system to use its solar regulator to its fullest potential. The V-Flex Solar will allow for soft stop and soft start for smooth and accurate operation. Homeowners and installers alike have found great success with Viking's solar K-2 model.

Features:

MAX GATE CAPACITY

• 700 lbs/30' - This is the maximum amount of weight and length that the gate operator model can push/pull.

MAX OPERATING SPEED

• 12" Per Seconds - Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

SOLAR POWER SUPPLY

• 12 VDC - This is the power voltage needed for the gate operator to function

OPERATING TEMP

• 0°F up to 160°F - The Viking gate Operator will continue to function within this temperature range.

WARRANTY

• 5 Yr Residential - Please refer to manufactuerer's Warranty Policy for more information.

STRIKE PROTECTION

• 10,000 Amps / 20,000 Volts - Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Viking L3 Slide Gate Operator (L3)

Viking L3 Slide Gate Operator

The L-3™ gate operator has the capacity to operate slide gates up to 1200 lbs. and 40 feet in length at 100% duty cycle under extreme conditions. It's efficient mechanism provides a solution for high traffic commercial slide gate applications. The Viking L-3™ gate operator offers efficiency and technology combined in a single package.

* soft-start, soft-stop
* adaptive learn algorithm
* built-in lightening protection
* innovative fine tune adjustment
* back-driveable unit
* features direct drive mechanism
* easy access to limit switch
* larger chassis
* 120/220 VAC power source
* easily accessed manual switch

To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Viking Q4 Slide Gate Operator (Q4)

Viking Q4 Slide Gate Operator

The Q-4™ incorporates a powerful and efficient DC motor, a high amp power supply, an integrated battery back-up system and intelligent controller. The incorporation of these features results in outstanding performance on heavy duty slide gates. The advanced motor control circuit driving the motor guarantees long life. The Q-4™brings the advantages of DC gate operators into heavy duty applications.

* fail safe/fail-secure lock
* adaptive algorithm
* smooth acceleration / deceleration
* adjustable-height for main drive
* standard back-up battery
* more than 1/2 kilowatt of power
* innovative fine tune adjustment
* powerful gear head motor
* 100% duty cycles
* 100 cycles in case of power failure

To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Viking Q7 Slide Gate Operator (Q7)

Viking Q7 Slide Gate Operator

Max Gate Capacity

• 7000 lbs/120' - Commercial DC motor equivalent to 2 HP AC motor

V-Flex Control Board

This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.

• Diagnostic, Voltages, Settings, and Status Display
• Conveniently labeled enclosure
• Ergonomically located
• LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.

Multi-layer Corrosion Protection

Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

• G90 Galvanized
• Clear Zinc Plating
• UV Rated Powder coating
• 1/4" Steel Chassi

2 HP 24V DC Motor

The Q-7 boasts a powerful and efficient 2 horse power DC voltage motor that can push/pull up to 7000 lbs. This motor is powered by its own individual power source directly from the power box. This ensures the proper amount of voltage and amperage is supplied the motor at all times.

The Q-7™ Slide Gate Operator is equipped with mechanical manual release freeing the gate completely from the gear drive.​ Some of the standard features include: 5 year commercial warranty, UL325 and UL991 compliance, innovative fine tune adjustment for the end of gate travel ( down to 1/8” ), adaptive algorithm with smooth acceleration and deceleration, and more than 1/2 kilowatt of power. This commercial rated operator comes with a built in battery backup system capable of 100 cycles in case of power failure, and a powerful and efficient gear-head motor.

Features:

MAX GATE CAPACITY

• 7000 lbs/120' - This is the maximum amount of weight and length that the gate operator model can push/pull.

MAX OPERATING SPEED

• 14" Per Seconds - Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

MAX DUTY CYCLE

• 100% Continuous Cycle - 100% duty cycle means that you can run your operator 24/7 with absolute confidence.

OPERATING TEMP

• -20°F up to 160°F The Viking gate Operator will continue to function within this temperature range.

WARRANTY

• 5 Yr Commercial - Please refer to manufactuer's Warranty Policy for more information.

STRIKE PROTECTION

• 10,000 Amps / 20,000 Volts - Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Ram Automatic Sliding Gate Openers:

**** The following is just a list of just some of the Ram automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Ram automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

Ram 1000UL

Ram 100UL

Ram 5000UL

*************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

RAM 1000UL Slide Gate Operator (1000UL)

RAM 1000UL Slide Gate Operator

Perfect for heavier residential or commercial installations.

Max Gate Size: 35' @ 1000lbs
Gate Speed Opening: 1' / sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 Amp,50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:
Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock.

To get on our schedule for your Ram sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

RAM 100UL Slide Gate Operator (100UL)

RAM 100UL Slide Gate Operator

The Ram 100 is perfect for both residential and light duty commercial applications.

Max Gate Size: 20' @ 700lbs
Gate Speed Opening: 1' / sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 Amp, 50/60 Hz

Control Board:
A state-of-the-art, processor controlled, surface- mount pcb with features such as:
Electronic Reversing Device (ERD):
Automatically adjusts to the Size of the gate
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock.

To get on our schedule for your Ram sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

RAM 5000UL Slide Gate Operator (5000UL)

RAM 5000UL Slide Gate Operator

Max Gate Size: 40' @ 1000lbs
Gate Speed Opening: 1' / sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 Amp, 50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:
Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock.

To get on our schedule for your Ram sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

All-O-Matic Automatic Sliding Gate Openers:

**** The following is just a list of just some of the All-O-Matic automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your All-O-Matic automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

All-O-Matic SL-100 AC

All-O-Matic SL-100 DC

All-O-Matic SL-100FP AC

All-O-Matic SL-100FP_DC

All-O-Matic SL-45 DC

All-O-Matic SL-90_DC

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

All-O-Matic SL-100 AC Slide Gate Operator (SL-100 AC)

All-O-Matic SL-100 AC Slide Gate Operator

Designed to be the strongest, most durable AC gate operator in its class, the SL-100AC is sure to fit the needs of most residential and commercial gate installation. Setting a new standard in slide gate operators, SL-100AC can move gates that are up to 1,000 lbs. and 37 feet wide. Â Just like our DC Slider 100 we now offer an optional emergency foot pedal release.

AC operators come with the simplest and most dependable control board in the industry thats backwards compatible. A powerful and durable motor that has been field tested for over 20 years.

Specs

• Warranty Full 7 Year Residential, 5 Year Commercial
• Motor ½ HP
• Duty Cycle Continous
• Power Options 120 V AC
• Gear Box Ratio 10:1
• Cover Rotationally Molded – Indestructible
• Dimensions W: 12" - L: 17.5" – H: 23.5"
• Maximum Gate Length 37 Feet
• Maximum Gate Weight 1,000 lbs
• Gate Travel Speed 12 inches per sec
• Operator Weight 100 lbs
• Emergency Release Options Can be pushed open in the event of a power failure
• Battery Backup N/A

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

All-O-Matic SL-100 DC Slide Gate Operator (SL-100 DC)

All-O-Matic SL-100 DC Slide Gate Operator

Designed to be the strongest, most durable DC gate operator in its class, the SL-100DC is sure to fit the needs of most residential and commercial gate installation. Setting a new standard in slide gate operators, SL-100DC can move gates that are up to 2,000 lbs. and 45 feet wide. Just like our AC Slider 100 we now offer an optional emergency foot pedal release.

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.

Specs

• Warranty 7 year Residential/ 5 Year Commercial
• Motor 24 VDC Brushless 1/2 HP Motor
• Maximum Gate Weight 2,000 lbs
• Maximum Gate Length 45 Feet
• Power Options 115/230 VAC Single Phase and 12/24 VDC Solar Panel
• Duty Cycle Continous Cycle
• Gear Box Ratio 10:1
• Width 12"
• Length 17.5"
• Height 23.5
• Gate Travel Speed 12 inches per second
• Operator Weight 130 lbs
• Cover Rotationally Molded – Indestructible
• Emergency Release Options Optional: Mechanical Foot pedal Release
• Battery Backup Integrated, with Two 7 Ah Batteries 12VDC
• Battery Backup Capacity Integrated with two 7AH batteries 12VDC
• Solar Capabilities 12VDC or 24VDC Solar Panel Input
• Belt Size 4L-300
• Main Sproket Size 41B22X7/8
• Limit Shaft Sprocket N/A
• Breaker Requirement 20 Amp Dedicated Breaker
• Temperature Range -40 to 160°

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

All-O-Matic SL-100FP AC Slide Gate Operator (SL-100FP AC)

All-O-Matic SL-100FP AC Slide Gate Operator

The SL-100FP AC is our most popular automatic gate operator. Affordable, slim and rated for continuous duty on gates up to 1000lbs. This is a 110 Volt AC device capable of years and years of reliable service. The SL-100FP AC was originally intended for applications like public storage facilities in the US. You can imagine those gates have to work all the time.

AC operators come with the simplest and most dependable control board in the industry thats backwards compatible. A powerful and durable motor that has been field tested for over 20 years. A Majority of AC operators now include an emergency foot pedal release and a built-in loop rack.

Specs

• Warranty Full 7 Year Residential, 5 Year Commercial
• Motor ½ HP
• Duty Cycle Continous
• Power Options 120 V AC
• Gear Box Ratio 20:1
• Cover Rotationally Molded – Indestructible
• Dimensions W: 12" - L: 17.5" – H: 23.5"
• Maximum Gate Length 40 Feet
• Maximum Gate Weight 1,000 lbs
• Gate Travel Speed 12 inches per sec
• Operator Weight 100 lbs
• Emergency Release Options Can be pushed open in the event of a power failure
• Battery Backup N/A

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

All-O-Matic SL-100FP DC Slide Gate Operator (SL-100FP DC)

All-O-Matic SL-100FP DC Slide Gate Operator

Designed to be the strongest, most durable DC gate Operator in its class. Allomatic’s long awaited SL-100FP DC has arrived. The SL-100FP DC gate operator utilizes an industry first brush less motor technology (no maintenance, high torque, and smooth quiet operation), total in house design, programming and construction. Equipped with a built in loop detector rack and enough power to operate all accessories on battery power. Manufactured with a heavy duty frame and parts that are made to last a life time, plus our industry leading warranty.

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brush less DC motors are smooth and quiet but are powerful and durable and require zero maintenance. As with most of our AC operators, our DC operators now include an emergency foot pedal release and a built in loop rack.

Specs

• Warranty Full 7 Year Residential, 5 Year Commercial
• Motor 24 VDC Brushless 1/2 HP Motor
• Maximum Gate Weight 2,000 lbs.
• Maximum Gate Length 45 Feet
• Power Options 115/230 VAC Single Phase and 12/24 VDC Solar Panel
• Duty Cycle Continous Cycle
• Gear Box Ratio 30:1
• Length 12"
• Height 17.5"
• Gate Speed 12 inches per second
• Weight 130 lbs
• Emergency Release Options Optional: Mechanical Foot Pedal
• Battery Back Up Integrated, with Two 7 Ah Batteries 12VDC
• Battery Back Up Capacity Up to 80 Cycles on a 1,000 lbs Gate
• Solar Capabilities 12VDC or 24VDC Solar Panel Imput
• Belt Size Reg: 4L-300 Foot Pedal: 4L-260
• Main Sprocket Size 41B22X7/8
• Limit Shaft Sprocket 41B15X5/8
• Breaker Requirement 20 Amp Dedicated Breaker
• Temperature Range -40 to 160°

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

All-O-Matic SL-45 DC Slide Gate Operator (SL-45 DC)

All-O-Matic SL-45 DC Slide Gate Operator

The SL-45 DC is the smallest most efficient and reliable residential DC gate operator in the industry. The SL-45 DC is small in size but enormous in performance. It's top of the line Planetary gearbox and Brushless DC Motor carries a tremendous advantage over the conventional gearboxes and brushed DC motor commonly used in the industry due to its compact size and its outstanding power transmission efficiency.

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.

Specs

• Warranty 5 Year Residential
• Motor 24 VDC Brushless Motor - Continuous Duty Cycle
• Duty Cycle Continous
• Power Options 120/220 VAC Single Phase
• Gear Box Ratio 28.93:1 Planetary Gearbox High Efficiency
• Cover Rotationally Molded – Indestructible
• Dimensions W: 11" – L: 14.5" – H 15.5"
• Maximum Gate Length 30 Feet
• Maximum Gate Weight 800 Lbs
• Gate Travel Speed 12 inches per sec
• Operator Weight 50 lbs
• Emergency Release Options Can be pushed open in the event of a power failure
• Battery Backup Integrated, Capable of up to 250 cycles on a 600lbs Gate Battery: Two 8 Ah Batteries 12VDC
• Solar Capabilities 12VDC or 24VDC Solar Panel Input

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

All-O-Matic SL-90 DC Slide Gate Operator (SL-90 DC)

All-O-Matic SL-90 DC Slide Gate Operator

The newly redesigned SL-90DC, Gate Operator, is equipped with a standard mechanical foot pedal release and larger gearbox with internal disconnect for higher gate capacity. Same compact size but it can now handle gates up to 1,600 lbs. and 50 feet long

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. Â The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.

Specs

• Warranty Full 7 Year Residential, 5 Year Commercial
• Motor 24 VDC Brushless Motor ½ HP - Continuous Duty Cycle
• Duty Cycle Continous
• Power Options 120/220 VAC Single Phase or 12/24V Solar panel
• Gear Box Ratio 20:1 with internal disconnect
• Cover Rotationally molded plastic (polyethylene)
• Dimensions W: 15.5" – L: 18.5" – H 16"
• Maximum Gate Length 50 Feet
• Maximum Gate Weight 1,600 lbs
• Gate Travel Speed 12 inches per sec
• Operator Weight 93 lbs
• Emergency Release Options Mechanical Foot Pedal Release
• Battery Backup Integrated, Capable of up to 150 cycles on a 1000lbs Gate Battery: Two 8 Ah Batteries 12VDC
• Solar Capabilities 12VDC or 24VDC Solar Panel Input

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Apollo Automatic Sliding Gate Openers:

**** The following is just a list of just some of the Nice (Apollo) automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Apollo automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

Nice (Apollo) 7251

Nice (Apollo) 7351

Nice (Apollo) 8300

Nice (Apollo) 8500

Nice (Apollo) 7000ETL

Nice (Apollo) 7100ETL

Nice (Apollo) 7200ETL

Nice (Apollo) 7300ETL

Nice (Apollo) 7500ETL

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice (Apollo) 7251 Post Mount Slide Gate Operator (7251)

Nice (Apollo) 7251 Slide Gate Operator

Post mounted operator for sliding gates up to 800 lbs weight and 25 ft length each. 7251 single gate application. Supplied with 35 feet #40 roller chain.

Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power.

Easily installed on most existing or new slide gates. The operator has practical adjustment of the limit switches and internal quick release system for manual operation. Uses the single/dual advanced 1050 circuit board.

Featured

• LCD display for easy programming, diagnosting and troubleshooting
• Innovative obstacle detection system
• Plug-in receiver: up to 1,000 rolling-code transmitters
• Smart management of the battery charging
• Integrated 7 day timer
• Master/slave management for two motors working together
• Protection against electrical surges
• Programmable inputs for external accessories
• Corrosion Resistant

Specs

• Power Supply 12VDC
• Operating Voltage 12VDC
• Current Draw 10mA (standby)
• Speed 1' per seconds
• Duty Cycle Varies based on charging capacity
• Dimensions 21.5 x 21 x 11.5 in.

To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice (Apollo) 7351 Pad Mounted Slide Gate Operator (7351)

Nice (Apollo) 7351 Pad Mounted Slide Gate Operator

Pad mounted operator for sliding gates up to 800 lbs weight and 25 ft length each. Recommended for high cycle residential an light commercial applications.

7351 single gate application. Supplied with 35 feet #40 roller chain. Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power.

Easily installed on most existing or new slide gates. The operator has practical adjustment of the limit switches and internal quick release system for manual operation. Uses the advanced 1050 circuit board.

Features

• LCD display for easy programming, diagnosting and troubleshooting
• Innovative obstacle detection system
• Plug-in receiver: up to 1,000 rolling-code transmitters
• Smart management of the battery charging
• Integrated 7 day timer
• Master/slave management for two motors working together
• Protection against electrical surges
• Programmable inputs for external accessories
• Corrosion Resistant

Specs

• Power Supply 12-30VDC
• Operating Voltage 12VDC
• Current Draw 10mA
• Speed 1 ft per second
• Duty Cycle Varies based on charging capacity
• Dimensions 20 L x 15 W x 26H

To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice (Apollo) 8300 Slide Gate Operator (8300)

Nice (Apollo) 8300 Slide Gate Operator

½ HP, 24 V motor, 120 Vac Slide Gate Operator. Operator for sliding gates up to 1000 lbs weight and 40 feet length.

Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.

Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.

Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.

Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard. Master/slave management: two units synchronized for dual application.

Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.

Features

• 24 V motors, 120 Vac main power.
• 1/2HP
• Easy to install
• LCD Display
• Plug-in receiver: up to 1,000 rolling-code transmitters
• 7 day programmable event timer
• Innovative Obstacle Detection System
• Surge Protection
• Programmable Inputs and Outputs
• Advanced Dual Gate Management
• Corrosion resistant

Specs

• Input Power: 120VAC
• Motor 24VDC 1/2 HP
• Maximum Speed 11 (in/s)
• Maximum Force 101 (lbf)
• Size 18.1 L x 18.5 W x 27.5 H
• Weight 110 lbs

To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice (Apollo) 8500 Slide Gate Operator (8500)

Nice (Apollo) 8500 Slide Gate Operator

1 HP, 24 V motor, 120 Vac Slide Gate Operator. Operator for sliding gates up to 1500 lbs weight and 40 feet length.

Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.

Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.

Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.

Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard. Master/slave management: two units synchronized for dual application.

Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.

Features

• 24 V motors, 120 Vac main power.
• 1HP Slide Gate Operator
• Easy to install
• LCD Display
• Plug-in receiver: up to 1,000 rolling-code transmitters
• 7 day programmable event timer
• Innovative Obstacle Detection System
• Surge Protection
• Programmable Inputs and Outputs
• Advanced Dual Gate Management
• Corrosion resistant

Specs

• Input Power: 120VAC
• Motor 24VDC 1 HP
• Maximum Speed 11 (in/s)
• Maximum Force 124 (lbf)
• Size 18.1 L x 18.5 W x 27.5 H
• Weight 115 lbs

To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Apollo 7000ETL Slide Gate Operator (7000ETL)

Apollo 7000ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 20', 600 lbs.
Pad mounted
Timer to close option
Adjustable limits
Available in dual gate model
Weather resistant
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Apollo 7100ETL Slide Gate Operator (7100ETL)

Apollo 7100ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 20', 600 lbs.
Post mounted
Timer to close option
Adjustable limits
Available in dual gate model
Weather resistant
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Apollo 7200ETL Slide Gate Operator (7200ETL)

Apollo 7200ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 30', 1000 lbs.
Post mounted
Available in dual gate model
Weather resistant
Timer to close option
Adjustable limits
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

*************

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Apollo 7300ETL Slide Gate Operator (7300ETL)

Apollo 7300ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 30', 1000 lbs.
Pad mounted
Available in dual gate model
Timer to close option
Adjustable limits
Weather resistant
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

**********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Apollo 7500ETL Slide Gate Operator (7500ETL)

Apollo 7500ETL Slide Gate Operator

Meets UL325 standards
Heavy Duty/Continuous Duty slide gate operators
Operates slide gates 30f.t long and 1000lbs.
Single Box compact design
Fully adjustable internal limits
Lockable external quick release
Post-mounted or, with additional fabrication, pad-mounted
12V DC motor, case harden worm gear capable of generating more than 1/2 HP.

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

GTO Automatic Sliding Gate Openers:

**** The following is just a list of just some of the GTO automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your GTO automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

GTO SL050

GTO PRO-SL2000B

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

GTO GP-SL050 Slide Gate Operator GTO GP-SL050

GTO GP-SL050 Slide Gate Operator

CAPACITY:

• The GP-SL050 is designed for operation of slide gates.
• Max Gate; Weight 800 lbs. (362.9 kg), Length 32 ft. (9.8 m) with a 27 ft. (8.3 m) opening.
• (For bi-parting dual gates, a second operator is required).
• Assumes gate to be free sliding, in good working condition, and on a level plane.

MECHANICAL SPECIFICATIONS:

• AC Powered with inherent UPS (Uninterrupted Power System / Battery Backup) gate operation and all DC powered counters /safety devices.
• On board 12 V DC power delivers 300 Amp UPS
• 120 Vac 60 Hz built in power receptacles (1 amp rated)
• 25:1 direct drive worm gear with totally enclosed gear reduction
• 2500 RPM, 24V brushless DC motor - 1/2 HP. equivalent
• Operating temp 5 F (-28C) to +160 F (71 C)
• Non back-drive gearbox with ball bearing output shaft
• #41 Chain
• 12” per second maximum travel speed
• Weatherproof high density ABS, UV resistant cover
• Heavy Duty Steel Chassis

ELECTRICAL SPECIFICATIONS:

• GTO’s advanced technology commercial control board
• Digital / optical limits with fine adjustment JOG push buttons for easy and accurate setting of limits
• 100% solid-state motor controls circuitry
• APS (Absolute Position System) tracking system
• On board 3-Push button control station
• Operation, diagnostic and safety alarms, reverse sensor system
• Visual LED and audible diagnostic indicators
• Plug-in loop detector inputs for exit, shadow and safety loops
• Smooth start / smooth stop—for long mechanical life expectancy
• Built in power management system utilizing a high effiency switchmode power supply.
• (AC power supply, audible and visual low battery indicators, no loss of functionality in battery back up mode)
• Auto close adjustable 3-120 seconds delay
• Fail Safe or Fail Secure DIP switch selectable for low battery operation
• 12 Vdc, 300mA (.3 Amp), poly fuse protected auxiliary power output

DIMENSIONS:

• Height: 27”
• Depth: 18”
• Width: 15”
• SHIPPING WEIGHT: 74 lbs. (39 kg) Meets UPS shipping standards.

WARRANTY:

• 7 year residential application

CLASS OF OPERATION:

• Class I, II, III, IV

SAFETY LISTINGS:

• System Certified with UL325 5th Edition safety standards, ETL listed

DUAL GATE APPLICATIONS:

• The GP-SL050 is dual gate capable via communication link wires (14 – 20 gauge multi stranded 2-wire shielded

To get on our schedule for your GTO sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

GTO PRO-SL2000B Slide Gate Operator GTO PRO-SL2000B

GTO PRO-SL2000B Slide Gate Operator

The GTO/PRO PRO-SL2000B series will handle gates weighing up to 1000 lbs. (453.6 kg) and 30 ft. (9.1 m) in length with a 20 ft. (6.1 m) opening, if all proper installation procedures have been followed. Note: ball bearing rollers should be used on all gates.

FEATURES:

• Full systems capable “add on ready” heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0–120 seconds).
• Includes a built-in internal friction disc brake/lock.
• Easy to install 4 ft. (1.2 m) post mounts (2) provided.
• Chain disconnect for manual operation.
• Light professional and residential cycle rated to 100 cycles daily.

MECHANICAL:

• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: 1 ft. (.31 m) per second.
• #41 Chain 32 ft. with master link.
• Fully compatible accessory terminal block provides connectionsfor safety loops, wands, intercoms, card readers, phone systems.
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.

ELECTRICAL/POWER:

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input and 18VAC at 40 VA. output, transformer rectified to 14V DC through control board
• Powered by a reliable 12 Volt (1/4 HP equivalent) DC motor, casehardened steel gear reducer.
• Charging regulated circuit on control board. “Sleep draw” is 40mA; “active draw” is 2 to 9 amps.

DIMENSIONS:

• Height: 18 ̋
• Depth: 11 ̋
• Width: 21.5

SHIPPING WEIGHT:

• 70 lbs. (32 kg) Meets UPS shipping standards

WARRANTY:

• 2 Year (RESIDENTIAL application)

CLASS OF OPERATION:

• Class I, II, III, IV

SAFETY LISTINGS:

• System Certified with UL325 5th Edition safety standards, ETL listed.

OPTIONS:

• Solar Power: Requires a 24 Amp hour battery (not included).10-watt Solar Panel
• Charger:float voltage 14.5 V DC output from 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
• Pad Mount: requires the Pad Mounting Plate (SGMP).Dual Gates: For dual gate applications, add model PRO-SL2200B

To get on our schedule for your GTO sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear Automatic Sliding Gate Openers:

**** The following is just a list of just some of the Linear automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Linear automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

Linear GSLG-A

Linear HSLG

Linear VS-GSLG

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear GSLG-A Series Slide Gate Operator (GSLG-A)

Linear GSLG-A Series Slide Gate Operator

The GLSG-A is a heavy duty slide gate operator for commercial and industrial applications.

Cabinet

• Weather-resistant galvannealed steel cabinet with powder coat finish
• Lockable, gasketed, hinged and removable front cover for easy access

Mechanical

• Heavy-duty 15:1 right angle C-face gear reducer
• #50 roller chain and sprocket
• Adjustable torque limiter
• Heavy-duty pillow-block bearings

Mounting

• 3 - 3 1/2" OD post mounting
• Optional pad mounting pedastal availiable

Control Circuit

• Solid state circuit board, 24 VDC
• Inherent current sensing system
• 15 LEDs for easy setup and troubleshooting
• Built in maximum run timer and auto close timer
• Right-hand/left-hand easy conversion
• Entrapment alarm

ELECTRICAL

• 1/2, 3/4 or 1 hp, 115 or 230 VAC, single phase, thermally protected, heavy- duty C-face PSC motor
• 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy duty motor
• Double C-face brake
• Power on/off switch
• Emergency stop/reset button on front coverlinear gslg
• Duplex receptacle on 115 VAC units
• Three-button control station included
• Accessory connections are 24-volt AC or DC
• Easily adjustable rotary limit switches
• Full system capable for access controls and reversing devices

Capacities:

• 1/2 HP - MAXIMUM GATE WEIGHT 1100 LBS. or MAXIMUM GATE LENGTH 45 FT.
• 3/4 HP - MAXIMUM GATE WEIGHT 1400 LBS. or MAXIMUM GATE LENGTH 60 FT.
• 1 HP - MAXIMUM GATE WEIGHT 2200 LBS. or MAXIMUM GATE LENGTH 78 FT.

To get on our schedule for your Linear sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear HSLG Series Slide Gate Operator (HSLG)

Linear HSLG Series Slide Gate Operator

The HSLG is a continuous-duty slide gate operator for commercial and industrial applications.

Cabinet

• Weather-resistant galvannealed steel cabinet with powder coat finish
• Lockable, gasketed, hinged and removable front cover for easy access

Mechanical

• #40 roller chain and sprockets
• Adjustable torque limiter
• Heavy-duty pillow-block bearings
• Efficient double V-belt drive

Mounting

• 3 - 3 1/2" OD post mounting
• Optional pad mounting pedestal available

Control Circuit

• Solid state circuit board, 24 VDC
• Inherent current sensing system
• 15 LEDs for easy setup and troubleshooting
• Built in maximum run timer and auto close timer
• Right-hand/left-hand easy conversion
• Entrapment alarm

Warning Signals

• Continuous tone entrapment alarm
• Warning beeper to sound when gate is moving
• Pre-start audio/visual outputs included

ELECTRICAL

• 1/2, 3/4 or 1 hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty PSC motor
• 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor
• Magnetic solenoid disc brake
• Power on/off switch
• Emergency stop/reset button on front coverlinear hs
• Duplex receptacle on 115 VAC units
• Three-button control station included
• Accessory connections are 24-volt AC or DC
• Easily adjustable rotary limit switches
• Full system capable for access controls and reversing devices

MECHANICAL FEATURES:

• Heavy duty zinc plated steel chassis
• Easily operated emergency manual disconnect handle
• Sleek and sturdy UV-stabilized polyethylene cover
• #41 drive chain - 31' included with the operator
• Universal pad mount standard - optional post mount kit available

MODEL SLD EXCLUSIVE FEATURES:

• Full DC powered operator with built in battery backup
• Continuous duty 1/2 HP DC permanent magnet motor
• Powered by 115V or 24VDC supply
• Seamless transition to battery backup mode when AC power fails
• Selectable fail-safe or fail-secure modes of operation
• Solar power capable

Capacities:

• 1/2 HP - MAXIMUM GATE WEIGHT 1100 LBS. or MAXIMUM GATE LENGTH 35 FT.
• 3/4 HP - MAXIMUM GATE WEIGHT 1200 LBS. or MAXIMUM GATE LENGTH 45 FT.
• 1 HP - MAXIMUM GATE WEIGHT 1700 LBS. or MAXIMUM GATE LENGTH 55 FT.

To get on our schedule for your Linear sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear VS-GSLG Series Slide Gate Operator (VS-GSLG)

Linear VS-GSLG Series Slide Gate Operator

The VS-GSLG is a variable speed slide gate operator for heavy-duty commercial and industrial applications for 45 ft to 100 ft gates weighing 1100 lbs to 4000 lbs.. There are many different models to specifically fit your specific gate.

Cabinet
* Weather-resistant galvannealed steel cabinet with powder coat finish
* Lockable, gasketed, hinged and removable front cover for easy access

Mechanical
* Heavy-duty 10:1 right angle C-face gear reducer
* #50 roller chain and sprocket
* Adjustable torque limiter
* Heavy-duty pillow-block bearings

Mounting
* 3 - 3 1/2" OD post mounting
* Optional pad mounting pedestal available

Control Circuit
* Solid State circuit board, 24VDC
* Multiple LEDs for easy setup and troubleshooting
* Built in maximum run timer and auto close timer
* Right hand/left hand easy conversion
* Master/Slave - simple three-wire connection

Electrical
* Variable speed - soft start/soft stop programmable through an inverter motor control (Voltage and phase of input required at time of order)
* Availiable from 1/2 HP to 2 HP industrial continuous duty, three-phase, 56 frame motors
* Availiable in all standard voltages and phases
* Maximum run timer for clutch and motor protection
* Double C-face brake
* Power on/off switch
* Duplex receptacle on 115VAC units
* Three-button control station included
* Accessory connections are 24-volt AC and DC
* Easily adjustable rotary limit switches
* Full system capable for access controls and reversing device

To get on our schedule for your Linear sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing Automatic Sliding Gate Openers:

**** The following is just a list of just some of the DoorKing automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your DoorKing automatic sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

DoorKing DKS9050

DoorKing DKS9100

DoorKing DKS9150

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS9050 Slide Gate Operator (DKS9050)

DoorKing DKS9050 Slide Gate Operator

The Model 9050 operators are designed to operate vehicular slide gates in residential and light-duty commercial applications only. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements.

Model 9050-080

• Maximum gate length 16-feet.
• Maximum gate weight 300 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
• 1/2 HP limited-duty motor.
• 115 VAC, 4.3 Amps.
• Class I applications.
• Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
• 12"W x 24"H x 11.5"D

Options Availiable

• #40 chain.
• Nickel plated chain.
• Stainless steel chain.
• Plug-in loop detectors.
• Heater kit for cold environments.
• Base plate to post mount this operator (does not include posts).
• Surge suppressors.

To get on our schedule for your DoorKing sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS9100 Slide Gate Operator (DKS9100)

DoorKing DKS9100 Slide Gate Operator

The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.

• Self-adjusting, no maintenance magnetic limits.
• Partial-open feature.
• Anti-tailgating feature.
• Gate tracker reporting output.
• Ports for plug-in loop detectors.
• Two convenience outlets.
• Fail-safe release (fail-secure optional).
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.

Model 9100-080

• Maximum gate length 30-feet.
• Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
• 1/2 HP continuous-duty motor.
• 115 VAC, 5.4 Amps.
• Operator is shipped with chain brackets and 20-feet of #41 chain.
• Class I, II, III and IV applications.
• Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
• Dimensions: 12"W x 24"H x 11.5"D

Options Availiable

• #40 chain.
• Nickel plated chain.
• Stainless steel chain.
• Plug-in loop detectors.
• Heater kit for cold environments.
• Base plate to post mount this operator (does not include posts).
• Surge suppressors.

To get on our schedule for your DoorKing sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

***********

S.O.S Automatic Sliding Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS9150 Slide Gate Operator (DKS9150)

DoorKing DKS9150 Slide Gate Operator

Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

• Self-adjusting, no maintenance magnetic limits.
• Partial-open feature.
• Anti-tailgating feature.
• Gate tracker reporting output.
• Ports for plug-in loop detectors.
• DC Powered Convenience Open (Optional).
• Two convenience outlets.
• Fail-safe release (fail-secure optional).
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.

Model 9150-084 with 1/2 HP Motor

• Maximum gate length 30-feet.
• Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
• 1/2 HP continuous-duty motor.
• 115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Operator is shipped with chain brackets and 20-feet of #40 chain.
• Class I, II, III and IV applications.
• Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
• Dimensions: 15"W x 24"H x 16.5"D

Model 9150-080 with 1 HP Motor

• Maximum gate length 45-feet.
• Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
• 1 HP continuous-duty motor.
• 115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Operator is shipped with chain brackets and 20-feet of #40 chain.
• Class I, II, III and IV applications.
• Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
• Dimensions: 15"W x 24"H x 16.5"D

Options Availiable

• DC powered convenience open.
• Nickel plated chain.
• Stainless steel chain.
• Plug-in loop detectors.
• Heater kit for cold environments.
• Base plate to post mount this operator (does not include posts).
• Surge suppressors.

To get on our schedule for your DoorKing sliding gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster Automatic Barrier Arm Gate Openers:

********** The following is just a small list of some Liftmaster automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Liftmaster automatic barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day *********

Liftmaster MEGA ARM

Liftmaster MEGA ARM TOWER

Liftmaster MEGA ARM SPRINT

Liftmaster MEGA ARM SPRINT TOWER

Liftmaster BG770

Liftmaster BG790 WISHBONE

***********

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster MEGA ARM DC Barrier Arm Gate Operator MA

Liftmaster MEGA ARM DC Barrier Arm Gate Operator

Liftmaster® high-traffic DC powered barrier gate operators with Battery Backup keep traffic flowing and provide easy in and out access 24 hours a day. Rated for 6,000 cycles per day with an opening time of 2.5 seconds and constructed of corrosion resistant aluminum alloy, the Mega Arm/Mega Arm Tower are the ideal choice for high-traffic applications. The product’s Security+ 2.0® radio technology provides unparalleled reliability and quick, secure access. Optional LED Barrier Arm provides exceptional visibility 24 hours a day.

Performance

• Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
• Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
• Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
• Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
• Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
• Sequenced Access Management provides control between barrier and slide/swing gate operators to maximize traffic flow.
• K1 Relay provides output signals to activate other accessories or operators during open/close cycles.

Safety and Security

• Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
• Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
• Anti-Tailgate Feature prevents unauthorized access to your property.
• Built-in Surge Suppression protects against high-voltage spikes and surges.

Features

• Dual-Gate Operation Works in conjunction with another barrier gate operator.
• Built-In 110V Convenience Outlet Simplifies adding/powering up accessory devices. Save the expense of having to add an extra outlet.
• Universal Controller With 8 Inputs Allows for the connection of a full range of optional external devices.
• Right or Left Handed Operation Provides flexibility to fit your application and ease of installation.
• Slip Clutch Option Allows arm to be manually pushed open without damaging the shear pin. Arm automatically resets to normal closed position upon receiving activation.
• 850LM Radio Receiver Included Stores up to 90 remote controls.
• Warranty Two years parts. Ten years frame.

Specifications

• Operator Speed 2.5 seconds to open or close
• Power 120V / 220V applications
• Accessory Power 24VDC 500 mA
• Operator Weight (without arm) MADCBB3 – 89 lbs. MATDCBB3 – 113 lbs.
• UL Listed UL 325 & UL 991 – Class I, II, III, IV

Construction

• Gear Reduction 60:1 reducer in synthetic oil bath
• Motor 1/2 HP equivalent Continuous-duty 24VDC / 800 RPM
• Chassis Powder coated 1/4 in. aluminum alloy
• Cover MA – UV-resistant polyethylene MAT – Full aluminum cabinet

Recommended Capacities

• HP 1/2
• MAX ARM LENGTH 12ft. & 17ft. Aluminum Arm and 14ft. Soft-Padded arm
• MAX CYCLES/DAY 6,000

LiftMaster® gate operators comply with UL 325 standards. External entrapment devices must be added to meet UL 325 standards. Your installer will recommend suitable entrapment devices such as photoelectric sensors or edge sensors.

LED Barrier Arm Specifications

• Arm Material Aluminum
• Operating Voltage 12VDC
• Lamp Type LED 3528 IP68 Silica gel filled
• Color Red/White
• Power 14.4 W/m
• Operating Temperature -13°F (-25°C) to 140°F (60°C)
• UL Listed UL 325 & UL 991 – Class I, II, III, IV
• Warranty Six month limited.

MALED12

• Arm - 12 ft. x 3 in. x 2 1/4 in., 17 lbs. (10 ft. 9-3/4 in. installed)
• Contents (1) 12 ft. Arm with LED (1) Installation Kit

MALED17

• Arm 17 ft. x 3 in. x 2 1/4 in., 25 lbs. (14 ft. installed)
• Requires Counterweight (MALEDCW)
• Contents (1) 17 ft. Arm with LED (1) Installation Kit

MALEDCW

• Counterweight 14 in. x 2 3/4 in. x 2 1/8 in., 11 lbs.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster MEGA ARM TOWER DC Barrier Arm Gate Operator MAT

Liftmaster MEGA ARM TOWER DC Barrier Arm Gate Operator

LiftMaster® high-traffic DC powered barrier gate operators with Battery Backup keep traffic flowing and provide easy in and out access 24 hours a day. Rated for 6,000 cycles per day with an opening time of 2.5 seconds and constructed of corrosion resistant aluminum alloy, the Mega Arm/Mega Arm Tower are the ideal choice for high-traffic applications. The product’s Security+ 2.0® radio technology provides unparalleled reliability and quick, secure access. Optional LED Barrier Arm provides exceptional visibility 24 hours a day.

Performance

• Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
• Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
• Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
• Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
• Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
• Sequenced Access Management provides control between barrier and slide/swing gate operators to maximize traffic flow.
• K1 Relay provides output signals to activate other accessories or operators during open/close cycles.

Safety and Security

• Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
• Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
• Anti-Tailgate Feature prevents unauthorized access to your property.
• Built-in Surge Suppression protects against high-voltage spikes and surges.

Features

• Dual-Gate Operation Works in conjunction with another barrier gate operator.
• Built-In 110V Convenience Outlet Simplifies adding/powering up accessory devices. Save the expense of having to add an extra outlet.
• Universal Controller With 8 Inputs Allows for the connection of a full range of optional external devices.
• Right or Left Handed Operation Provides flexibility to fit your application and ease of installation.
• Slip Clutch Option Allows arm to be manually pushed open without damaging the shear pin. Arm automatically resets to normal closed position upon receiving activation.
• 850LM Radio Receiver Included Stores up to 90 remote controls.
• Warranty Two years parts. Ten years frame.

Specifications

• Operator Speed 2.5 seconds to open or close
• Power 120V / 220V applications
• Accessory Power 24VDC 500 mA
• Operator Weight (without arm) MADCBB3 – 89 lbs. MATDCBB3 – 113 lbs.
• UL Listed UL 325 & UL 991 – Class I, II, III, IV

Construction

• Gear Reduction 60:1 reducer in synthetic oil bath
• Motor 1/2 HP equivalent Continuous-duty 24VDC / 800 RPM
• Chassis Powder coated 1/4 in. aluminum alloy
• Cover MA – UV-resistant polyethylene MAT – Full aluminum cabinet

Recommended Capacities for 1/2 HP

• MAX ARM LENGTH (ft.) 12ft. & 17ft. Aluminum Arm 14ft.
• CYCLES/DAY Soft-Padded arm. 6,000

LiftMaster® gate operators comply with UL 325 standards. External entrapment devices must be added to meet UL 325 standards. Your installer will recommend suitable entrapment devices such as photoelectric sensors or edge sensors.

LED Barrier Arm Specifications

• Arm Material Aluminum
• Operating Voltage 12VDC
• Lamp Type LED 3528 IP68 Silica gel filled
• Color Red/White
• Power 14.4 W/m
• Operating Temperature -13°F (-25°C) to 140°F (60°C)
• UL Listed UL 325 & UL 991 – Class I, II, III, IV
• Warranty Six month limited.

MALED12

• Arm 12 ft. x 3 in. x 2 1/4 in., 17 lbs. (10 ft. 9-3/4 in. installed)
• Contents (1) 12 ft. Arm with LED (1) Installation Kit

MALED17

• Arm 17 ft. x 3 in. x 2 1/4 in., 25 lbs. (14 ft. installed)
• Requires Counterweight (MALEDCW)
• Contents (1) 17 ft. Arm with LED (1) Installation Kit

MALEDCW

• Counterweight 14 in. x 2 3/4 in. x 2 1/8 in., 11 lbs.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster MEGA SPRINT DC Barrier Arm Gate Operator MAS

Liftmaster MEGA SPRINT DC Barrier Arm Gate Operator

The Mega Arm Sprint is a DC-powered, high-speed addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional speed, making it ideal for parking applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.

No power? No problem! Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.

Standard Features:

• Radio receiver built-in
• Aluminum alloy chassis
• Built-in battery backup
• Soft start/stop
• DC operator system
• Right or left-handed operation
• Breakaway arm
• Control inputs
• Inherent obstruction sensing
• LED indicators
• Dual gate operation
• Dynamic braking
• Magnetic sensors
• Timer to close
• 2-year warranty for electronics and mechanism;
• 10-year warranty for chassis and cover

Performance

• Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
• Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
• Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
• Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
• Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
• Sequenced Access Management provides control between barrier and slide/ swing gate operators to maximize traffic flow
• K1 Relay provides output signals to activate other accessories or operators during open/close cycles

Safety and Security

• Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
• Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
• Anti-Tailgate Feature prevents unauthorized access to your property.
• Built-in Surge Suppression protects against high-voltage spikes and surges.

*Basic set up with remote controls programmed with a 12 ft. Barrier Arm. Does not include power draw from added accessories. Liftmaster low power draw accessories recommended to extend cycles on Battery Backup.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster MEGA SPRINT TOWER DC Barrier Arm Gate Operator MAST

Liftmaster MEGA SPRINT TOWER DC Barrier Arm Gate Operator

The Mega Arm Sprint Tower is a DC-powered, high-speed addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional speed, making it ideal for parking applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.

No power? No problem! Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.

Barrier arms sold separately

Standard Features:

• Radio receiver built-in
• Aluminum alloy chassis
• Built-in battery backup
• Soft start/stop
• DC operator system
• Right or left-handed operation
• Breakaway arm
• Control inputs
• Inherent obstruction sensing
• LED indicators
• Dual gate operation
• Dynamic braking
• Magnetic sensors
• Timer to close
• 2-year warranty for electronics and mechanism;
• 10-year warranty for chassis and cover

Performance

• Get on and off your property even when the power’s out with our Battery Backup feature and ultra-efficient power management system.
• Get durable protection and easy service access with the Aluminum Alloy Cover.
• Extend the life of the Operator with soft start/stop and a powerful 24V DC Motor.
• Rated for gates up to 10,000 cycles per day.

Safety and Security

• With our built-in Security+ 2.0® interference-eliminating technology, you can be confident that your property is secure and only your remote will open and close your gate.
• Emergency access compliant so first responders can have access if they need it.
• Know when your gate is about to open or close with a pre-motion warning.
• UL/cUL Listed tested to the most stringent industry guidelines.
• LiftMaster Gate Operator complies with UL325 standards. Secondary entrapment devices must be added to meet UL325 standards. Your Installer will recommend suitable secondary entrapment devices such as photo eyes or edge sensors.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster BG770 Barrier Arm Gate Operator BG770

Liftmaster BG770 Barrier Arm Gate Operator

The LiftMaster® BG770 offers reliable performance barrier gate operator for industrial applications such as airports, parking garages, and manufacturing plants.

All LiftMaster Openers, Operators, and Systems should be professionally installed.

Performance

• Get durable protection and easy service access with the lockable Weather-Resistant Steel Cover.
• Extend the life of the Operator with powerful AC Motor.
• Rated for gates up to 25 cycles per hour.

Safety and Security

• With our built-in Security+ 2.0® interference-eliminating technology, you can be confident that your property is secure and only your remote will open and close your gate.
• UL/cUL Listed tested to the most stringent industry guidelines.
• LiftMaster Gate Operator complies with UL325 standards. Secondary entrapment devices must be added to meet UL325 standards. Your Installer will recommend suitable secondary entrapment devices such as photo eyes or edge sensors.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster BG790 Wishbone Barrier Arm Gate Operator BG790

Liftmaster BG790 Wishbone Barrier Arm Gate Operator

When an application calls for a barrier gate, LiftMaster's BG790 has the reliability and features you require for a commercial installation. The BG790 can be utilized in a high traffic area or integrated with another style gate to create a trap.

All Liftmaster Openers, Operators, and Systems should be professionally installed.

Performance

• Supports up to 25 cycles per hour.
• Controls the speed of your door with a Heavy-Duty Gear Reducer.
• Resists the elements with an 11-Gauge Steel-Cabinet with Weather Resistant Baked-on Powder Coat Finish.
• Easily access the interior of the Operator with removable top and side panels.
• Provides simple access to electrical controls in a separate removable enclosure.
• Offers ample power with a 24VAC Control Circuit.
• Applies Open/Close functions with the standard two-push-button control station.
• Controls the power to the board with a Power Input On/Off Switch.
• Supports an additional accessory with one 115VAC Accessory outlet (on 115VAC models only).
• Features an Industrial-Size 0 Across-the-line Reversing Starter.
• Easily install and maintain the Operator with a fully adjustable limit system.
• Allows for Pad Mount installation.
• Includes Wishbone Arm (24 feet) and Counterweight are provided (max. length).

Safety and Security

• Access your facility quickly and safely with Security+ 2.0™ Technology, which virtually eliminates interference and offers up to 2X the range of standard remotes.
• Stores up to 90 remotes with the built-In 850LM Security+ 2.0™ receiver. o Receiver stores up to 90 remotes
• Compatible with most access control devices and safety accessories.
• Supports Optional LiftMaster® Plug-in Style Loop Detectors for Exit and Hold Open Loops.
• Compliant to all UL 325 standards for Class I, II, III and IV.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Apollo Automatic Barrier Arm Gate Openers:

********** The following is just a small list of some Apollo automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Apollo automatic barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day *********

Nice Apollo LBAR

Nice Apollo M3BAR

Nice Apollo M5BAR

Nice Apollo M7BAR

***********

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice(Apollo) LBAR Barrier Arm Gate Operator LBAR

Operator 24 Vdc for bars up to 29.5 ft. Steel case with protective cataphoresis treatment and paint finish.

Operator 24 Vdc for bars up to 29.5 ft. Steel case with protective cataphoresis treatment and paint finish.

Modular: bars are easily assembled using the aluminum expansion joint. Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover.
• Encoder movement control and electromechanical limit switches.

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks.
• Rapid and easy access to the control unit located in the upper section of the barrier body.
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.3A
• Power 24VDC
• Torque 400
• Cycles/Hour 150
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice(Apollo) M3BAR Barrier Arm Gate Operator M3BAR

Operator 24 Vdc for bars up to 13.1 ft. or 16.5 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.

Modular:

• bars are easily assembled using the aluminum expansion joint.
• Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover
• Encoder movement control and electromechanical limit switches

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks
• Rapid and easy access to the control unit located in the upper section of the barrier body
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.1A
• Power 24VDC
• Torque 200
• Cycles/Hour 350
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice(Apollo) M5BAR Barrier Arm Gate Operator M5BAR

Operator 24 Vdc for bars up to 13.1 ft. or 16.5 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.

Modular: bars are easily assembled using the aluminum expansion joint. Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover
• Encoder movement control and electromechanical limit switches

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks
• Rapid and easy access to the control unit located in the upper section of the barrier body
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.1A
• Power 24VDC
• Torque 200
• Cycles/Hour 350
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Nice(Apollo) M7BAR Barrier Arm Gate Operator M7BAR

Operator 24 Vdc for bars up to 16.5, 19.7 or 23 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.

Modular:

• bars are easily assembled using the aluminum expansion joint
• Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover
• Encoder movement control and electromechanical limit switches

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks
• Rapid and easy access to the control unit located in the upper section of the barrier body
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.1A
• Power 24VDC
• Torque 300
• Cycles/Hour 200
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear Automatic Barrier Arm Gate Openers:

********** The following is just a small list of some Linear automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Linear automatic barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day *********

Linear BGU

Linear BGU-D

Linear BGU-S

***********

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear BGU Barrier Arm Gate Operator BGU

Linear BGU Series Barrier Gate Operators

Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.

Ratings

• Maximum duty cycle: Continuous

Features

• Integral APeX Controller
• Power on/off switch
• Duplex receptacle (115 VAC units only)
• On-board APeX Controller three-button control station
• All accessory connections 24 VDC
• Easily adjustable cam-operated limit switches
• Lockable and removable front cover for easy access
• Built-in maximum run timer and auto close timer
• Master/second with simple 3-wire connection
• Dual V-belt
• Heavy-duty right angle gear reducer
• Heavy-duty harmonic link with oil impregnated bronze bushings
• Gate arm clamp with breaker bar
• Motor has manually-resettable overload
• Full system capable for access control and reversing devices
• Weather resistant galvanized steel cabinet with powder coat finish

Arm Options

• 10 foot wood arm
• 12 foot wood arm
• 14 foot wood arm

Factory Options

• White or yellow powder coat finish
• Optional thermostatically-controlled strip heater
• Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present

Warranty

• 5 years

To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear BGU-D Barrier Arm Gate Operator BGU-D

Linear BGU-D Series Barrier Gate Operators

For traffic control and parking applications, available in 1/2 horsepower, 115V supply voltage, various arm lengths.

Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.

The BGU-D has programmable fail safe or fail secure operation. With fail safe selected, when the gate operator senses AC power is no longer present, the arm will cycle open, remaining open until AC power is restored. With fail secure selected, during a power failure the BGU-D continues normal operation while monitoring the battery level. Once the batteries are low, the unit will cycle open until AC power is restored or the batteries receive a full charge via optional solar panels.

Ratings

• Maximum duty cycle: Continuous

Features

• Integral APeX Controller
• 24 VDC permanent magnet motor
• 115 VAC supply converted to 24 VDC for motor and controls
• Dual batteries charged by 115 VAC or optional solar panels
• On-board APeX Controller three-button control station
• Power on/off switch
• All accessory connections 24 VDC
• Easily adjustable cam-operated limit switches
• Lockable and removable front cover for easy access
• Built-in maximum run timer and auto close timer
• Master/second with simple 3-wire connection
• Dual V-belt
• Heavy-duty right angle gear reducer
• Heavy-duty harmonic link with oil impregnated bronze bushings
• Gate arm clamp with breaker bar
• Full system capable for access control and reversing devices
• Weather resistant galvanized steel cabinet with powder coat finish

Arm Options

• 10 foot wood arm
• 12 foot wood arm
• 14 foot wood arm

Factory Options

• White or yellow powder coat finish
• Optional thermostatically-controlled strip heater
• Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present

Warranty

• 5 years

To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear BGU-S Barrier Arm Gate Operator BGU-S

Linear BGU-S Series Barrier Gate Operators

For traffic control and parking applications, available in 1/2 horsepower, 115V supply voltage, various arm lengths.

Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.

The BGU-S has programmable fail safe or fail secure operation. With fail safe selected, when the gate operator senses AC power is no longer present, the arm will cycle open, remaining open until AC power is restored. With fail secure selected, during a power failure the BGU-S continues normal operation while monitoring the battery level. Once the batteries are low, the unit will cycle open until AC power is restored or the batteries receive a full charge via optional solar panels.

Ratings

• Maximum duty cycle: Continuous

Features

• Integral APeX Controller
• 24 VDC permanent magnet motor
• 115 VAC supply converted to 24 VDC for motor and controls
• Dual batteries charged by 115 VAC or optional solar panels
• On-board APeX Controller three-button control station
• Power on/off switch
• All accessory connections 24 VDC
• Easily adjustable cam-operated limit switches
• Lockable and removable front cover for easy access
• Built-in maximum run timer and auto close timer
• Master/second with simple 3-wire connection
• Dual V-belt
• Heavy-duty right angle gear reducer
• Heavy-duty harmonic link with oil impregnated bronze bushings
• Gate arm clamp with breaker bar
• Full system capable for access control and reversing devices
• Weather resistant galvanized steel cabinet with powder coat finish

Arm Options

• 10 foot wood arm
• 12 foot wood arm
• 14 foot wood arm

Factory Options

• White or yellow powder coat finish
• Optional thermostatically-controlled strip heater
• Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present
• Warranty 5 years

To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing Automatic Barrier Arm Gate Openers:

********** The following is just a small list of some DoorKing automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your DoorKing automatic barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day *********

DoorKing DKS 1601

DoorKing DKS 1602

DoorKing DKS 1603 Spike System

DoorKing DKS 1610 Traffic Spikes

DoorKing DKS 1610 Warning Light

DoorKing DKS 1610 Warning Signs

***********

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS 1601 Barrier Arm Gate Operator DKS 160

DoorKing DKS 1601 Barrier Gate Operator

The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications. The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

• Magnetic limit control.
• Ports for plug-in loop detectors.
• Automatic sequencing inputs for use with slide and swing gate operators.
• Up input memory buffer.
• Down memory option.
• Multiple up commands.
• Two convenience outlets.
• 360° gear box rotation.
• Gate tracker reporting output.
• Programming switches.
• Built-in power On/Off switch.
• Left or right hand mount.
• 1/2 HP continuous-duty motor.
• 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• 40:1 gear-box running in a continuous oil bath.
• Arm rotates 90° in approximately 1.5 seconds.
• Class II, III and IV applications.
• Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
• Dimensions (operator only): 15.25"W x 39.75"H x 14.75"D.

Options Availiable

• DC powered convenience open.
• 14-foot round aluminum arm.
• 14-foot wood arm.
• Wood arm folding bracket for low headroom.
• 12-foot plastic arm.
• Plastic arm folding bracket for low headroom.
• Foam padding for aluminum or wood arm.
• Plug-in loop detectors.
• Heater kit.
• Fan kit.
• Surge suppressors.

To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS 1602 Barrier Arm Gate Operator DKS 1602

DoorKing DKS 1602 Barrier Gate Operator

The 1602 operator is designed for traffic lanes up to 20-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

• Magnetic limit control.
• Ports for plug-in loop detectors.
• Automatic sequencing inputs for use with slide and swing gate operators.
• Up input memory buffer.
• Down memory option.
• Multiple up commands.
• Two convenience outlets.
• 360° gear box rotation.
• Gate tracker reporting output.
• Programming switches.
• Built-in power On/Off switch.
• Left or right hand mount.
• 1 HP continuous-duty motor.
• 60:1 gear-box running in a continuous oil bath.
• 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Arm rotates 90° in approximately 5.5 seconds.
• Class III and IV applications.
• Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
• Dimensions (operator only): 15.25"W x 39.75"H x 15.75"D.

Options Availiable

• DC powered convenience open.
• 20-foot three-piece wood arm - counter balanced.
• Plug-in loop detectors.
• Heater kit.
• Fan kit.
• Surge suppressors.

To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS 1603 Barrier Gate Spike System Gate Operator DKS 1603

DoorKing DKS 1603 Barrier Gate Spike System

The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete 1603 / auto-spike system consist of several different components. A typical system will require a 1603 operator, transfer box (transfer box is factory installed to the 1603 operator), tunnel section(s) as needed, spike section(s) as needed, end cap. A traffic signal and/or warning sign is required with this system.

• Magnetic limit control.
• Ports for plug-in loop detectors.
• Automatic sequencing inputs for use with slide and swing gate operators.
• Up input memory buffer.
• Down memory option.
• Multiple up commands.
• Two convenience outlets.
• Gate tracker reporting output.
• Programming switches.
• Built-in power On/Off switch.
• Left or right hand mount.
• 1/2 HP continuous-duty motor.
• 115, 230°, 460° VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• 40:1 gear-box running in a continuous oil bath.
• Arm rotates 90° in approximately 1.5 seconds.
• Class II, III and IV applications.
• Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
• Dimensions: 15.25"W x 43.75"H x 14.75"D.

Spike Component

• Tunnel sections surface mount: 31"W x 3"H x 24 or 36"L
• Spike sections surface mount: 31"W x 3"H x 36 or 72"L
• End Cap: 31"W x 3"H x 12.25"L

Options Availiable

• DC Powered convenience open.
• 14-foot round (3" dia) aluminum arm.
• 14-foot 1 x 3 inch wood arm.
• Arm folding bracket assembly for low headroom (wood arm only).
• Foam padding for arms.
• Fan Kit
• Heater Kit
• Plug-in loop detectors.
• Surge suppressors.

To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS 1610 Traffic Spikes DKS 1610 Traffic Spikes

DoorKing DKS 1610 Traffic Spikes

Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes. Speed bumps force drivers to slow down while driving through the controlled entry point. They are also ideal for keeping vehicular traffic at a safe speed while driving over traffic spikes.

Flush Mount Traffic Spikes

• Individual spring loaded spikes.
• Stainless steel springs.
• Weight spikes (no springs) version available.
• Lock-down version available.
• Flush in-ground unit.
• Painted bright red for easy visibility.
• Ideal to enforce one-way traffic.
• Dimensions: 6.5"H x 12.5"W x 72"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
• Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage

Surface Mount Traffic Spikes

• 3-inch rise provides a built-in speed bump.
• Spikes sections available in 3-foot sections.
• End caps provide a smooth end to the spike section.
• Torsion springs.
• Lock-down standard.
• Surface mount unit.
• 1/4-inch diamond plate painted bright yellow for easy visibility.
• Dimensions: 3"H x 31"W x 36"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
• Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage.

Speed Bumps dsk spike

• Speed bumps are constructed from solid composite material.
• Speed bumps can be easily removed and re-installed.
• Painted bright yellow for easy visibility.
• Designed for installation on concrete surfaces only.
• Dimensions: 2"H x 11.5"W x 72"L.

To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS 1610 Warning Light DKS 1610 Warning Light

DoorKing DKS 1610 Warning Light

Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage. Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes.

Traffic Signal

• Red / green signal operates in sync with operator.
• 8-inch lenses
• 8000 hour / 67 watt traffic bulbs.
• Illuminated with two 67-watt, 8000 hour traffic lamps.
• 115 VAC.
• UL Listed.
• Dimensions: 21"H x 9.75"W x 14"D.
• Designed to be mounted on 1603-215 mounting post (not included).

To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Automatic Barrier Arm Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DKS 1610 Warning Signs DKS 1610 Warning Signs

DoorKing DKS 1610 Warning Sign

• Warning Signs
• Light sensor for automatic operation.
• Built-in flood lamp for spike illumination.
• Keyed on/off override switch.
• Illuminated with two 20-watt fluorescent lamps.
• 150-watt flood lamp for spike illumination.
• 115 VAC.
• ETL Listed.
• Dimensions: 24"H x 24"W x 8"D.
• Designed to be mounted on 3" mounting pipe (not included).

To get on our schedule for your Door King barrier arm gate opener repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Liftmaster Access Control Devices

**** The following is just a list of just some of the Liftmaster access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your Liftmaster access contols repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

LiftMaster CAP2D

LiftMaster CAPCELL

LiftMaster CAPXL

LiftMaster EL1SS

LiftMaster EL2000SS

LiftMaster EL25

LiftMaster ICON26

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster CAP2D 2-Gate Controller (CAP2D)

Connected Access Portal 2-Door Controller cloud-based credentialed access control.

Key Features

• LIFTMASTER CLOUD™ Smart Access Control Software
• Controls up to 2 Gates/Doors Each
• Easily Expandable Network through LiftMaster Cloud

Smart

• Multiple-Entrance Control with LiftMaster Cloud.
• Eliminate Wiring between controllers in multiple-entrance applications with LiftMaster Cloud.
• Universal Compatibility with 26- and 30-bit Wiegand-compatible readers, receivers and RFID readers.
• Expansive Capacity for 25,000 active credentials stored locally so residents can enter even when the internet is down.
• Remote Programming and activity monitoring using LiftMaster Cloud.

Reliable

• Easy to Install in new or existing properties.
• Backed-Up Storage in LiftMaster Cloud ensures that databases are never lost.
• Power over Ethernet (PoE) allows for flexibility of device placement.

Secure

• Email Alerts let you know when a suspended code is used or if an active code is being overused.
• Real-Time Activity Tracking with LiftMaster Cloud.
• Cloud-Based Security keeps data protected and safeguards resident information.

Total Solution Accessories

• CAPXL Connected Access Portal, High Capacity cloud-based access control for residents and guests.
• CAPCELL Cellular 4G/LTE Modem with Wi-Fi® makes it easy to connect CAPXL and CAP2D(s) anywhere.
• PPWR Passport Receiver compatible with all standard Wiegand Protocols.
• PPV3M/PPK3PHM/PPLK1-X Passport Remote Controls Visor and keychain remotes with unique credentialed IDs.
• KPR2000 Wired /Keypad and Proximity Reader single-entry, multifunction controller that supports up to 2,000 users.
• LMMC-MINI /multiCLASS® SE RP10 MINI Mullion proximity reader for credentialed access.
• LMPC2-ST Proxcard II® 1326 /Clamshell Card proximity card for credentialed access.

Capacities

• 2 controlled gates / doors
• 25,000 local resident capacity
• 6,000 local event history (FIFO) offline from host
• Multiple, Holiday and Hold-Open Scheduling, including one-time and repeating exceptions

Power

• 12V DC, Min. 1.5 Amps (transformer not included)
• PoE (802.3af) enabled network devices, 13 Watts max.
• UL® listed

Dimensions

• 4.5" x 3" x 1.25"

Mechanics

• Compact size mounts on standard single electrical-gang box or in a NEMA enclosure
• Led indicator lights communicate status

Communication

• Internet (Dynamic or Static IP)
•    LiftMaster Cloud subscription required
•    High speed
•    DSL with at least 1 MB download speed
•    Cellular (optional CAPCELL)
• Input Ports
•    2 Wiegand inputs
•    2 Request-to-exit (REX) inputs
•    2 Supervised inputs
• Outputs
•    2 Primary relays
•    2 Auxiliary relays

Warranty

• 2 Year Warranty

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster CAPCELL Cellular 4G/LTE Modem (CAPCELL)

Cellular 4G/LTE Modem with Wi-Fi® brings connectivity anywhere.

Key Features

• Plug and play easy setup.
• Use your preferred carrier, compatible with major U.S. and Canadian carriers

Smart

• Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
• Sign up with your preferred carrier or add on to your current plan.
• Avoid trenching and wire pulling for speedy installations.
• Eliminate plain old telephone service (POTS) and improve reliability.

Reliable

• 4G/LTE Connection eliminates the need for hardwired internet.
• Durable, Commercial-Grade Construction withstands extreme temperatures.
• Fan-less Design means no clogged filters and no overheating.

Secure

• Password-Protected Wi-Fi ensures privacy.
• Avoid the Complications of complex networks and firewalls.

Compatibility

• At&t®
• Verizon®
• T-mobile®
• Bell®
• Rogers™
• Telus®

Total Solution Accessories

• CAPXL Connected Access Portal, High Capacity cloud-based access control for residents and guests.
• CAP2D Connected Access Portal, 2-Door Controller cloud-based, credentialed access control.
• 828LM Internet Gateway enables smartphone control for MyQ® products.
• CSW24UL Gate Operator ensures quick and safe access for gated communities and mid- to high-rise buildings. Pair with CAPXL for remote system diagnostics.
• WFAEXT Antenna Mounting Kit for remote antenna mounting and extended cell or Wi-Fi range.
• Elevator Access Control CAPB485 / CAPDC485/ CAPRELAY integrated elevator access and control.

Capacities

• Connect up to 4 wired or multiple Wi-Fi devices

Power

• Input 100–240V AC to 12V DC(transformer included)

Mechanics

• Commercial-grade metal housing
• Primary and backup antennas for cellular and Wi-Fi

Dimensions

• 1.2" x 4.3" x 3.3" (antenna is 6.75")

Communication

• Internet
•    Cellular 4G/LTE with 3G fallback. Also compatible with multiple carriers
• Wi-Fi
•    Supports 64-/128-Bit WEP, WPA and WPA2
•    Wireless N Speeds (up to 300 MB/s) 2.4 GHz
•    Ability to set static IP addresses
• Ports
•    4 RJ45 LANs
•    1 RJ45 WAN
•    1 SIM Card Slot
•    2 Cellular SMA Antennas
•    2 Wi-Fi SMA Antennas
•    USB

Operating Temperature

• -22°F - 158°F (-30°C - 70°C)

Warranty

• 2 Year

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster CAPXL Connected Access Portal (CAPXL)

Connected Access Portal High Capacity Cloud-based access control for residential communities.

Key Features

• LiftMaster Cloud™ Smart Access Control Software
• Color Touch Display 10”, 720p High-Def Interface
• Plug and Play Easy Setup and Programming

Smart

• Intuitive Interface with color touch display for superior resident and guest usability.
• Customizable Background on a 10", full-color, 720p high-definition screen.
• Remote Programming and activity monitoring using Liftmaster Cloud.
• Configurable Email Notifications know when codes are overused or if service is needed for the CAPXL, CAP2D or Gate Operator.
• Eliminate Trenching with Wi-Fi® and wireless link to Liftmaster® Gate Operators.

Reliable

• Voice Over IP (VoIP) provides crystal-clear call quality with no long-distance charges.
• Stainless Steel for a modern, durable design.
• Local System Memory allows residents to enter even when the internet is down.

Secure

• Get Alerted when a suspended code is used or if an active code is being overused.
• Real-Time Activity Tracking with Liftmaster Cloud.
• Cloud-Based Security keeps data protected and safeguards resident information.

Total Solution Accessories

• CAP2D Connected Access Portal, 2-Door Controller cloud-based, credentialed access control.
• CAPCELL Cellular 4G/LTE Modem with Wi-Fi makes it easy to connect CAPXL and CAP2D(s) anywhere.
• CAPXLTK Trim Kit and Back Kit conceal openings left from other systems in flush-mount, Infinity L and Icon installations.
• Passport Remote Controls PPV3M / PPK3PHM / PPLK1-X visor and keychain remotes with unique credentialed IDs.
• LMMC-MINI multiCLASS® SE RP10 Mini Mullion proximity reader for credentialed access.
• LMPC2-ST PROXCARD II® 1326 Clamshell Card Proximity card for credentialed access.
• CAP485 Elevator Access Control CAPB485 / CAPDC485 / CAPRELAY Integrated elevator access and control.
• 86LM/WFAEXT Antenna Mounting Kit For extended range or remote mounting for radios or Wi-Fi.
• Gate Operators CSW24UL / CSL24UL / HCTDCUL Ensure quick and safe access for residential communities. Pair with CAPXL for remote system diagnostics.

Capacities

• 4 Controlled Gates/Doors
• Wireless Link for up to 8 LiftMaster® Operators
• 4 to 8 Digit Entry Codes
• 4 to 6 Digit Directory Codes
• 50,000 Local Resident Capacity
• 50,000 Local Event History
• Multiple, Holiday and Hold-Open Scheduling, including one-time and repeating exceptions

Power

• Input 120V AC (Transformer Included)
• UL® Listed
• Relay Outputs 3 Amps

Dimensions

• CAPXL: 18" x 14" x 4.5"
• CAPXLTK (Outer Trim): 23.75" x 19.375"

Mechanics

• 10", 720p High-definition touch display
• Fade-and glare-resistant display
• Outdoor stainless-steel housing
• Built-in Security+ 2.0® radio
• Postal lock provision
• Surface, flush (CAPXLTK) or pedestal (PED42, PED64) mount
• Camera ready; use any standard pinhole camera

Standard Specs

• Communication Internet (Dynamic or Static IP)
• LiftMaster Cloud subscription required
• Wi-Fi®
• High speed DSL with at least 1MB download speed
• Cellular (optional CAPCELL)

Voice

• VoIP (Voice over IP)
• Phone.com® Service Required for VoIP

Onboard Radio

• Security+ 2.0 for Passport Remote Controls
• Wireless link to UL 325 Gate Operators manufactured after October 2017
• Retrofit Kits will be available for operators manufactured between January 2016 and October 2017
• HomeLink® IV and V Compatible*

* Requires HOA or Management Assistance

Warranty

• 2-Year

Input Ports

• 4 Wiegand Inputs
• 4 Request to-Exit (REX) Inputs
• 4 Supervised inputs
• 1 Auto-Call input (Requires LPEXP)

Outputs

• 4 Primary relays
• 4 Auxiliary relays
• 1 Wiegand output

Operating Temperature

• -20°F - 130°F (-29°C - 51°C)

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster EL1SS Telephone Entry Systems (EL1SS)

The LiftMaster® EL1SS Telephone Intercom and Access Control System provides wired telephone intercom communication and secure access control at the gate or door. It is easy to install, and its rugged stainless steel housing provides reliable, durable performance year after year, all at an exceptional value. With the EL1SS, residents or small businesses can simply communicate with visitors, grant or deny access, all from the convenience of their phone.

Performance

• Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
• Easy-to-install design saves an average of 10 minutes on installation time over older models.
• Simple design makes it ideal for residents and visitors to communicate and grant or deny access.
• Stainless steel faceplate with black powder coated housing is attractive and tough.
• 200 (4-digit) unique, programmable entry codes provide convenient assigned access

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster EL2000SS Telephone Entry System (EL2000SS)

The EL2000SS is a high-capacity telephone entry access control system designed to complement virtually any gated community. It is flexible enough to be used in apartment buildings, condo complexes, office parks and commercial sites. It features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line, making it a great choice for multi-tenant installations.

The EL2000SS utilizes our new Versa XS 4.0 menu-driven software configuration and database management tool with a simple user interface designed with you in mind. It includes FREE cloud storage for reliable data sharing and backup.

Available in a stainless steel housing.

Performance

• Entry Codes allow for 2,000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes, 1000 card codes, 500 entry codes for example.
• Call Waiting allows the resident to answer a call from the gate or door while on another call.
• Recessed, Lighted, ADA-Compliant Keypad makes entering your PIN easy and convenient.
• Transaction Monitoring stores a maximum of 8,000 transactions including date, time, identification and transaction type.
• Remote Updates enables system updates and upgrades to be made via a modem connection.
• Wiegand inputs Up to 4 Wiegand inputs, with 2 (optional) plug-in modules (WOMODKT).
• Programmable Relays provide four assignable built-in relays.
• Activity Reporting gives property managers the ability to print database, system and history reports.
• Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
• Versa XS is our menu driven software configuration and database management tool for EL2000 Telephone Entry Systems. To learn more about Versa XS click here.

Safety and Security

• Auto Sensor input automatically dials the residence or can activate relays.
• Anti-Passback prevents pass back of cards and codes for a pre-programmed amount of time to eliminate tailgating.
• Security Lockout prevents access for a pre-programmed amount of time when too many invalid code attempts are made.
• Postal Lock provision supports a switch kit that integrates with U.S. Postal Service lock so only a postal carrier can enter.
• Unlock Schedule for a gate or door allows you to configure entry points to automatically open or lock at set periods of time.
• Holiday Programming provides up to 16 days that can be defined to override the standard lock/unlock schedules.
• Time Zone Feature allows for up to 62 programmable time zones with three segments each.

Specifications

• Power - 120 VAC to 16 VDC transformer (included)
• Shipping Weight - 20 lbs.
• Dimensions - EL2000SS: 16 in. H x 11.25 in. L x 3.25 in. D
• Model Numbers - EL2000SS - LCD unit, stainless steel housing

Additional Features

• VERSA SOFTWARE - Versa XS is a Microsoft Windows® based software application that allows you to use almost any Windows personal computer to conveniently and securely configure, manage and update access control records. Download the latest version of Versa.
• UNIVERSAL BOARD - The EL25 and EL2000SS share the same main processing board, which makes it much easier to master the installation and service both systems.
• REMOTE ACCESS DIAGNOSTICS - The EL2000SS will retain unit alarms within the system event buffer. For added security, the unit will record the following alarms: forced door/gate and ajar door/gate. The EL2000SS also records unit over voltage and under voltage alarms, allowing for simplified troubleshooting of the system.
• E-Z SCAN - Cards and Passport remote controls can be programmed into the EL2000SS simply by using the optional card reader or radio receiver installed into one of the plug-in modules. Is compatible with the PPWR and Passport remote controls. VOICE PROMPTS - Guides installers through system setup at the unit's main keypad and provides assistance to end users with the push of a button. (ADA application)
• WARRANTY - 2 Years.

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster EL25 Telephone Entry System (EL25)

Residential and Commercial Telephone Entry System with Expanded Capacity and Enhanced Versatility The EL25 is beautifully engineered for private residences, yet fully adaptable for use in apartment buildings, condo complexes, office parks and commercial sites. The EL25 utilizes our new Versa XS 4.0 menu-driven software configuration and database management tool with a simple user interface designed with you in mind. It includes FREE cloud storage for reliable data sharing and backup.

Available in grey, nickel or silver housing which can be landscape or portrait mounted.

Performance

• Entry Codes allow for 2,000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes, 1000 card codes, 500 entry codes for example.
• Call Waiting allows the resident to answer a call from the gate or door while on another call.
• Recessed, Lighted, ADA-Compliant Keypad makes entering your PIN easy and convenient.
• Transaction Monitoring stores a maximum of 8,000 transactions including date, time, identification and transaction type.
• Remote Updates enables system updates and upgrades to be made via a modem connection.
• Wiegand Inputs Up to 4 Wiegand inputs, with 2 (optional) plug-in modules (WOMODKT).
• Programmable Relays provide four assignable built-in relays.
• Activity Reporting gives property managers the ability to print database, system and history reports.
• Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
• Versa XS is our menu driven software configuration and database management tool for EL25 Telephone Entry Systems. To learn more about Versa XS click here.

Safety and Security

• Auto Sensor input automatically dials the residence or can activate relays.
• Anti-Passback prevents pass back of cards and codes for a pre-programmed amount of time to eliminate tailgating.
• Security Lockout prevents access for a pre-programmed amount of time when too many invalid code attempts are made.
• Postal Lock provision supports a switch kit that integrates with U.S. Postal Service lock so only a postal carrier can enter.
• Unlock Schedule for a gate or door allows you to configure entry points to automatically open or lock at set periods of time.
• Holiday Programming provides up to 16 days that can be defined to override the standard lock/unlock schedules.
• Time Zone Feature allows for up to 62 programmable time zones with three segments each.

Specifications

• Power - 120 VAC to 16 VDC transformer (included)
• Shipping Weight - 11 lbs.
• Dimensions - 6 in. H x 10.25 in. L x 4 in. D
• Model Numbers - EL25G - grey, EL25N - nickel, EL25S - silver

Additional Features

• Versa Software - Versa XS is a Microsoft Windows® based software application that allows you to use almost any Windows personal computer to conveniently and securely configure, manage and update access control records. Download the latest version of Versa. See Software Download.
• Universal Board - The EL25 and EL2000SS share the same main processing board, which makes it much easier to master the installation and service both systems.
• Remote Access Diagnostics - The EL25 will retain unit alarms within the system event buffer. For added security, the unit will record the following alarms: forced door/gate and ajar door/gate. The EL25 also records unit over voltage and under voltage alarms, allowing for simplified troubleshooting of the system.
• E-Z Scan - Cards and Passport remote controls can be programmed into the EL25 simply by using the optional card reader or radio receiver installed into one of the plug-in modules. Is compatible with the PPWR and Passport remote controls. Voice Prompts - Guides installers through system setup at the unit's main keypad and provides assistance to end users with the push of a button. (ADA application)
• Warranty - 2 Years.

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

LiftMaster Advanced Multi-Tenant Access Control (ICON26)

LiftMaster ICON 26 Advanced Multi-Tenant Access Control System

• High-resolution, 10", 26-name, large LCD
• Two slots for memory cards
• High-quality digital communication system
• History buffer of up to 8,000 transactions
• 60 programmable utility keycodes per system
• Field upgradable memory capacity
• Programmable "unlisted resident" feature
• 6-digit resident keycode access
• 3-digit resident dialing
• System mutes speaker during dialing
• Touch-tone and rotary dial detection
• User-friendly local programming via built-in keyboard
• Two independent 7-day timers per relay output
• Postal lock ready
• "Exit Switch" ready

To get on our schedule for your Liftmaster gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear Access Control Devices

**** The following is just a list of just some of the Linear access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your Linear access contols repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

Linear AM3Plus

Linear AE-100

Linear RE-2

Linear RE-1

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear AM3Plus 4-Portal Access Controller (AM3Plus)

Linear AM3Plus 4-Portal Access Controller

The Model AM3Plus 4-Portal Access Controller is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

Housed in a lockable, plastic enclosure, the AM3Plus features a 2-digit LED display, nine status indicators, four relay indicators with four relay activation pushbuttons. Three programming buttons, a reset button, and a power indicator are present. The enclosure is monitored with a magnetic tamper switch.

The system controls its four output relays by responding to various input devices that react to proximity cards, transmitters, and entry codes. The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

Access is granted or denied depending on the current user's authorization to gain access and system settings that control groups of users or all users. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

For easy programming, the AM3Plus contains Linear's built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AM3Plus is also compatible with Linear's powerful AccessBase2000 dedicated access control PC software.

The AM3Plus is network ready. AM3Plus units can be interconnected with Linear's AE1000Plus and AE2000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AM3Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.

Two sets of Wiegand inputs are available for connection to 26, 30, or 31-bit Wiegand devices (card readers, etc.). Two sets of PBUS inputs are available for connection to Linear's line of remote accessories.

Capabilities with AccessBase2000 Programming

• Programming through dedicated PC
• Up to 10,000 cardholders grouped in sets
• Up to 24 card blocks with up to 1,900 cards each (45,600 total)
• Up to 20,000 individually enrolled cards
• Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total) †
• Up to 20,000 individually enrolled transmitters †
• Up to 20,000 entry codes for cardholders
• Up to 20,000 telephone directory codes for cardholders
• 20,000 event log entries per unit
• Up to 31 access time zones
• Up to six PBUS and two Wiegand devices per unit

Capabilities with AXNET Programming

• Programming using ANY PC through browser software
• Up to 2,000 cardholders
• Up to 24 card blocks with up to 1,600 cards each (38,400 total)
• Up to 2,000 individually enrolled cards
• Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total) †
• Up to 2,000 individually enrolled transmitters †
• Up to 2,000 key codes
• Up to 2,000 telephone directory codes
• 2,500 event log entries per unit
• Up to 8 access time zones
• Up to four PBUS and two Wiegand devices per unit
• † (AM-RRR remote receiver required)

Features

• Full control of 4 doors; each supporting request to exit and door status monitoring
• 2 Wiegand inputs for readers
• Add AM-CRI's for more Wiegand inputs
• Local or remote programming using a PC and AccessBase2000 or through browser with built-in AXNET software
• Remote programming using optional ACM-1 modem (ACP00905)
• Relay auto lock/unlock schedules
• 11.5" W x 12.5" H x 4" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear Commercial Telephone Entry System One Door (AE-100)

Linear AE-100 Commercial Telephone Entry System - One Door

The Model AE-100 Commercial Telephone Entry System - One Door is designed for use as a primary access control device for apartments, condominiums, and offices with up to 125 residents.

The system can be used in a lobby or outside. Surface, recessed, and pedestal mounting options are supported. The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access.

Housed in a locked, rugged stainless steel faced enclosure, the AE-100 features a lighted 12-key telephone style keypad and four operation buttons all with bright, easy-to-see graphics. The backlit two-line directory LCD display scrolls a programmable welcome message and shows the directory Names and Directory Codes.

The system contains a built-in microphone, tamper resistant speaker, and a TTY connector for the hearing impaired. The heavy duty access relay can control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

Multi-lingual display programming prompts and voice help is available with a choice of English, Spanish, French-Canadian, or Portuguese language selection for the system. The system can be programmed locally using the keypad, or remotely with a touch tone telephone.

Up to four AE-100 units can be connected to the same dedicated telephone line to form a simple network. Connecting multiple units allows transferring programming data (either the directory entries only or the entire memory's contents) from the "master" unit to the other sub-units.

Optional features that the AE-100 supports are provisions for postal lock and color CCTV camera installation (Model CCM-1A).

The AE-100 is powered from a 16 VAC plug-in transformer and supports an internal rechargeable 1.2 amp/hour backup battery (not included). The battery charging circuit will support an external backup battery with up to 7 amp/hour capacity.

Applications 

Features

• Many installation choices: surface, recessed, gooseneck
• Stainless steel front panel
• Telephone style keypad with lighting
• Accepts a total of 125 directory listings or stand-alone entry codes
• TTY jack for connection to text communication devices for the hearing impaired
• Simple network capability with up to four units - allows transferring programming data from "master" unit to other sub-units
• Two-line-16-character LCD display
• Removable terminal blocks
• Form "C" access relay rated at 10 amps AC and 7 amps DC @ 30 volts
• Load shed circuitry protects backup battery
• 9.75" W x 11.75" H x 3.5" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear RE-2 Residential Telephone Entry System (RE-2)

Linear RE-2 Residential Telephone Entry System

The Model RE-2N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional color video camera are housed in a rugged enclosure that can be mounted to a pedestal, bolted directly to a wall, or mounted recessed in a wall with the optional trim ring. The die-cast keypad keys have bright, easy-to-read graphics and are lit with overhead lights. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

Operation

Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-2N will acquire the residence's local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-2N by pressing a key on the telephone's keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitor's call.

Call Waiting:

If the resident is using the telephone at the time a visitor calls, the RE-2N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

Call Forwarding:

Programmable call forwarding allows the RE-2N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-2N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

Alternate Numbers:

For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

Local Control:

The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

Access Methods:

Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linear's Model AM-KP keypad can be used as a secondary remote keypad for the RE-2N.

Up to 24 sets of block coded MegaCode® transmitters (up to 100 transmitters total) can be used to gain access through the RE-2N's built-in radio receiver. Each transmitter can be individually suspended or re-activated. One facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-2N.

System Features

Time Zones:

The RE-2N contains an internal clock and calendar. Seven Programmable "time zones" allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the "Do Not Disturb" feature can each be set to only be active during a specific time zone period. Up to ten "holiday" days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

Portal Supervision:

The SENSE/INHIBIT input can be used two ways. If programmed for "door sense", a switch on the door detects forced entry or door ajar situations. If programmed for "inhibit", the input can be wired to a "service" switch or automatic timer that will disable the Relay #1 when required.

Hardwired Activation:

The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-2N case to allow keyed entry for authorized personnel.

Access Security:

The "anti-passback" feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The "keypad lockout" feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

Event Log:

An access log of up to 450 events is stored in the unit's memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-2N's built-in modem.

Local & Remote Programming:

The system's built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The software's graphic display of each of the programming step makes programming easy. Without a computer, the RE-2N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.

Obstacle Detection:

Linear's Model MGT safety edge transmitter is compatible with the RE-2N. This MGT detects and transmits obstacle events to the RE-2N receiver. Obstacle signals from an MGT transmitter will activate Relay #2.

Alarm Interface:

Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.

Voice Synthesizer:

A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

Features

• Powder coated nickel or stainless steel finish
• Downlighting
• User friendly voice prompts
• Two programmable outputs control two openings
• Obstacle reverse, alarm shunt
• Provisions for Knox Box
• Simple to program and maintain through on board keypad, touchtone telephone, or computer with modem
• 450 event memory log
• Supports 100 entry codes; 100 block-coded transmitters
• Built-in 318 MHz superheterodyne radio receiver
• Backup battery ready
• 10" W x 6.25" H x 4" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

Linear RE-1 Residential Telephone Entry System (RE-1)

Linear RE-1 Residential Telephone Entry System

The Model RE-1N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional video camera are housed in a rugged enclosure that can be mounted to a pedestal or bolted directly to a wall. The diecast keypad keys have bright, easy-to-read graphics and are lit with an overhead light. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

Operation

Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-1N will acquire the residence's local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-1N by pressing a key on the telephone's keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitor's call.

Call waiting:

If the resident is using the telephone at the time a visitor calls, the RE-1N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

Call Forwarding:

Programmable call forwarding allows the RE-1N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-1N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

Alternate Numbers:

For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

Local Control:

The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

Access Methods:

Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linear’s Model AM-KP keypad can be used as a secondary remote keypad for the RE-1N.

Up to 24 sets of block coded MegaCode® transmitters (up to 100 transmitters total) can be used to gain access through the RE-1N's built-in radio receiver. Each transmitter can be individually suspended or re-activated. Four facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-1N.

System Features

Time Zones:

The RE-1N contains an internal clock and calendar. Seven programmable time zones allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the Do Not Disturb feature can each be set to only be active during a specific time zone period. Up to ten holiday days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

Portal Supervision:

The SENSE/INHIBIT input can be used two ways. If programmed for door sense, a switch on the door detects forced entry or door ajar situations. If programmed for inhibit, the input can be wired to a service switch or automatic timer that will disable the Relay #1 when required.

Hardwired Activation:

The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-1 case to allow keyed entry for authorized personnel.

Access Security:

The anti-passback feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The keypad lockout feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

Event Log:

An access log of up to 450 events is stored in the unit's memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-1N's built-in modem.

Local & Remote Programming:

The system's built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The software's graphic display of each of the programming step makes programming easy. Without a computer, the RE-1N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.

Obstacle Detection:

Linear's Model MGT safety edge transmitter is compatible with the RE-1N. This MGT detects and transmits obstacle events to the RE-1N receiver. Obstacle signals from an MGT transmitter will activate Relay #2.

Alarm Interface:

Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.

Voice Synthesizer:

A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

Features

• Cast housing stainless steel finish (RE-1SS) or nickel finish (RE-1N)
• Downlighting
• User friendly voice prompts
• Two programmable outputs control two openings
• Obstacle reverse, alarm shunt
• Provisions for Knox Box
• Simple to program and maintain through on board keypad, touchtone telephone, or computer with modem
• 450 event memory log
• Supports 100 entry codes; 100 block-coded transmitters
• Built-in 318 MHz superheterodyne radio receiver
• Backup battery ready
• 6.45" W x 10.81" H x 3.74" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing Access Control Devices

**** The following is just a list of just some of the DoorKing access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your DoorKing access contols repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day. ******

DoorKing DKS812AP

DoorKing DKS1812C

DoorKing DKS1812P

DoorKing DKS1833

DoorKing DKS1834

DoorKing DKS1835

DoorKing DKS1837

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing 1812 Access Plus DKS1812AP

DoorKing 1812 Access Plus

The 1812 Access Plus is PC Programmable and IP Addressible. Each Access Plus Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. With the easy to use Access Plus Account Manager programming software, you can customize the system immediately. The 1812 Access Plus controls a main door or gate and can easily be expanded to control up to six additional access points. The 1812 Access Plus features an upgraded processor, a new high fidelity digital voice circuit, better volume control, a lighted push-button and additional call out telephone numbers (up to 27). Discerning homeowners will appreciate the additional programming, reporting and advanced features found in the 1812 Access Plus system.

DoorKing's Access Plus Account Manager Software is a powerful, flexible and easy to use computer program that allows you to manage access control in a variety of controlled access applications.

To get on our schedule for your Door King gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing 1812 Classic DKS1812C

DoorKing 1812 Classic

Single Family Intercom System.

The model 1812 is a unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessity to pay for an additional telephone line at their home. With its "intercom mode" programming feature, the 1812 can also be connected to a PBX or KSU type system, making it ideal for small businesses to control access through a single door or gate. Visitors are easily identified by voice communication and can be granted or denied access directly from a touch-tone telephone. The 1812 is available in surface, wall and flush mount designs.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing DoorKing 1812 Plus DKS1812P

DoorKing 1812 Plus

Homeowners / Small Apartment / Condo

The 1812 Plus is an updated version of the 1812 Classic and features an upgraded processor, a new high fidelity digital voice circuit, better volume control, a lighted push-button and additional call out telephone numbers (up to 27). This unique communication and access control system allows homeowners to use their existing telephone as an intercom to speak with a guest at a door or gate and is ideal for those applications requiring a basic, single door or gate, access control solution.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing 1833 DKS1833

DoorKing 1833

The Model 1833 is an ideal telephone entry and access control system that is suited for applications that do not require a directory or in applications where a separate directory exists.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1833 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1833 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing 1834 DKS1834

DoorKing 1834

The Model 1834 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button and big A and Z scroll buttons makes this system one of the easiest to use on the market today! For additional security, the 1834 allows you to monitor activity AS IT HAPPENS on your computer display.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing 1835 DKS1835

DoorKing 1835

The Model 1835 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1835 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1835 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

The 1835 is available in three distinct styles: Surface mount, Flush mount and Wall mount. Contact your professional DKS system installer for more information about this and other DKS products.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Irving Texas

972-814-0489 / 214-366-4455

DoorKing 1837 DKS 1837

DoorKing 1837

The Model 1837 is an ideal telephone entry and access control system suited for medium to large apartment and gated community applications as well as office buildings and industrial sites.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The eight-line LCD display features big 1/2-inch characters for easy viewing and your personalized message appears on the screen when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1837 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1837 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

The 1837 is available in three distinct styles: Surface mount, Flush mount and Wall mount. Contact your professional DKS system installer for more information about this and other DKS products.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 972-814-0489 and we can usually be out same day or next day.