Liftmaster Sliding Gate Opener Repair

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster Sliding Gate Opener Repair

    We have been a Liftmaster sliding gate opener repair service company here in and around Keller Texas for over 20 years. Note: Most Liftmaster sliding gate openers are AC powered, but some do have backup batteries to run the sliding gate opener for a short while when the AC power is out, however it is sometimes possible to get away with runing a Liftmaster sliding gate opener on a solar powered system with larger batteries and higher wattage solar panels. When you need residential Liftmaster sliding gate opener repair, or Liftmaster commercial sliding gate opener repair we are the company with experienced Liftmaster sliding gate opener repair technicians that come out with the intent of actually repairing your existing sliding gate opener. Most other companies are mainly new installation companies (some only do certain types of swing gate openers) and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new sliding gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our Liftmaster sliding gate opener repair techs are experienced and skilled at repairing all types of Liftmaster sliding gate openers, even the ones that others say that nobody works on. When we come out to do Liftmaster sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new sliding gate opener installs as well if that is what you want, but we do sliding gate opener repair on existing sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many models we do Liftmaster sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster Automatic Sliding Gate Opener Repair

    We have been a Liftmaster automatic sliding gate opener repair service company here in and around Keller Texas for over 20 years. Note: Most automatic sliding gate openers are electric sliding gate openers and the two terms can be used interchangably, however there are some rare automatic sliding gate openers that are not electic such as some on cattle ranches that move when a truck drives onto a large pressure plate that automatically moves a gate without electricity. Whether you need residential Liftmaster automatic sliding gate opener repair, or commercial Liftmaster automatic sliding gate opener repair we are the company with experienced Liftmaster automatic sliding gate opener repair technicians that come out with the intent of actually repairing your existing Liftmaster automatic sliding gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our Liftmaster automatic sliding gate opener repair techs are experienced and skilled at repairing all types of Liftmaster automatic sliding gate openers, even the ones that others say that nobody works on. When we come out to do Liftmaster automatic sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic gate opener installs as well if that is what you want, but we do Liftmaster automatic sliding gate opener repair on existing Liftmaster automatic sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many models we do Liftmaster automatic sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your Liftmaster automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster Electric Sliding Gate Opener Repair

    We have been a Liftmaster electric sliding gate opener repair service company here in and around Keller Texas for over 20 years. Note: All Liftmaster electric sliding gate openers are automatic gate openers and the two terms can be used interchangably whether you are talking about Liftmaster electric sliding gate openers that are AC powered or solar powered Liftmaster sliding gate openers. Whether you need residential Liftmaster electric sliding sliding gate opener repair, or commercial Liftmaster electric sliding gate opener repair we are the company with experienced Liftmaster electric sliding gate opener repair technicians that come out with the intent of actually repairing your existing Liftmaster electric sliding gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new electric gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our Liftmaster electric sliding gate opener repair techs are experienced and skilled at repairing all types of Liftmaster electric sliding gate openers, even the ones that others say that nobody works on. When we come out to do Liftmaster electric sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new electric gate opener installs as well if that is what you want, but we do Liftmaster electric sliding gate opener repair on existing Liftmaster electric sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many models we do Liftmaster electric sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your Liftmaster electric sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster Driveway Sliding Gate Opener Repair

    We have been a Liftmaster driveway sliding gate opener repair service company here in and around Keller Texas for over 20 years. Note: All electric Liftmaster driveway sliding gate openers are automatic Liftmaster driveway sliding gate openers and the two terms can be used interchangably whether you are talking about electric Liftmaster driveway sliding gate openers that are AC powered or solar powered Liftmaster driveway sliding gate openers. Most Liftmaster driveway sliding gate openers work single sliding driveway gates, but there are some rare double sliding driveway gates for extreamly wide driveways. Whether you need residential Liftmaster driveway sliding gate opener repair, or commercial Liftmaster driveway sliding gate opener repair we are the company with experienced Liftmaster driveway sliding gate opener repair technicians that come out with the intent of actually repairing your existing Liftmaster driveway sliding gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new driveway gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our Liftmaster driveway sliding gate opener repair techs are experienced and skilled at repairing all types of Liftmaster driveway sliding gate openers, even the ones that others say that nobody works on. When we come out to do Liftmaster driveway sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new driveway gate opener installs as well if that is what you want, but we do Liftmaster driveway sliding gate opener repair on existing Liftmaster driveway sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For some examples and information on the many models we do Liftmaster driveway sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your Liftmaster driveway sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster Sliding Gate Openers:

**** The following is just a list of just some of the Liftmaster sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

Liftmaster RSL12UL

Liftmaster CSL24UL

Liftmaster SL3000UL

Liftmaster SL585UL

Liftmaster SL595UL

Liftmaster RSL12U

Liftmaster CSL24U

Liftmaster SL3000U

Liftmaster SL585U

Liftmaster SL595U

Liftmaster SL575

Liftmaster SL585

Liftmaster SL595

***********

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster RSL12UL 12VDC Slide Gate Operator (RSL12UL 12VDC)

LiftMaster RSL12UL Slide Gate Operator

RSL12UL features battery backup that provides up to 114 cycles or 63 days of standby power.

Reliable

• Solar-Ready, Ultra-Reliable System delivers power when and where you need it.
• Battery Backup provides seamless access by providing standby power when the power is down.
• Smooth Start/Stop Operation and mid-travel reversal extend operator hardware life.
• Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Warranty 3 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Posilock® prevents gate from an unauthorized manual open.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Manual Disconnect when unlocked allows gate to be opened manually.
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile Resistive Edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Power

• 115VAC
• Solar-Ready, Ultra-reliable System delivers power when and where you need it
• Accessory Power: 12VDC 500mA output

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: 1-piece UV-resistant polyethylene cover
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 100 Lbs.

Dimensions

• Height: 23.30”
• Width: 16.24”
• Depth: 16.76”

Temperature Specifications

• Without Heater: -4°F (-20°C) to 140°F (60°C)
• With Optional Heater: (HTR) -40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 10” per second

Standard Features

• Synchronized Close simultaneously closes gates
• Quick Close and Anti-Tailgate Quickly secure property, preventing unauthorized access (requires expansion board)
• Inherent Reversing Sensor Detects obstructions and reverses gate when closing or stops/reverses
• Monitored Safety Inputs 3 main board, 3 optional expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

RECOMMENDED CAPACITIES

• Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster CSL24UL Slide Gate Operator (CSL24UL)

LiftMaster CSL24UL Slide Gate Operator

CSL24UL features a battery backup that provides up to 208 cycles or 24 days of standby power.

Reliable

• Battery Backup provides seamless access by providing standby power when the power is down.
• Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Smooth start/stop operation and mid-travel reversal extend operator hardware life.
• Warranty 5 years commercial, 7 years residential.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Quick Close and Anti-Tailgate quickly secures the property, preventing unauthorized access.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Manual Disconnect when unlocked allows gate to be opened manually.
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories

• LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• 24VDC Continuous duty
• Operator Duty Rating: high-cycle, high-temperature continuous duty
• Wormgear Reduction: Commercial oil-bath gearbox provides 10:1 Wormgear reduction
• Chain: #41 Black Oxide (30ft. Supplied)

Power

• 120/230V single-phase
• Optional Kit (3PHCONV) to convert an input voltage of 208/230/460/575VAC to an output voltage of 120VAC
• Solar-Ready Ultra-Reliable System delivers power when and where you need it
• Accessory Power: 24VDC 500mA output; switched and un-switched power

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: high-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance
• UL® Usage Classification: I, II, III, and IV
• Operator Weight: 140 lbs.

Dimensions

• Height: 25.07”
• Width: 15.55”
• Depth: 19.51”

Temperature Specifications When Cold:

• Without heater: -4°F (-20°C)
• With heater: (HTR) -40°F (-40°C)

Temperature Specifications When Hot:

• Without heater: 140°F (60°C)
• With heater: (HTR) 140°F (60°C)

Gate Speed

• 12” per second

Standard Features:

• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses gate when opening
• Posilock® automatically closes the gate when it is pushed from the closed limit
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL3000UL Slide Gate Operator (SL3000UL)

LiftMaster SL3000UL Slide Gate Operator

AC High - Traffic Commercial Slide Gate Operator

CONTINUOUS-DUTY, High-Temperature Motor

The SL3000UL models of slide gate operators are the first choice for heavy-traffic applications and high-demand customers, including large development and management companies, prestigious residential gated communities, and custom home builders.

Featuring the highest quality components and backed by years of proven reliability, each unit is carefully inspected and mechanically tested to provide unsurpassed performance. Unique engineering innovations ensure than any SL3000UL™ model will meet the needs of almost every type of high-traffic gated entrance. All backed by the safety and reliability of the most advanced control board in the industry.

Reliable

• Legacy elite heavy-duty commercial gear-driven transmission provides unsurpassed reliability.
• Limit switch design provides precision limit accuracy and reliability.
• Surge suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 5 years commercial, 7 years residential.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless dual-gate communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® Safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Inherent reversing sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
• Pre-motion warning alarm activates on-board alarm 3 seconds prior to gate motion.
• Manual disconnect when unlocked allows gate to be operated manually.
• Quick close and anti-tailgate quickly secure property, preventing unauthorized access.
• UL® Listed Gate operators with monitored safety entrapment protection devices.

Mechanics

• Continuous-Duty Motor with Class H Insulation is rated for high-cycle, high-temperature applications (available in 1/2 and 1 HP)
• Operator Duty Rating: Continuous Duty
• Wormgear Reduction: Commercial oil-bath gearbox providing 30:1 Wormgear Reduction
• Chain: #41 Black Oxide (25ft. Supplied)

Power

• 115V Single-Phase
• Accessory Power: 24VDC 500mA output
• 2 Auxiliary Outlets
• Optional Kit (3PHCONV) to convert an input voltage of 208/240/480/575VAC to an output Voltage of 115VAC

Commercial-Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: High-Density, UV-Resistant , 1-Piece Polyethylene plastic for excellent heat and corrosion resistance
• UL® Usage Classification: I, II, III and IV
• Operator weight: 140 lbs.

Dimensions

• Height: 26.51”
• Width: 18.14”
• Depth: 20.39”

Gate Capacities

• 1/2 HP Motor - Gates up to 50ft long or 1000 lbs
• 1 HP Motor - Gates up to 50 ft or 2000 lbs

Temperature Specifications

• Without heater: -4°F (-20°C ) to 140°F (60°C
• With optional heater: (HTRNB) -40°F (-40°C ) to 140°F (60°C)

Gate Travel Speed

• 12” per second

Standard Features

• External Alarm Reset Button instantly resets the built in safety alarm siren
• Mechanical Limit System maintains accurate gate position throughout gate travel, even after using manual disconnect
• Monitored Safety Inputs 3 main board, 3 expansion boards
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

The SL3000UL gate operator is available in the following models:

  *SL3000UL: standard model
   *SL3000ULDC: equipped with battery backup
   *SL3000ULDM: dual motor for heavier traffic and higher temperatures
   *SL3000ULE: capable of manual backdrive for emergency access
   *SL3000UL1HP: heavy-duty, 1 horsepower model for heavier gates

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL585UL AC Slide Gate Operator (SL585UL AC)

LiftMaster SL585UL AC Slide Gate Operator

SL585UL features a heavy- duty industrial lockable metal cover.

Reliable

• Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 2 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Universal Footprint simplifies retrofit applications by adapting to preexisting pads.
• Homelink® Compatible (version 4.0 and higher).

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Manual Disconnect when unlocked allows gate to be operated manually.
• Quick Close and Anti-tailgate quickly secure property, preventing unauthorized access.
• Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
• Automatic Solenoid Brake prevents the gate from being back driven.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• High-Starting Torque continuous-duty motor (available in 1/2, 1 and 1 1/2 HP)
• Operator Duty Rating: 20 cycles per hour
• Wormgear Reduction: 20:1 Wormgear Reducer
• Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
• Chain: #50 nickel-plated (25ft. supplied)

Power

• 115/208/230VAC Single-Phase or 208/230/460/575vac 3-phase (575v includes factory-installed heater) (Specify when ordering)
• Accessory Power: 24VDC 500mA Max.
• Dual -Voltage Connections: increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.

Commercial-Grade Design

• Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments
• Cover /Frame: weather-resistant, lockable, 16-gauge steel ; 7-gauge pre-galvanized steel frame
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 240 lbs.

Dimensions

• Height: 38.02”
• Width: 30.63”
• Depth: 17.30”

Recommended Capacities by Motor Size:

• 1/2 HP - 1000 Lbs Max, 45 Ft Max Width for Overhead or V-Groove Gates, 25 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 HP - 1600 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 1/2 HP - 1900 Lbs Max, 75 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 20 Cycles/Hr.

Temperature Specifications

• Without heater: -4°F (-20°C) to 140°F (60°C)
• With optional heater: (HTRNB—HTR460 for 460V operators) 40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 11” per second

Standard Features

• External Alarm Reset Button: instantly resets the built-in safety alarm siren
• Mechanical Limit System: maintains accurate gate position throughout gate travel, even after using manual disconnect
• Monitored Safety Inputs: 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver: Tri-Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display: simplifies installation and troubleshooting
• Programmable Auxiliary Relays: make adding additional features easy
• Homelink® Compatible: version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL595UL AC Slide Gate Operator (SL595UL AC)

LiftMaster SL595UL AC Slide Gate Operator

SL595UL features a heavy-duty industrial lockable metal cover.

Reliable

• Commercial gear-driven transmission provides unsurpassed reliability.
• Heavy-Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 2 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Simplified Mounting and Wiring Routing for easier installations.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Manual Disconnect when unlocked allows gate to be operated manually.
• Quick Close and Anti-tailgate quickly secure property, preventing unauthorized access.
• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
• Mechanical Braking System: this solenoid-actuated brake system adds substantial gate position control at all points in travel and prevents the gate from being back driven.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• High-Starting Torque continuous-duty motor (available in 1, 1 1/2 and 2 HP)
• Operator Duty Rating: 25 Cycles per Hour
• Wormgear Reduction: 20:1 Wormgear reducer
• Mechanical Limit System: maintains accurate gate position throughout travel, even after using manual disconnect
• Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
• Chain: #50 nickel-plated (25ft. supplied)

Power

• 115/208/230VAC Single-Phase or 208/230/460/575vac 3-phase (575v includes factory-installed heater) (Specify when ordering)
• Accessory Power: 24VDC 500mA Max.
• Dual -Voltage Connections: increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements

Commercial-Grade Design

• Metal Frame: 7-gauge pre-galvanized steel
• Maximum Run Timer: protects against damage to the gate and operator by limiting the unit’s run time to 120 seconds
• Cover: powder-coated, pre-galvanized 16-gauge steel oil -tight, weatherproof NEMA 3R lockable cabinet
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 270 lbs.

Dimensions

• Height: 30.08”
• Width: 27.45”
• Depth: 17.14”

Recommended Capacities

• 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.

Temperature Specifications

• Without heater: -4°F (-20°C) to 140°F (60°C)
• With optional heater: (HTRNB—HTR460 for 460V operators) 40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 12” per second

Standard Features

• Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
• External Alarm Reset Button instantly resets the built - in safety alarm siren
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or Higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster RSL12U 12VDC Slide Gate Operator (RSL12U 12VDC)

LiftMaster RSL12U 12VDC Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE RSL12UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
• Synchronized Close Simultaneously closes gates.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK ® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Reciever Up to 50 remote controls (unlimited with 811LM/813LM).
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop and Mid-Travel Reversal Extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Lockable Manual Disconnect When unlocked allows gate to be operated manually.
• Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion.
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 12VDC or solar powered.
• Accessory Power 12VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
• Temperature Specifications
• Without Heater: -4°F (-20°C) to 140°F (60°C).
• With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 10 in. per second.

Construction

• P3 Motor 12VDC continuous-duty motor.
• Operator Duty Rating 120 cycles per day.
• Chassis Constructed with 1/4 in. gold-zinc plated steel for rust prevention.
• Worm Gear Reduction Commercial oil bath gearbox with 12:1 worm gear reduction.
• Cover 1-piece UV-resistant polyethylene cover.
• Operator Weight 100lbs.

RECOMMENDED CAPACITIES

• Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster CSL24U 24VDC Slide Gate Operator (CSL24U 24VDC)

LiftMaster CSL24U 24VDC Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE CSL24UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
• Pre-Motions Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK®Compatible Version 4 and higher.
• SECURITY+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Engineered For More Than 1 Million Cycles, Our P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop Extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Keyed Manual Disconnect When unlocked allows gate to be operated manually.
• Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 120V/230V Single Phase.
• Accessory Power 24VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications
• Without Heater: 4°F (-20°C) to 140°F (60°C).
• With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® 24VDC continuous-duty motor.
• Operator Duty Rating High-cycle, high-temperature continuous duty.
• CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
• Worm Gear Reduction Commercial oil bath gearbox providing 10:1 worm gear reduction.
• Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
• Operator Weight 140 lbs.

RECOMMENDED CAPACITIES

• Rated for gates up to 50 ft. in length or weighing up to 1,500 lbs.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL3000U Slide Gate Operator (SL3000U)

LiftMaster SL3000U Slide Gate Operator

AC High - Traffic Commercial Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE SL3000UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Dual Voltage Connections Eliminates expensive conduit costs and unsightly driveway scars.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• External Alarm Reset Button Instantly resets the built-in safety alarm siren.
• Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• Homelink® Compatible Version 4 and higher.
• SECURITY+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Our P3 Motor is designed to perform in the most demanding environments.
• Legacy Elite Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Manual Disconnect When unlocked allows gate to be operated. Connect to optional Fire Department Box to meet local fire code.
• Inherent Reversing Sensor Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.
• Limit Switch Design Provides precision limit accuracy and reliability.

Specifications

• Power 110V Single Phase.
• Accessory Power 24VDC, 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.

Temperature Specifications

• Without Heater: -4°F (-20°C) to 140°F (60°C).
• With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® High temperature continuous duty motor with class H (high-temperature) insulation is rated for high-cycle, high temperature applications.
• Operator Duty Rating Continuous duty.
• Chassis Same bolt pattern/footprint - Constructed with 1/4 in. gold zinc plated steel for rust/corrosion prevention.
• Worm Gear Reduction Commercial oil bath gearboxes with 30:1 wormgear reduction.
• Cover High-density UV resistant one piece polyethylene plastic for excellent heat and corrosion resistance.
• Operator Weight 140 lbs.

Recommended Capacities

• 1 HP Rated for gates up to 37 ft. in length or weighing up to 2,000 lbs.
• 1/2 HP Rated for gates up to 37 ft. in length or weighing up to 1,000 lbs.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL585U AC Slide Gate Operator (SL585U AC)

LiftMaster SL585U AC Slide Gate Operator

DISCONTINUED 8/1/2018 NOW SL585UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Dual Voltage Connections Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements. Voltage is selectable within phases at the time of installation with the placement of a connector.
• Single Phase: 115V, 208V and 230V
• 3 Phase: 208V, 230V and 460V
• 3 Phase: 575V is a discrete model without field-selectable voltage. Includes factory installed heater.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Mechanical Braking System Adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
• Maximum Run Timer Protects against damage to the gate and operator by limiting the unit’s runtime to 120 seconds.
• External Alarm Reset Button Allows for quick reset of the gate operator when the alarm has been activated.
• Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Homelink® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Our P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Lockable Manual Disconnect when unlocked allows gate to be operated.
• Lockout/Tagout Feature prevents power from being switched on. Safeguards workers from high-voltage power.
• Heavy Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 115/208/230 VAC. Single Phase. 208/230/460/575 VAC. 3 Phase.
• Accessory Power 24VDC, 500mA max.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C). UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 11 in. per second.

Construction

• P3 Motor® High starting torque continuous-duty motor.
• Operator Duty Rating 25 cycles per hour.
• Metal Frame 7-gauge pre-galvanized steel.
• Worm Gear Reduction 20:1 worm gear reducer.
• Chain #50 nickel-plated (25 ft. supplied).
• Cover Powder-coated, pre-galvanized 16-gauge steel oil tight, weatherproof NEMA 3R lockable cabinet.
• Operator Weight 240 lbs.

Recommended Capacities by Motor Size:

• 1/2 HP - 1000 Lbs Max, 45 Ft Max Width for Overhead or V-Groove Gates, 25 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 HP - 1600 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
• 1 1/2 HP - 1900 Lbs Max, 75 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 20 Cycles/Hr.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL595U AC Slide Gate Operator (SL595U AC)

LiftMaster SL595U AC Slide Gate Operator

DISCONTINUED 8/1/18 NOW SL595UL

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Dual Voltage Connections Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements. Voltage is selectable within phases at the time of installation with the placement of a connector.
• Single Phase: 115V, 208V and 230V
• 3 Phase: 208V, 230V and 460V
• 3 Phase: 575V is a discrete model without field-selectable voltage. Includes factory installed heater.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Mechanical Braking System Adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
• Maximum Run Timer Protects against damage to the gate and operator by limiting the unit’s runtime to 120 seconds.
• External Alarm Reset Button Allows for quick reset of the gate operator when the alarm has been activated.
• Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close. Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• Homelink® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• The P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Manual Disconnect when unlocked allows gate to be operated.
• Lockout/Tagout Feature prevents power from being switched on. Safeguards workers from high-voltage power.
• Heavy Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 115/208/230 VAC. Single Phase. 208/230/460/575 VAC. 3 Phase.
• Accessory Power 24VAC, 500mA max.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® High starting torque continuous-duty motor.
• Operator Duty Rating 25 cycles per hour.
• Metal Frame 7-gauge pre-galvanized steel.
• Worm Gear Reduction 20:1 worm gear reducer.
• Chain #50 nickel-plated (25 ft. supplied).
• Cover Powder-coated, pre-galvanized 16-gauge steel oil tight, weatherproof NEMA 3R lockable cabinet.
• Operator Weight 270 lbs.

Recommended Capacities

• 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
• 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL575 Slide Gate Operator (SL575)

LiftMaster SL575 Slide Gate Operator

THIS UNIT WAS DISCONTINUED BUT IS STILL REPAIRABLE

The LiftMaster® SL575 is a reliable continuous-duty operator for use on heavy-gate applications in commercial and light industrial locations. This resilient operator offers many standard features such as dual gate operation, sequenced access management, diagnostic LEDs, and more. The SL575 supports gate lengths up to 50 feet and gate weights up to 1,800 pounds, making it ideal for commercial and light industrial installations.

  *Built-in 312HM radio receiver
   *Universal footprint
   *Larger control box
   *Integrated 3-button control station
   *Large accessory tray
   *External manual disconnect
   *External reset button
   *Self-locking drive
   *Inherent obstruction sensing
   *External obstruction sensing
   *Advanced dual gate operation
   *Sequenced access management
   *Digital logic control
   *LED indicators
   *Warning device
   *Loop detector inputs
   *Timer to close
   *Maximum run timer
   *Emergency stop button
   *Maglock control
   *Control inputs
   *Mechanical braking
   *Limit settings
   *Surge & spike protection
   *Hinged access cover

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

****************

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL585 Slide Gate Operator (SL585)

LiftMaster SL585 Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE

The LiftMaster® SL585 is a durable heavy-duty gear-driven operator for use on heavy gates and high-cycle applications such as gated communities and industrial locations. The powerful design supports gate lengths up to 70 feet and gate weights up to 1,600 pounds. A strong powder-coated galvanized steel chassis, all-weather gearbox, as well as a weather-resistant, lockable cover ensure years of rugged and reliable performance. This model is ideal for heavy commercial and industrial installations and is UL325-compliant.

  *Built-in radio receiver
   *Universal footprint
   *Larger control box
   *Integrated 3-button control station
   *Large accessory tray
   *External manual disconnect
   *External reset button
   *Inherent obstruction sensing
   *External obstruction sensing
   *Advanced dual gate operation
   *Sequenced access management
   *Digital logic control
   *LED indicators
   *Warning device
   *Loop detector inputs
   *Timer to close
   *Maximum run timer
   *Emergency stop button
   *Maglock control
   *Control inputs
   *Mechanical braking
   *Limit settings
   *Surge & spike protection
   *Hinged access cover

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Sliding Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster SL595 Slide Gate Operator (SL595)

LiftMaster SL595 Slide Gate Operator

THIS UNIT WAS DISCONTINUED BUT IS STILL REPAIRABLE

The LiftMaster® SL595 is an extreme heavy-duty operator for industrial locations such as manufacturing plants and truck depots. The extremely powerful design supports gate lengths up to 90 feet and gate weights up to 2,500 pounds. Fully enclosed NEMA 3R oil-tight, weatherproof lockable cabinet and a high-starting continuous-duty torque motor with built-in overload protection ensure rugged and reliable performance. This model is ideal for the heaviest industrial installations and is UL325-compliant.

  *Built-in 312HM radio receiver
   *Larger control box
   *Integrated 3-button control station
   *External reset button
   *Inherent obstruction sensing
   *External obstruction sensing
   *Advanced dual gate operation
   *Sequenced access management
   *Digital logic control
   *LED indicators
   *Warning device
   *Loop detector inputs
   *Timer to close
   *Maximum run timer
   *Emergency stop button
   *Maglock control
   *Control inputs
   *Mechanical braking
   *Limit settings
   *Surge & spike protection
   *Manual disconnect
   *NEMA 3R enclosure
   *Hinged access cover

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster Gate Opener Remote Controls and Keypads:

**** The following is just a small list of some controls and accessories we replace and install, there are many more different solutions for the many different gate opener configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate opener.

Radio Recievers

Remotes

Keypads

To get on our schedule for your Liftmaster Gate Opener Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster 312HM Universal Coaxial Receiver (312HM)

Liftmaster 312HM Universal Coaxial Receiver with Security+®

312HM – 315 MHz

• External 8" whip antenna included.
• Security+® rolling code and/or DIP switch compatibility
• 12VDC or 18 - 35VAC/DC jumper selectable
• Momentary or constant contact, jumper selection
• 2-piece aluminum case with detachable cover
• High security memory stores up to 15 Security+® remote control or keyless entry codes
• Normal security memory stores up to 31 LiftMaster® remote control codes of any type
• FCC certified 315MHz

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***************

Liftmaster 412HM Universal Coaxial Receiver (412HM)

Liftmaster 412HM Universal Coaxial Receiver with Security+®

390 MHz

• External 8" whip antenna included.
• Security+® rolling code and/or DIP switch compatibility
• 12VDC or 18 - 35VAC/DC jumper selectable
• Momentary or constant contact, jumper selection
• 2-piece aluminum case with detachable cover
• High security memory stores up to 15 Security+® remote control or keyless entry codes
• Normal security memory stores up to 31 LiftMaster® remote control codes of any type
• FCC certified 315MHz

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

Liftmaster STAR 450 Commercial Universal Receiver (STAR450)

Liftmaster STAR 450 Commercial Universal Receiver

315 MHz or 390 MHz (Specify with order)

• For gate and commercial door operators
• Compact size; easy to program
• Reduces installation time; compact design fits inside most gate operators
• Universal receiver with antenna
• Rapid Learn® feature programs multiple transmitters in just seconds
• User-friendly programming technology makes it easy to add, block and delete up to 450 transmitters individually
• Ideal for gated communities, parking lots and garages
• Compatible with Chamberlain® Security+®, billion code and keyless entry technologies
• Duplicate memory module may be removed for programming additional receivers or for safe backup storage

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*******************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster Universal Remote Control (375LM)

LiftMaster Premium Remote Control

To get on our schedule for your Liftmaster Remote Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster 377LM Wireless Keyless Entry System (377LM)

LiftMaster 377LM Wireless Keyless Entry System

To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*****************

LiftMaster 387LM Wireless Keyless Entry System (387LM)

LiftMaster 387LM Wireless Keyless Entry System

Universal Keyless Entry

• Designed to work with a variety of brands of garage door openers
• Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
• Wireless – powered by one 9V battery (included)
• Weatherproof, slide-up protective cover
• Backlit keypad

To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***************