Swing Gate Opener Repair

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Swing Gate Opener Repair

    We have been a swing gate opener repair service company here in and around Keller Texas for over 20 years. Note: Most swing gate openers in residential settings are actuator swing gate openers (the ones with piston type arms) for most driveway swing gates, but some larger residential swing gates or swing gates decorated with woood are heavier than normal and may use the more commercial grade articulating swing gate openers (the ones where the two-part bending arm is attached directly to the top of the ground mounted control box), however there are some light commercial grade actuator swing gate opener options as well. Whether you need single actuator swing gate opener repair, double actuator swing gate opener repair, single articulating swing gate opener repair, or double articulating swing gate opener repair we are the company with experienced swing gate opener repair technicians that come out with the intent of actually repairing your existing swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our swing gate opener repair techs are experienced and skilled at repairing all types of swing gate openers, even the ones that others say that nobody works on. When we come out to do swing gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new swing gate opener installs as well if that is what you want, but we do swing gate opener repair on existing swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Automatic Swing Gate Opener Repair

    We have been an automatic swing gate opener repair service company here in and around Keller Texas for over 20 years. Note: Most automatic swing gate openers are electric swing gate openers and the two terms can be used interchangably, however there are some rare automatic swing gate openers that are not electic such as some on cattle ranches that open up when a truck drives onto a large pressure plate that automatically swings a gate without electricity. When you need automatic swing gate opener repair, we are the company with experienced automatic swing gate opener repair technicians that come out with the intent of actually repairing your existing automatic swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our automatic swing gate opener repair techs are experienced and skilled at repairing all types of automatic swing gate openers, even the ones that others say that nobody works on. When we come out to do automatic swing gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic swing gate opener installs as well if that is what you want, but we do automatic swing gate opener repair on existing automatic swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do automatic swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your automatic swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Electric Swing Gate Opener Repair

    We have been an electric swing gate opener repair service company here in and around Keller Texas for over 20 years. Note: All electric swing gate openers are automatic swing gate openers and the two terms can be used interchangably whether you are talking about electric swing gate openers that are AC powered or solar powered swing gate openers. When you need electric swing gate opener repair we are the company with experienced electric swing gate opener repair technicians that come out with the intent of actually repairing your existing electric swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new electric swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our electric swing gate opener repair techs are experienced and skilled at repairing all types of electric swing gate openers, even the ones that others say that nobody works on. When we come out to do electric swing gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new electric swing gate opener installs as well if that is what you want, but we do electric swing gate opener repair on existing electric swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do electric swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your electric swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Driveway Swing Gate Opener Repair

    We have been a driveway swing gate opener repair service company here in and around Keller Texas for over 20 years. Note: All electric driveway swing gate openers are automatic driveway swing gate openers and the two terms can be used interchangably whether you are talking about electric driveway swing gate openers that are AC powered or solar powered driveway swing gate openers. Most driveway swing gate openers work either single swing driveway gates, or double swing driveway gates. Whether you need driveway swing gate opener repair, automatic driveway swing gate opener repair, or electric driveway swing gate opener repair we are the company with experienced driveway swing gate opener repair technicians that come out with the intent of actually repairing your existing driveway swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new driveway swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our driveway swing gate opener repair techs are experienced and skilled at repairing all types of driveway swing gate openers, even the ones that others say that nobody works on. When we come out to do driveway swing gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new driveway swing gate opener installs as well if that is what you want, but we do driveway swing gate opener repair on existing driveway swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do driveway swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your driveway swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Solar Swing Gate Opener Repair

    We have been a solar swing gate opener repair service company here in and around Keller Texas for over 20 years. When you need solar swing gate opener repair we are the company with experienced solar swing gate opener repair technicians that come out with the intent of actually repairing your existing solar swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new solar swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our solar swing gate opener repair techs are experienced and skilled at repairing all types of solar swing gate openers, even the ones that others say that nobody works on. When we come out to do solar swing gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new solar swing gate opener installs as well if that is what you want, but we do solar swing gate opener repair on existing solar swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do solar swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your solar swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Actuator Arm Swing Gate Opener Repair

    We have been an actuator arm swing gate opener repair service company here in and around Keller Texas for over 20 years. When you need actuator arm swing gate opener repair we are the company with experienced actuator arm swing gate opener repair technicians that come out with the intent of actually repairing your existing actuator arm swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new actuator arm swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our actuator arm swing gate opener repair techs are experienced and skilled at repairing many types of actuator arm swing gate openers. When we come out to do actuator arm swing gate opener repair we do experienced diagnostics and testing to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new actuator arm swing gate opener installs as well if that is what you want, but we do actuator arm swing gate opener repair on existing actuator arm swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do actuator arm swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your actuator arm swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Articlulating Arm Swing Gate Opener Repair

    We have been an articulating arm swing gate opener repair service company here in and around Keller Texas for over 20 years. When you need articulating arm swing gate opener repair we are the company with experienced articulating arm swing gate opener repair technicians that come out with the intent of actually repairing your existing articulating arm swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new articulating arm swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our articulating arm swing gate opener repair techs are experienced and skilled at repairing many types of articulating arm swing gate openers. When we come out to do articulating arm swing gate opener repair we do experienced diagnostics and testing to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new articulating arm swing gate opener installs as well if that is what you want, but we do articulating arm swing gate opener repair on existing articulating arm swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do articulating arm swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your articulating arm swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Swing Gate Openers:

Apollo

USAutomatic - Patriot

Liftmaster

Viking

Ram

GTO

Linear

********** The following is just a small list of some swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Apollo Swing Gate Openers:

********** The following is just a small list of some Nice / Apollo swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Apollo swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

Apollo 1500

Apollo 1500ETL

Apollo 3500ETL

Nice Apollo 1500

Nice Apollo 1550

Nice Apollo 1551

Nice Apollo 3501

Nice Apollo 4300

Nice Apollo 4500

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Apollo 1500 Single Swing Gate Operator (1500)

Apollo 1500 Swing Gate Operator

SPECS

• Operates swing gates up to 16', 600 lbs.
• Can be installed on most existing or new swing gates
• Weather resistant
• 12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Apollo 1500ETL Single Swing Gate Operator (1550ETL)

Apollo 1500ETL Swing Gate Operator

Meets UL325 standard

SPECS

• Operates swing gates up to 16', 600 lbs.
• Can be installed on most existing or new swing gates
• Timer to close option
• Adjustable limits
• Soft Start/Stop Feature
• Weather resistant
• 12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Apollo 3500ETL Single Swing Gate Operator (3500ETL)

Apollo 3500ETL Swing Gate Operator

Meets UL325 standard

SPECS

• Operates swing gates up to 20', 1000 lbs.
• Post mounted
• Full systems capability
• Continuous duty operation
• Timer to close option
• Adjustable limits
• Innovative new arm design
• Weather resistant
• 12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Nice (Apollo) 1500 Swing Gate Operator (1500)

Nice (Apollo) 1500 Swing Gate Operator

636 control board

Apollo 1500 linear actuator for farm and ranch swing gates. 12VDC battery powered, AC or Solar. Open up to 600 lb/16ft gate leaf in 14 to 16 seconds, dependent on gate. Model operates with 636 control board. Kit includes CBOX, 816-1 arm and 318N receiver.

Note: Battery and battery charger or solar panel required for operation, not included. Nice recommends a 30-35Ah battery for AC applications and a 70Ah or larger battery for solar applications.

SPECS

• Duty Cycle   Varies based on charging capacity
• Arm Speed   14 - 16 seconds. dependent on gate
• Gate Length   up to 16 ft (5 m) leaf
• Gate Capacity   600 lb (272 kg)
• Drive Type   Electromechanical
• Voltage Input   12 - 30VDC
• Accessory Power   12VDC
• Temperature Rating   -4° to 122° F (-20° to 50° C)
• User Controls   636US board
• Relays   n/a
• App Class   n/a
• Enclosure   CBOX: Type 3R, 18w x 18h x 8d inch ( 46w x 46h x 20.3d cm)
• Finish Type   Black powder coat
• Warranty 2 year - *see manufacturer details

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Nice (Apollo) 1550 Swing Gate Operator (1550)

Nice (Apollo) 1550 Swing Gate Operator

936 control board

Apollo 1550 linear actuator for residential, farm and ranch swing gates. 12VDC battery powered, AC or Solar. Open up to 600 lb/16 ft gate leaf in 14 to 16 seconds, slowdown positions adjustable. Model operates with 936 control board. Kit includes CBOX, 816-1 arm, OXI/A receiver and a pair of BlueBUS through beam photo eyes.

Note: Battery and battery charger or solar panel required for operation, not included. Nice recommends a 30-35Ah battery for AC applications and a 70Ah or larger battery for solar applications.

SPECS

• Operator Kit   Single: CBOX936 and 816-1
• Twin: CBOX936, 816-1 and 816-2
• Duty Cycle   Varies based on charging capacity
• Arm Speed   14 - 16 seconds. Slowdown positions adjustable
• Gate Length   up to 16 ft (5 m) leaf
• Gate Capacity   600 lb (272 kg)
• Drive Type   Electromechanical
• Voltage Input   12 - 30VDC
• Idle Current   10 mA
• Accessory Power   12VDC and 24VDC 1A each
• Temperature Rating   -4° to 122° F (-20° to 50° C)
• User Controls   936US board
• Relays   2 relay outputs
• App Class   Usage Class I, II
• Enclosure   CBOX: Type 3R, 18w x 18h x 8d inch ( 46w x 46h x 20.3d cm)
• Finish Type   Black powder coat
• Warranty 2 year - *see manufacturer details

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Nice (Apollo) 1551 Swing Gate Operator (1551)

Nice (Apollo) 1551 Swing Gate Operator

Versatile: The 1551 swing gate operator with the single/dual advanced 1050 circuit board. Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power. The choice is yours! Easily installed on most existing or new gates.

The ideal solution for special applications: can be used in push to open or pull to open mode, increasing the flexibility of having the actuator inside or outside the gate, regardless of hinge left or right or direction of gate swing. The direct drive system attaches directly to the gate. Quality and durability to corrosion thanks to the housing, weather resistant NEMA 3R. Powder coated black.The actuator has rust proof linear acme screw drive and self-lubricating gears. Supplied with 16 ft. of cable.

FEATURES

• Easy to install
• LCD Display
• Plug-in receiver: up to 1,000 rolling-code transmitters
• 7 day programmable event timer
• Innovative Obstacle Detection System
• Surge Protection
• Programmable Inputs and Outputs
• Advanced Dual Gate Management
• Solar power compatible
• Built in solar regulator
• Corrosion resistant

SPECS

• Power Supply 12-30VDC
• Operating Voltage 12VDC
• Current Draw 10 mA (standby)
• Speed 14-16 Seconds (90 Degrees)
• Duty Cycle Varies based on charging capacity
• Dimensions (Control Box) 18 x 18 x 18 in.
• Dimensions (Actuator) 42" Retracted - 66" Extended

TECHNOLOGY

• Solar Power
• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Nice (Apollo) 3501 Swing Gate Operator (3501)

Nice (Apollo) 3501 Swing Gate Operator

The 3501 single swing gate operator using the single/dual advanced 1050 circuit board. For swing gates up to 1,000 lbs weight and 20 ft length each.

Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power. The choice is yours!

Easily installed on most existing or new gates, with practical adjustment of the extension arm and limit switches. The motor’s low profile design allows for compact installation. A 4x4 post with heavy wall tubing is recommended.

Quality and durability with the corrosion resistant housing. Safe, the arm design eliminates major pinch points.

FEATURES

• Easy to install
• LCD Display
• Plug-in receiver: up to 1,000 rolling-code transmitters
• 7 day programmable event timer
• Innovative Obstacle Detection System
• Surge Protection
• Programmable Inputs and Outputs
• Advanced Dual Gate Management
• Solar power compatible
• Built in solar regulator
• Corrosion resistant

SPECS

• Power Supply 12-30VDC
• Operating Voltage 12VDC
• Current Draw 10mA (standby)
• Speed 12-20 Seconds (90 Degrees)
• Duty Cycle Varies based on charging capacity
• Dimensions (Control Box) 18 x 18 x 18 in.
• Dimensions (Chasis) 17.8 x 12 x 8.3 in

TECHNOLOGY

• Solar Power
• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Nice (Apollo) 4300 Swing Gate Operator (4300)

Nice (Apollo) 4300 Swing Gate Operator

½ HP, 24 V motor, 120 Vac Swing Gate Operator.

Operator for swing gates up to 600 lbs weight and 16 ft length.

Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.

Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.

Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.

Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard.

Master/slave management: two units synchronized for dual application.

Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.

FEATURES

• 24 V motors, 120 Vac main power.
• 1/2 HP
• Easy to install
• LCD Display
• Plug-in receiver: up to 1,000 rolling-code transmitters
• 7 day programmable event timer
• Innovative Obstacle Detection System
• Surge Protection
• Programmable Inputs and Outputs
• Advanced Dual Gate Management
• Corrosion resistant

SPECS

• Input Power: 120VAC
• Motor 24VDC 1/2HP
• Maximum Speed 1.8 (RPM)
• Opening Speed 12-18 Seconds (90 Degrees)
• Maximum Torque 550 (Nm)
• Size 18.1 L x 18.5 W x 27.5 H
• Weight 150 lbs

TECHNOLOGY

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Nice (Apollo) 4500 Swing Gate Operator (4500)

Nice (Apollo) 4500 Swing Gate Operator

1 HP, 24 V motor, 120 Vac Swing Gate Operator. Operator for swing gates up to 1000 lbs weight and 20 ft length.

Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.

Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.

Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.

Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard.

Master/slave management: two units synchronized for dual application.

Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.

FEATURES

• 24 V motors, 120 Vac main power.
• 1 HP
• Easy to install
• LCD Display
• Plug-in receiver: up to 1,000 rolling-code transmitters
• 7 day programmable event timer
• Innovative Obstacle Detection System
• Surge Protection
• Programmable Inputs and Outputs
• Advanced Dual Gate Management
• Corrosion resistant

SPECS

• Input Power: 120VAC
• Motor 24VDC 1HP
• Maximum Speed 1.8 (RPM)
• Opening Speed 12-18 Seconds (90 Degrees)
• Maximum Torque 850 (Nm)
• Size 18.1 L x 18.5 W x 27.5 H
• Weight 155 lbs

TECHNOLOGY

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

USAutomatic Swing Gate Openers:

********** The following is just a small list of some USAutomatic swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your USAutomatic swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

USAutomatic Patriot

USAutomatic Ranger

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

USAutomatic Patriot Single Swing Gate Operator (Patriot)

USAutomatic Patriot Swing Gate Operator

THE FASTEST OPERATOR FOR SWING GATES UP TO 16 FEET AND 650 LBS EACH LEAF

AC or Solar charged

Backed by a 5 yearcontrol board / 3 year all other components Warranty

Ideal for the installation requiring faster operating speed, proven strength and reliability the Patriot is unmatched in the industry with 14 years of superior performance.
Solar charged gate operators from USAutomatic are the most efficient in the industry.

FEATURES

• Made in the USA
• Warranty: 5 year control board / 3 year - *see manufacturer for details
• all other components
• 2 - LCR 2 button transmitters Included
• Pre-wired solar friendly LCR dual channel receiver
• Same control board for Single, Dual or Slide operator
• Solar or AC charged with solar friendly Smart charge controller
• Designed to operate with all types of solar friendly accessories without adding solar panels
• Independent Gate 1 and Gate 2 sensitivity adjustment
• Soft stop selectable for swing or slide operators
• Battery powered providing real battery backup. Not just a few cycles
• Built in Timer to Close
• Photo Eye Power Management (PEPM) solar friendly software
• For Residential, light commercial, farm and ranch use
• Fast ~12 second cycle time (90 degree opening)
• Danaher 24” linear actuator delivering 500 lbs of dynamic thrust and a static hold load rating of 1000 lbs
• Single or Dual gate compatible

To get on our schedule for your Patriot gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

USAutomatic Ranger Single Swing Gate Operator (Ranger)

USAutomatic Ranger Swing Gate Operator

FOR SWING GATES UP TO 13 FEET AND 400 LBS

• AC or Solar charged

• 3 Year Warranty - * see manufactuer for details

The Ranger series of gate operators is full of innovative design changes and is defining the next generation of low voltage DC gate operators in the industry.

Introducing Quick connect harnesses for all standard components, industry first limit switch technology (patent pending), AC charger included with all operators and external reset.

Linear actuator design allows for mounting in 2 different positions making it easy to hide behind a cross member in the gate which improves the aesthetic appeal.

Ranger solar performance is exceptional and unmatched in the industry, offering up to 65 cycles per day on the standard 6 watt solar panel with a full complement of solar friendly accessories and photo eyes for safety installed.

FEATURES

• Made in the USA
• Warranty 3 years on all components
• 2 - LCR 2 button transmitters Included
• Pre-wired solar friendly LCR dual channel receiver
• Solar or AC charged with solar friendly smart controller
• Designed to operate with all types of solar friendly accessories without adding solar panels
• Independent Gate 1 and Gate 2 sensitivity adjustments
• Battery powered providing real battery backup. Not just 1 cycle
• Built in timer to close
• Photo Eye Power Management (PEPM) solar friendly software
• For residential, light commercial, farm and ranch use
• Danaher 16” Linear actuator delivering 400 lbs of dynamic thrust and a static hold load rating of 1000 lbs
• Single or Dual gate compatible
• Dual gate kit includes water tight junction box and wire nuts with 35 feet of cable.
• Hinged control box cover
• Bolt on kit option is available

To get on our schedule for your USAutomatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster Swing Gate Openers:

********** The following is just a small list of some Liftmaster swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Liftmaster swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

Liftmaster LA400

Liftmaster LA400DC

Liftmaster LA400PKGUL

Liftmaster LA412

Liftmaster LA412DC

Liftmaster LA412PKGUL

Liftmaster LA500DC

Liftmaster LA500PKGUL

Liftmaster LA500XL20W

Liftmaster RSW12U

Liftmaster RSW12UL

Liftmaster CSW24U

Liftmaster CSW24UL

Liftmaster CSW200

Liftmaster CSW200UL

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA400 Single Swing Gate Operator (LA400)

LiftMaster LA400 Swing Gate Operator

The LA400 has a powerful 24VDC motor, which provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA400 is capable of operating gates up to 16 ft. long and weighing up to 550 pounds (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft).

An on-board radio receiver is included with the LA400. Exclusive from Chamberlain, this provides a single remote control solution for gates and additional access points.

• On-board radio receiver
• Built-in radio receiver
• DC operator system
• Battery-run system
• Slow start/stop
• Inherent obstruction sensing
• External obstruction sensing
• Control inputs
• Bi-part latch
• Timer to close
• LED indicators
• Electronic limit system
• Keyed manual disconnect

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA400DC Primary Linear Actuator Single Swing Gate Operator (LA400DC)

LiftMaster LA400DC Primary Linear Actuator Swing Gate Operator

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Best in class power management technology extends battery backup for up to 97 days* without recharging, providing greater security and reliability. No one else can offer you that peace of mind.

Connectivity

• MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
• Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
• MyQ Mobile App is a free download with no annual activation fee.
• Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.

Performance

• Battery Backup safeguards your property by providing up to 400 cycles* or up to 97 days* of standby power when the power is down.
• Solar Ready Ultra Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
• Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
• Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs. (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft)

Safety and Security

• Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
• Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
• UL/cUL Listed tested to the most stringent industry guidelines.

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA400PKGUL 24VDC Linear Actuator Single Swing Gate Operator (LA400PKGUL)

LiftMaster LA400PKGUL 24VDC Linear Actuator Swing Gate Operator

Unrivaled Performance, Safety and Accessibility Exclusively LiftMaster:

Battery Backup Secures and safeguards your property by providing up to 400 cycles or up to 97 days of standby power when the power is down.

Security+2.0® - Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ® - Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors - LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Gate Size - rated for gates up to 16 ft. in length or weighing up to 850 lbs. (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft)

FEATURES

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
• Synchronized Close Simultaneously closes gates.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Commercial –Duty Cast Aluminum Housing With Heavy-Duty DC Motor Powerful enough to perform in the most demanding applications
• Soft Start/Stop and Mid-Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
• Keyed Manual Disconnect when unlocked, allows gate to be operated manually.
• Inherent Reversing Sensor detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
• Fire Department Compliance allows gate to auto open upon loss of AC power or battery depletion
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Party Pass allows for the gates to be held open for an extended period of time, ideal for parties.

SPECIFICATIONS

• Power 24VDC or solar power. 120/230V Single Phase (Standard control box).
• Accessory Power 24VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
• Temperature Specifications -4°F (-20°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 90-degree opening in 15-17 seconds.

CONSTRUCTION

• P3 Motor® 24VDC continuous-duty motor.
• Operator Duty Rating 100 cycles per day.
• Worm Gear Reduction Precision machined all-metal gear drive.
• Operator Weight Actuator arm 19 lbs. Standard control box 13 lbs.
• Includes (2) 7Ah batteries

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA412 Single Swing Gate Operator (LA412)

LiftMaster LA412 Solar Powered Swing Gate Operator

The LA412 is a solar powered residential swing gate operator with EverCharge® Power Management System – it delivers power when needed most for opening the gate and minimizes power consumption at all other times for best solar performance. Its DC motor provides soft start/soft stop operation, which promotes longer gate and operator life, as well as dependable performance. The LA412 is capable of operating gates up to 16 feet long and weighing up to 850 pounds(850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft).

An on-board radio receiver is included with the LA412. Exclusive from Chamberlain®, this provides a single remote control solution for gates, garage doors, and additional access points.

• Solar panel*
  NOTE: Additional panels may be required depending on single or dual gate application, geographical location, number of cycles per day, and accessories used.
• On-board radio receiver
• DC motor - slow start/stop operation
• Inherent obstruction sensing
• External obstuction sensing
• Control inputs
• Bi-part relay
• Timer-to-close
• LED indicators
• Electronic limit system
• Keyed manual disconnect

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA412DC Solar Primary Linear Actuator Single Swing Gate Operator (LA412DC)

LiftMaster LA412DC Solar Primary Linear Actuator Swing Gate Operator

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Industry-leading power management technology delivers power when you need it most to operate your gate and minimizes power draw at all other times. Receive up to 126 days* of stand by time without recharging. No other company can offer you that peace of mind.

Connectivity

• MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
• Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
• MyQ Mobile App is a free download with no annual activation fee.
• Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.

Performance

• Solar Optimized Ultra-Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
• Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
• Gate Size - rated for gates up to 16 ft. in length or weighing up to 850 lbs. (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft)

Safety and Security

• Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
• Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
• UL/cUL Listed tested to the most stringent industry guidelines.

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA412PKGUL 12VDC Solar Linear Actuator Single Swing Gate Operator (LA412PKGUL)

LiftMaster LA412PKGUL Solar Primary Linear Actuator Swing Gate Operator

Solar Model

Security+2.0®

MyQ ®

P3 Motors

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
• Synchronized Close Simultaneously closes gates.
• Keyed Manual Disconnect When unlocked, allows gate to be operated manually.
• Inherent Reversing Sensor Detects obstructions or increased loads. Reverses gate when closing or tops/reverses the gate when opening.
• Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.
• Commercial-Duty Cast Aluminum Housing With Heavy-Duty DC Motor Powerful enough to perform in the most demanding applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Soft Start/Stop and Mid-Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.

With optional Expansion board

• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt or breaks photo bean. Once vehicle backs up, gate will continure to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.

Specifications

• Power Solar Powered system accepts up to 30W 12V panels.
• Accessory Power 24VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).Safety and Security

Construction

• P3 Motor ® 24VDC continuous-duty motor.
• Operator Duty Rating See Solar Daily Cycle Rate Chart by Zone.
• CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
• Worm Gear Reduction Precision machined all-metal gear drive.
• Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
• Operator Weight 206 lbs.
• Actuator Arm Weight 19 lbs.
• Standard Control Box Weight 13 lbs.
• Includes (2) 7Ah batteries.

Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft).

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster LA500 / LiftMaster LA500DC Linear Actuator Single Swing Gate Operator (LA500DC)

LiftMaster LA500DC Primary Linear Actuator Swing Gate Operator

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Our industry-leading power management technology extends battery backup for up to 24* days without recharging, providing greater reliability and security. No other company can offer you that peace of mind.

Connectivity

• MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
• Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
• MyQ Mobile App is a free download with no annual activation fee.
• Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.

Performance

• Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.
• Solar Ready Ultra Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
• Gate Size rated for gates up to 18 ft. in length or weighing up to 1600 lbs (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft).
• Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications.
• Soft start/stop operation extends operator and hardware life for heavy-duty gate use.

Safety and Security

• Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
• Quick Close/Anti Tailgate Selectable Feature quickly secures gate and prevents unauthorized access.
• Plug-in Loop Detector Inputs Innovative Design ensures vehicles are easily identified to exit property or interrupt gate travel if a vehicle is in its path.
• Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
• UL/cUL Listed tested to the most stringent industry guidelines.

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA500PKGUL 24VDC Linear Actuator Single Swing Gate Operator (LA500PKGUL)

LiftMaster LA500PKGUL 24VDC Linear Actuator Swing Gate Operator

Connectivity

• Confidently know what’s going on at home with MyQ Technology. It lets you monitor and control your Gate Operator and home lighting from anywhere (when paired with the LiftMaster Internet Gateway).
• Receive email or text alerts so you always know the status of your gate and lighting.
• Get the MyQ mobile app for free. No annual activation fee required.
• Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.

Performance

• Get on and off your property even when the power’s out with our Battery Backup feature and ultra-efficient Power Management System – up to 500 cycles or 24 days.
• Delivers the performance you need, when you need it with an ultra-reliable Solar Power System.
• Features a Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
• Gate Size rated for gates up to 18 ft. in length or weighing up to 1600 lbs (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft).

Safety and Security

• Never wait for the gate and safely enter your property with Security+2.0™ - patented multi-frequency secure radio technology virtually eliminates interference and offers 2X the range of standard remotes.
• Make sure only one vehicle enters your property at a time with our Quick-Close feature.
• Ensure that vehicles interrupt gate closure if a vehicle is in the gate’s path with our innovative plug-in loop detectors.
• Attach additional safety reversing devices with provided safety inputs. Each entrapment point should be protected with its own device.
• Tested to UL/cUL listed standards to meet the most stringent industry guidelines.

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster LA500XL20W XL Control Box Solar Kit Single Swing Gate Operator (LA500XL20W)

LiftMaster LA500XL20W XL Control Box Solar Kit Single Swing Gate Operator

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Our industry-leading power management technology extends battery backup for up to 24* days without recharging, providing greater reliability and security. No other company can offer you that peace of mind.

Connectivity

• MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
• Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
• MyQ Mobile App is a free download with no annual activation fee.

Performance

• Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.
• Solar Ready Ultra Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
• Gate Size rated for gates up to 18 ft. in length or weighing up to 1600 lbs (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft).
• Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications.
• Soft start/stop operation extends operator and hardware life for heavy-duty gate use.

Safety and Security

• Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
• Quick Close/Anti Tailgate Selectable Feature quickly secures gate and prevents unauthorized access.
• Plug-in Loop Detector Inputs Innovative Design ensures vehicles are easily identified to exit property or interrupt gate travel if a vehicle is in its path.
• Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
• UL/cUL Listed tested to the most stringent industry guidelines.

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster RSW12U 12VDC Swing Gate Operator (RSW12U)

LiftMaster RSW12U 12VDC Swing Gate Operator

DISCONTINUED BUT STILL REPAIRABLE 8/1/18 NOW RSW12UL

Exclusively LiftMaster:

Battery Backup Secures and safeguards your property by providing up to 146 cycles or up to 24 days of standby power when the power is down.

Security+2.0® Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ® Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• With optional Expansion Board Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
• Synchronized Close Simultaneously closes gates.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK® Compatible Version 4 and higher.
• SECURITY+ 2.0 ® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop and Mid Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Fire Department Compliance allows gate to auto open upon loss of AC power or battery depletion
• Emergency Release Simple-to-use release handle allows gate to be operated manually and maintain limit position once re-engaged.
• Quick Close/Anti-Tailgate quickly secures property, preventing unauthorized access.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Maximum Gate Weight/Length (400 lbs @ 16 ft, 600 lbs @12 ft, 700 lbs @ 10 ft, 800 lbs @ 8 ft, 1000 lbs @ 6 ft)
• Power 12VDC or Solar Powered.
• Accessory Power 12VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C).
• With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
• UL Usage Class I, II, III, and IV.
• Gate Travel Speed 90-degree opening in 13-15 seconds.

Construction

• P3 Motor® 12VDC continuous-duty motor.
• Operator Duty Rating 250 cycles per day.
• CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
• Worm Gear Reduction Two commercial oil bath gearboxes providing 900:1 worm gear reduction.
• Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
• Operator Weight 180 lbs.

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster RSW12UL 12VDC Swing Gate Operator (RSW12UL)

LiftMaster RSW12UL 12VDC Swing Gate Operator

RSW12UL features battery backup that provides up to 147 cycles or 63 days of standby power.

Reliable

• Battery Backup provides seamless access by providing standby power when the power is down.
• Solar-Ready, Ultra-Reliable System delivers power when and where you need it.
• Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
• Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Warranty 3 years - * see manufactuer for details.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Emergency Disconnect: simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Quick Close and Anti-Tailgate quickly secure property, preventing unauthorized access (requires optional expansion board).
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.

Mechanics

• 12VDC continuous-duty motor
• Operator Duty Rating: 250 cycles per day
• Wormgear Reduction: 2 commercial oil -bath gearboxes providing 900:1 Wormgear reduction

Power

• 115VAC
• Solar-Ready, Ultra-Reliable System delivers power when and where you need it
• Accessory Power: 12VDC 500mA Output

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: High-density, UV-resistant polycarbonate 2-piece for excellent heat and corrosion resistance
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 180 lbs.

Dimensions

• Height: 27.99”
• Width: 15.55”
• Depth: 19.63”
• Maximum Gate Weight/Length (400 lbs @ 16 ft, 600 lbs @12 ft, 700 lbs @ 10 ft, 800 lbs @ 8 ft, 1000 lbs @ 6 ft)

Temperature Specifications

• Without Heater: -4°F (-20°C ) to 140°F (60°C)
• With Optional Heater (HTR) -40°F (-40°C ) to 140°F (60°C)

Gate Travel Speed

• Opens 90° in 12-15 seconds

Standard Features

• Inherent Reversing Sensor detects obstruct ions and reverses gate when closing or stops/reverses gate when opening
• Bi-Part Delay monitors and adjusts speed and position of each wing to ensure primary gate closes last
• Synchronized Close simultaneously closes gates
• Monitored Safety Inputs 3 main board, 3 optional expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811lm/813lm)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

This gate operator qualifies for a 30% tax credit

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster CSW24U 24VDC Swing Gate Operator (CSW24U)

LiftMaster CSW24U 24VDC Swing Gate Operator

DISCONTINUED BUT STILL REPAIRABLE 8/1/2018 NOW CSW24UL

Unrivaled Performance, Safety and Accessibility
Exclusively LiftMaster:

Battery Backup Secures and safeguards your property by providing up to 146 cycles or up to 24 days of standby power when the power is down.

Security+2.0® Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ® Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
• Synchronized Close Simultaneously closes gates.
• Pre-Motion Warning Alarm Activates on-board alarm three seconds prior to gate motion.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK® Compatible Version 4 and higher.
• SECURITY+ 2.0 ® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Engineered For More Than 1 Million Cycles, Our P3 Motoris designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop and Mid Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Fire Department Compliance allows gate to auto open upon loss of AC power or battery depletion
• Quick Close/Anti-Tailgate quickly secures property, preventing unauthorized access.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 120V/230V Single Phase.
• Accessory Power 24VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).Safety and Security.
• Gate Travel Speed 90-degree opening in 13-15 seconds.
• Maximum Gate Weight/Length (1600 lbs @ 8 ft, 800 lbs @16 ft, 600 lbs @ 18 ft)

Construction

• P3 Motor ® 24VDC continuous-duty motor.
• Operator Duty Rating High-cycle, high-temperature continuous duty.
• CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
• Worm Gear Reduction Two commercial oil bath gearboxes providing 900:1 worm gear reduction.
• Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
• Operator Weight 206 lbs.

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster CSW24UL 24VDC Swing Gate Operator (CSW24UL)

LiftMaster CSW24UL 24VDC Swing Gate Operator

CSW24UL features battery backup that provides up to 146 cycles or 24 days of standby power.

Reliable

• Battery Backup provides seamless access by providing standby power when the power is down.
• Smooth Start/Stop Operation and mid-travel reversal extend operator hardware life.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Warranty 5 years commercial, 7 years residential. * See Manufactuer for details.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.
• Synchronized Close simultaneously closes gates.

Safe and Secure

• Security+ 2.0® Safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Emergency Disconnect: simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Quick close and anti-tailgate quickly secure property, preventing unauthorized access.
• UL® Listed Gate operators with monitored safety entrapment protection devices.

Included Accessories:

• LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.

Mechanics

• 24VDC Continuous-duty motor
• Operator Duty Rating: high-cycle, high-temperature continuous duty
• Wormgear Reduction: 2 commercial oil-bath gearboxes providing 900:1 Wormgear Reduction

Power

• 120/230VAC Single-Phase
• Optional Kit (3PHCONV) to convert an input voltage of 208/230/460/575VAC to an output voltage of 120VAC
• Accessory Power: 24VDC 500mA Max.
• Solar option available

Commercial Grade Design

• Chassis: Constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: high-density, UV-resistant polycarbonate 2-piece for heat and corrosion resistance
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 206 lbs.
• Maximum Gate Weight/Length (1600 lbs @ 8 ft, 800 lbs @16 ft, 600 lbs @ 18 ft)

Dimensions

• Height: 27.99”
• Width: 19.63”
• Depth: 15.55”

Temperature Specifications

• Without Heater -4°F (-20°C ) to 140°F (60°C)
• With Optional Heater (HTR) -40°F (-40°C ) to 140°F (60°C)

Gate Travel Speed

• Opens 90° in 13-15 seconds

Standard Features

• Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses gate when opening
• Bi-Part Delay monitors and adjusts speed and position of each wing to ensure primary gate closes last
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible Version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle.
• Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster CSW200 AC Swing Gate Operator (CSW200)

LiftMaster CSW200 AC Swing Gate Operator

DISCONTINUED BUT STILL REPAIRABLE 8/1/18 NOW CSW200UL

Exclusively LiftMaster:

Security+2.0®

Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®
Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors
LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
• Synchronized Close Simultaneously closes gates.
• Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
• Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• External Alarm Reset Button Instantly resets the built-in safety alarm siren.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close. QUICK CLOSE Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK® Compatible Version 4 and higher.
• SECURITY+ 2.0® On-Board Radio Reciever Up to 50 remote controls (unlimited with 811LM/813LM).
• OUR P3 Motor is designed to perform in the most demanding environments.
• Legacy Elite Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop and Mid Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Emergency Release simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
• Quick Close/Anti-Tailgate quickly secures property, preventing unauthorized access.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 110V Single Phase.
• Accessory Power 24VAC, 500mA max.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With Optional Heater (HTRNB): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 90-degree opening in 13-15 seconds.

Construction

• P3 Motor® High-temperature continuous duty motor with class H (high-temperature) insulation is rated for highcycle, high-temperature applications.
• Operator Duty Rating Continuous duty.
• Chassis Same bolt pattern/footprint, constructed with 1/4 in. gold zinc-plated steel for rust prevention.
• Worm Gear Reduction Two commercial oil bath gearboxes providing 900:1 worm gear reduction.
• Cover High-density, 2-piece UV-resistant polyethylene cover.
• Operator Weight 175 lbs.

RECOMMENDED CAPACITIES

• ½ HP – Maximum Gate Weight/Length (1600 lbs @ 8 ft, 1200 lbs @12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft)
• 1 HP – Maximum Gate Weight/Length (2000 lbs @ 12 ft, 1600 lbs @16 ft, 1400 lbs @ 18 ft, 1000 lbs @ 22 ft)

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster CSW200UL AC Swing Gate Operator (CSW200UL)

LiftMaster CSW200UL AC Swing Gate Operator

CSW200UL features continuous duty high temperature motor.

Reliable

• Legacy Elite Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
• Warranty 5 years commercial, 7 years residential. * See manufacturer for details.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/closing and eliminates expensive driveway trenching costs.
• Synchronized Close simultaneously closes gates.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Emergency Disconnect: simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
• Quick Close And Anti-Tailgate quickly secure property, preventing unauthorized access.
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories:

• LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.

Mechanics

• Continuous-Duty Motor rated for high-cycle, high-temperature applications (available in 1/2 and 1 HP)
• Wormgear Reduction: 2 commercial oil-bath gearboxes providing 900:1 wormgear reduction

Power

• 115V Single-Phase
• Accessory Power: 24VDC 500mA output
• Optional Kit (3PHCONV) to convert an input voltage of 208/240/460/575VAC to an output voltage of 115VAC

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: high-density, 2-piece UV-resistant polyethylene cover
• UL® Usage Classification: I, II, III and IV operator weight: 175 lbs.

Dimensions for CSW200501UL

• Height: 28.04”
• Width: 16.37”
• Depth: 19.59”

CSW200501_Capacities

• ½ HP – Maximum Gate Weight/Length (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft)

Dimensions for CSW200101UL

• Height: 27.99”
• Width: 15.20”
• Depth: 24.75”

CSW200101_Capacities

• 1 HP – Maximum Gate Weight/Length (2000 lbs @ 12 ft, 1600 lbs @16 ft, 1400 lbs @ 18 ft, 1000 lbs @ 22 ft)

Temperature Specifications

• Without Heater: -4°F (-20°C ) to 140°F (60°C)
• With Optional Heater: (HTRNB) -40°F (-40°C ) to 140°F (60°C)

Gate Travel Speed

• Opens 90° in 13-15 seconds

Standard Features

• Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
• Bi-Part Delay monitors and adjusts speed and position of each wing to ensure primary gate closes last
• Mechanical Limit System maintains accurate gate position throughout gate travel, even after using manual disconnect
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811lm/813lm)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy

To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Swing Gate Openers:

********** The following is just a small list of some Viking swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Viking swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

Viking E4

Viking F1

Viking G5

Viking G5S

Viking R6

Viking R6S

Viking T21

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Single Swing E4 Gate Operator (Viking E4)

Viking Single Swing E4 Gate Operator

Max Gate Capacity 850 lbs/10' or 550 lbs/16'

Residential DC motor equivalent to 1/3 HP AC motor

High Efficiency Motor - Viking Access Systems has designed a unique high efficiency motor that features built-in high torque, high temperature, and is 100% continuous duty. While meeting the exact requirements needed to open and close your gate, Viking surpasses in engineering.

Water resistant motor
High torque, low current

Complete Manual Release Handle - Providing security and assurance, Viking has provided a lock cover to secure unwanted access to the gate operator. Each lock cover comes with a key designed and provided by Viking Access Systems.

Adjustable Positive Stop Limits - Viking has created an elite system by using the positive stop system, that prevents the gate from over passing the open/close limit or slamming.

Protection - The Viking E4 Swing Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that that chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

Field Service Repairable - Viking makes repairing an operator as simple as possible. Throwing away an operator after the warranty expires is a thing of the past. Parts can be replaced and repaired onsite, saving time and money for the end user.

Break Away Joint - The Viking Break Away Joint prevents the whole gate operator from obtaining damage beyond repair. If there is a light impact to the gate, the joint will split in two, thus protecting the primary gear drive.*

*WARNING! Sever impact or opposing force can damage other internal parts.

The new E-4™ Residential Swing Gate Operator leads the industry in being the best, most cost effective residential linear arm actuator. This new design allows for a maximum gate capacity of 850 lbs/10’ or 550 lbs/16'. Featuring a convenient manual release handle and pre-wiring for an easy and quick installation. It is ready to be powered with low voltage wiring, allowing installation versatility and accuracy. The E-4™ offers a 2 year residential warranty and UL compliance.

Features

• MAX GATE CAPACITY 850 lbs/10' or 550 lbs/16'
  This is the maximum amount of weight and length that the gate operator model can push/pull.
• MAX OPERATING SPEED 12 - 16 Seconds per 90°
  Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
• E-4 CONTROL BOARD - New Control Board
  1 Board is designed to control a single or dual gate, no other boards necessary
• OPERATING TEMP -20°F up to 160°F
  The Viking gate Operator will continue to function within this temperature range.
• WARRANTY 2 Yr Residential
  Please refer to Warranty Policy on the viking website for more information.
• STRIKE PROTECTION 10,000 Amps / 20,000 Volts
  Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Single Swing F1 Gate Operator (Viking F1)

Viking Single Swing F1 Gate Operator

Max Gate Capacity 1500 lbs/12' or 1000 lbs/16'
Residential & Commercial DC motor equivalent to 1/2 HP motor

Quick Release Handle - Viking's Quick Release Handle is ready for any situation. In the event where a gate needs to be open/closed manually, such as power loss, Viking makes it easy and accessible.

V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.

• Diagnostic, Voltages, Settings, and Status Display
• Conveniently labeled enclosure
• Ergonomically located

LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthy manual, making troubleshooting quick and efficient.

Multi-layer Corrosion Protection - Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

• G90 Galvanized
• Clear Zinc Plating
• UV Rated Powder coating
• 1/4" Steel Chassis

Removable Power Supply - Created for convenience, the Patented Viking Removable Power Box can be pulled out from Viking's Gate Operator and mounted near a high voltage line, allowing you to run 24 volts to the opener. This eliminates the need of trenching for high voltage lines and permit fees.

• Convenient fuse access
• LED status indicators
• Convenient power switch
• E-Z access power outlet
• E-Z set-up 120V/240V
• Includes low voltage option

The F-1™ Swing Gate Operator, includes the V-Flex control board and a removable power supply box for low voltage wiring. The removable power supply box allows you to run low voltage to the gate operator rather than high voltage which removes the need to trench high voltage wires. This can save the home or business owner thousands in labor and permit costs.. The V-Flex control board provides a LCD display for diagnostics and operator status. The new 1/4" steel chassis allows an increased handling capacity for gates up to 1500 lbs. The F-1™ operator also features Viking's soft-start / soft-stop, built-in heater and Viking's true battery backup system. Smooth gate operation, compliant to both ETL and UL standards with 5 year commercial or 7 year residential warranty makes the F-1™ operator the ideal choice for your gate automation needs.

Features

• MAX GATE CAPACITY 1500 lbs/12' or 1000 lbs/16'
  This is the maximum amount of weight and length that the gate operator model can push/pull.
• MAX OPERATING SPEED 13 - 16 Seconds per 90°
  Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
• REMOVABLE POWER SUPPLY
  For Remote 24VDC Power Supply
  Convenient fuse access, L.E.D. status indicators, power switch, E-Z access power outlet & set-up 115V/230V.
• OPERATING TEMP -20°F up to 160°F
  The Viking gate Operator will continue to function within this temperature range.
• WARRANTY 5 Yr Commercial / 7 Yr Residential
  Please refer to Warranty Policy on the viking website for more information.
• STRIKE PROTECTION 10,000 Amps / 20,000 Volts
  Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Single Swing G5 Gate Operator (Viking G5)

Max Gate Capacity 2000 lbs/10' or 800 lbs/18'

Residential & Commercial DC motor equivalent to 1/2 HP AC motor

High Efficiency Motor - Viking Access Systems has designed a unique high efficiency motor that features built-in high torque, high temperature, and is 100% continuous duty. While meeting the exact requirements needed to open and close your gate, Viking surpasses in engineering.

• Water resistant motor
• High torque, low current

Lockable Cover - Providing security and assurance, Viking has provided a lock cover to secure unwanted access to the gate operator. Each lock cover comes with a key designed and provided by Viking Access Systems.

Adjustable Positive Stop for Precision

Protection - The Viking G5 Swing Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that that chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

Field Service Repairable - Viking makes repairing an operator as simple as possible. Throwing away an operator after the warranty expires is a thing of the past. Parts can be replaced and repaired onsite, saving time and money for the end user.

Break Away Joint - The Viking Break Away Joint prevents the whole gate operator from obtaining damage beyond repair. If there is a light impact to the gate, the joint will split in two, thus protecting the primary gear drive.*

*WARNING! Sever impact or opposing force can damage other internal parts.

The Viking G-5™, leads the industry in linear actuator swing gate operators. This new design boasts a maximum gate capacity of 2000 lbs and 100% duty cycle operation, making it unlike any other. Featuring a convenient electronic manual release switch and pre-wired for easy and quick installation. The G-5™ is now powered by the V-Flex control board, including a speed control dial and diagnostic LCD display. This new design is solar efficient and ready to be powered with low voltage wiring, allowing versatility of installations. The G-5™ offers an increased 3 year commercial or 4 year residential warranty, along with ETL and UL compliance.

FEATURES:

• MAX GATE CAPACITY
  2000 lbs/10' or 800 lbs/18'
• This is the maximum amount of weight and length that the gate operator model can push/pull.

• MAX OPERATING SPEED
  15 - 18 Seconds per 90°
• Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

• MAX DUTY CYCLE
  100% Continuous Cycle
• 100% duty cycle means that you can run your operator 24/7 with absolute confidence.

• OPERATING TEMP
  -20°F up to 160°F
• The Viking gate Operator will continue to function within this temperature range.

• WARRANTY
  3 Yr Commercial / 4 Yr Residential
• Please refer to manufactuer for Warranty Policy information.

• STRIKE PROTECTION
  10,000 Amps / 20,000 Volts
• Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Single Swing G5S Solar Gate Operator (Viking G5S)

Max Gate Capacity 1000 lbs/16'

Residential & Commercial DC motor equivalent to 1/2 HP AC motor

LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.

High Efficiency Motor - Viking Access Systems has designed a unique high efficiency motor that features built-in high torque, high temperature, and is 100% continuous duty. While meeting the exact requirements needed to open and close your gate, Viking surpasses in engineering.

• Water resistant motor
• High torque, low current

Lockable Cover - Providing security and assurance, Viking has provided a lock cover to secure unwanted access to the gate operator. Each lock cover comes with a key designed and provided by Viking Access Systems.

Protection - The Viking G5S Swing Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that that chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

Surge Protection

A true milestone among all gate operators. Although it only requires one 12V battery and one 12V solar panel, the G5S is still a 24VDC motor. This gives you the flexibility of gate length and size for your solar application and allows the G5S a max capacity of 1,000 pounds. Going green has never been easier, weather you are looking for a new opener at your home or ranch, the Viking G5S solar is the best option. This operator comes with a 4 year residential warranty, one of the longest ever offered for a linear arm actuator.

FEATURES:

• MAX GATE CAPACITY
  1000 lbs/16'
• This is the maximum amount of weight and length that the gate operator model can push/pull.

• MAX OPERATING SPEED
  14 - 16 Seconds per 90°
• Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

• SOLAR POWER SUPPLY
  12 VDC
• This is the power voltage needed for the gate operator to function

• OPERATING TEMP
  -20°F up to 160°F
• The Viking gate Operator will continue to function within this temperature range.

To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Single Swing R6 Gate Operator (Viking R6)

Max Gate Capacity 700 lbs/14'
Residential DC motor equivalent to 1/3 HP AC motor

Quick Release Handle - Viking's Quick Release Handle is ready for any situation. In the event where a gate needs to be open/closed manually, such as power loss, Viking makes it easy and accessible.

V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.

• Diagnostic, Voltages, Settings, and Status Display
• Conveniently labeled enclosure
• Ergonomically located

LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.

Battery Back-up - Viking's integrated true battery back up system gives you piece of mind, in case of a power loss. Batteries are charged to full capacity and once complete it will automatically stop charging, thus ensuring longer lasting battery life.

The R-6™ Residential Swing Gate Operator, features the V-Flex control board with on-board diagnostics LCD display and new chassis design providing easy viewing of the controls. The R-6™ is also equipped with a built in heater; an on board temperature management system and allows for an increased gate capacity of up to 700 lbs, making it a great option for heavy ornamental gates. Viking’s integrated true battery backup system, convenient fuse access and LED status indicators for incoming high voltage making this the operator of choice for a home owners swing gate application. The R-6™ Swing Gate Operator has a 5 Year residential warranty.

FEATURES:

• MAX GATE CAPACITY
  700 lbs/ 14'
  This is the maximum amount of weight and length that the gate operator model can push/pull.

• MAX OPERATING SPEED
  13 - 16 Seconds per 90°
  Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

• UL CLASSIFICATION
  Class 1 Residential Only
  Operator meets the most current and up to date safety standards.

• OPERATING TEMP
  -20°F up to 160°F
  The Viking gate Operator will continue to function within this temperature range.

• WARRANTY
  5 Yr Residential
  Please refer to manufacturer's Warranty Policy for more information.

• STRIKE PROTECTION
  10,000 Amps / 20,000 Volts
  Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Single Swing R6S Solar Gate Operator (Viking R6S)

Max Gate Capacity 700 lbs/ 14'

Residential DC motor equivalent to 1/3 HP AC motor

Quick Release Handle - Viking's Quick Release Handle is ready for any situation. In the event where a gate needs to be open/closed manually, such as power loss, Viking makes it easy and accessible.

V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.

• Diagnostic, Voltages, Settings, and Status Display
• Conveniently labeled enclosure
• Ergonomically located

LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.

Built-in Solar Regulator

The R-6™ Solar Swing Gate Operator is perfect for applications where A/C power is not available or economical. The controller has its very own 12 volt power management system to use its solar regulators to its fullest potential. The V-Flex Solar will allow for soft stop and soft start for smooth and accurate operation. The chassis comes with spacious room, enough to fit a 35 amp hour battery without the need to purchase a separate enclosure.

FEATURES

• MAX GATE CAPACITY
  700 lbs/ 14'
  This is the maximum amount of weight and length that the gate operator model can push/pull.

• MAX OPERATING SPEED
  13 - 16 Seconds per 90°
  Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

• SOLAR POWER SUPPLY
  12 VDC
  This is the power voltage needed for the gate operator to function.
• OPERATING TEMP
  0°F up to 160°F
  The Viking gate Operator will continue to function within this temperature range.

• WARRANTY
  5 Yr Residential
  Please refer to manufacturer's Warranty Policy for more information.

• STRIKE PROTECTION
  10,000 Amps / 20,000 Volts
  Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Viking Single Swing T21 Gate Operator (Viking T21)

Max Gate Capacity 2000 lbs/ 12' or 1200 lbs/ 20' Residential & Commercial DC motor equivalent to 1 HP AC motor

V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.

• Diagnostic, Voltages, Settings, and Status Display
• Conveniently labeled enclosure
• Ergonomically located

LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.

Multi-layer Corrosion Protection - Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

• G90 Galvanized
• Clear Zinc Plating
• UV Rated Powder coating
• 1/4" Steel Chassi

Removable Power Supply - Created for convenience, the Patented Viking Removable Power Box can be pulled out from Viking's Gate Operator and mounted near a high voltage line, allowing you to run 24 volts to the opener. This eliminates the need of trenching for high voltage lines and permit fees.

• ​Convenient fuse access
• LED status indicators
• Convenient power switch
• E-Z access power outlet
• E-Z set-up 120V/240V
• Includes low voltage option

The T-21™ Swing Gate Operator, has a 1/4" steel chassis with multi-layer corrosion protection. This ensures reliable, long-lasting operation in the harshest of environments at your home or business. Built-in heater with thermostat control, 120/240 VAC operation, Viking’s true battery backup and smooth start / stop operation are all standard features in this operator. This powerful swing gate operator has gate capacity of up to 2000 lbs @ 12 ft. The removable power supply box includes LED indicators for your convenience and communicates to the V-Flex™ LCD screen, displaying the status of the AC line, surge protection and fuses of the operator. All Viking operators come with the most robust lightning strike protection built into every machine, offering peace of mind. The T-21™ comes with a 5 year commercial or 7 year residential warranty.

FEATURES

• MAX GATE CAPACITY
  2000 lbs/12' or 1200 lbs/20'
  This is the maximum amount of weight and length that the gate operator model can push/pull.

• MAX OPERATING SPEED
  13 - 16 Seconds per 90°
  Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

• REMOVABLE POWER BOX
  For Remote 24VDC Power Supply
  Convenient fuse access, L.E.D. status indicators, power switch, E-Z access power outlet & set-up 115V/230V.

• OPERATING TEMP
  -20°F up to 160°F
  The Viking gate Operator will continue to function within this temperature range.

• WARRANTY
  5 Yr Commercial / 7 Yr Residential
  Please refer to Manufacturer's Warranty Policy for more information.

• STRIKE PROTECTION
  10,000 Amps / 20,000 Volts
  Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Ram Swing Gate Openers:

********** The following is just a small list of some Ram swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Ram swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

Ram 30

Ram 300

Ram 302

Ram 3000

Ram 3100

Ram 3030

Ram 3200

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Ram 30 Single Swing Gate Operator (Ram 30)

SPECIFICATIONS:

• SINGLE HOME RESIDENTIAL

• MAX GATE SIZE and WEIGHT: 12 foot @ 400 lbs

• GATE TRAVELING SPEED: Approx 90 degree opening in 16 seconds

• CYCLES: 30 per hour

• SHIPPING WEIGHT: 75 lbs

• OPERATING TEMPERATURE: -10° F to 160° F

• Electric Motor: 1/2 HP, 115 VAC, 5.2 Amp, 50/60 Hz

• Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation

• Heavy Duty Torque-limiter: Absorbs high impacts on gates to minimize damage on gear reducer

• Finish: Gold/Zinc plated to inhibit corrosion

• Cover: High impact resistant charcoal grey polyethylene

• Cover Dimensions: H: 20" L: 13 1/2" W: 13 1/2"

CONTROL BOARD FEATURES:

• Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)

• Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.

• Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.

• Manual or self adjusting ERD - Settings for emergency reverse sensitivity

• Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration

• Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.

• Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.

• Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

• Open & close delays - Adds a 1 second delay on either the open or close cycle.

• Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.

• Indicator lights for troubleshooting

• Plug in loop detectors cabability

• Left/Right installation switch

To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Ram 300 Single Swing Gate Operator (Ram 300)

SPECIFICATIONS:

• RESIDENTIAL / COMMERCIAL

• MAX GATE SIZE and WEIGHT: 18 foot @ 800 lbs

• GATE TRAVELING SPEED: Approx 90 degree opening in 14 seconds

• CYCLES: Continuous

• SHIPPING WEIGHT: 110 lbs

• OPERATING TEMPERATURE: -10° F to 160° F

• Electric Motor: 1/2 HP, 115 VAC, 4.5 Amp, continuous duty with high speed ball bearings and resettable overload button

• Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation

• Heavy Duty Torque-limiter: Absorbs high impacts on gates to minimize damage on gear reducer

• Foot Pedal Release: Emergency release mechanism disengages the gate from the operator to allow easy manuel opening and closing of the gate during power outages and emergencies

• Finish: Gold/Zinc plated to inhibit corrosion

• Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door

• Cover Dimensions: H: 27" L: 16 1/2" W: 20"

CONTROL BOARD FEATURES:

• Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)

• Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.

• Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.

• Manual or self adjusting ERD - Settings for emergency reverse sensitivity

• Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration

• Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.

• Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.

• Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

• Open & close delays - Adds a 1 second delay on either the open or close cycle.

• Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.

• Indicator lights for troubleshooting

• Plug in loop detectors cabability

• Left/Right installation switch

To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Low Profile Ram 302 Single Swing Gate Operator (Ram 302)

SPECIFICATIONS:

• RESIDENTIAL / COMMERCIAL

• MAX GATE SIZE and WEIGHT: 18 foot @ 800 lbs

• GATE TRAVELING SPEED: Approx 90 degree opening in 16 seconds

• CYCLES: Continuous

• SHIPPING WEIGHT: 100 lbs

• OPERATING TEMPERATURE: -10° F to 160° F

• Electric Motor: 1/2 HP, 120 VAC, 4.5 Amp, 50/60HZ, continuous duty with high speed ball bearings and resettable overload button

• Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation

• Finish: Gold/Zinc plated to inhibit corrosion

• Cover: High impact resistant charcoal grey polyethylene

• Cover Dimensions: H: 16 1/2" L: 23 1/2" W: 13 1/2"

CONTROL BOARD FEATURES:

• Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)

• Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.

• Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.

• Manual or self adjusting ERD - Settings for emergency reverse sensitivity

• Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration

• Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.

• Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.

• Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

• Open & close delays - Adds a 1 second delay on either the open or close cycle.

• Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.

• Indicator lights for troubleshooting

• Plug in loop detectors cabability

• Left/Right installation switch

To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Ram 3000 Single Swing Gate Operator (Ram 3000)

SPECIFICATIONS:

• COMMERCIAL / INDUSTRIAL

• MAX GATE SIZE and WEIGHT: 22 foot @ 1000 lbs

• GATE TRAVELING SPEED: Approx 90 degree opening in 20 seconds

• CYCLES: Continuous

• SHIPPING WEIGHT: 150 lbs

• OPERATING TEMPERATURE: -10° F to 160° F

• Electric Motor: 1/2 HP, 115 VAC, 4.5 Amp, 50/60HZ, continuous duty with high speed ball bearings and resettable overload button

• Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation

• Limit Swiches: Mechanical adjustment for accurate gate stop settings

• Finish: Gold/Zinc plated to inhibit corrosion

• Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door

• Cover Dimensions: H: 28 1/2" L: 23" W: 18"

CONTROL BOARD FEATURES:

• Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)

• Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.

• Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.

• Manual or self adjusting ERD - Settings for emergency reverse sensitivity

• Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration

• Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.

• Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.

• Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

• Open & close delays - Adds a 1 second delay on either the open or close cycle.

• Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.

• Indicator lights for troubleshooting

• Plug in loop detectors cabability

• Left/Right installation switch

To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Ram 3100 Single Swing Gate Operator (Ram 3100)

SPECIFICATIONS:

• COMMERCIAL / INDUSTRIAL

• MAX GATE SIZE and WEIGHT: 22 foot @ 1200 lbs

• GATE TRAVELING SPEED: Approx 90 degree opening in 20 seconds

• CYCLES: Continuous

• SHIPPING WEIGHT: 150 lbs

• OPERATING TEMPERATURE: -10° F to 160° F

• Electric Motor: 3/4 HP, 115 VAC, 8.5 Amp, 50/60HZ, continuous duty with high speed ball bearings and resettable overload button

• Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation

• Limit Swiches: Mechanical adjustment for accurate gate stop settings

• Finish: Gold/Zinc plated to inhibit corrosion

• Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door

• Cover Dimensions: H: 28 1/2" L: 23" W: 18"

CONTROL BOARD FEATURES:

• Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)

• Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.

• Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.

• Manual or self adjusting ERD - Settings for emergency reverse sensitivity

• Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration

• Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.

• Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.

• Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

• Open & close delays - Adds a 1 second delay on either the open or close cycle.

• Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.

• Indicator lights for troubleshooting

• Plug in loop detectors cabability

• Left/Right installation switch

To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Ram 3030 Single Swing Gate Operator (Ram 3030)

SPECIFICATIONS:

• COMMERCIAL / INDUSTRIAL

• MAX GATE SIZE and WEIGHT: 20 foot @ 3000 lbs

• GATE TRAVELING SPEED: Approx 90 degree opening in 16 seconds

• CYCLES: Continuous

• SHIPPING WEIGHT: 200 lbs

• OPERATING TEMPERATURE: -10° F to 160° F

• Electric Motor 2 Options:
  3/4 HP, 115 VAC, 8.5 Amp, 50/60HZ
  1 HP, 230 VAC, 4.5 Amp, 50/60HZ
  continuous duty with high speed ball bearings and resettable overload button

• Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation

• Limit Swiches: Mechanical adjustment for accurate gate stop settings

• Finish: Gold/Zinc plated to inhibit corrosion

• Cover: High impact resistant charcoal grey polyethylene

• Cover Dimensions: H: 27 1/2" L: 23 1/2" W: 17 1/2"

CONTROL BOARD FEATURES:

• Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)

• Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.

• Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.

• Manual or self adjusting ERD - Settings for emergency reverse sensitivity

• Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration

• Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.

• Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.

• Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

• Open & close delays - Adds a 1 second delay on either the open or close cycle.

• Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.

• Indicator lights for troubleshooting

• Plug in loop detectors cabability

• Left/Right installation switch

To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Ram 3200 Single Swing Gate Operator (Ram 3200)

SPECIFICATIONS:

• COMMERCIAL / INDUSTRIAL

• MAX GATE SIZE and WEIGHT: 22 foot @ 1400 lbs

• GATE TRAVELING SPEED: Approx 90 degree opening in 20 seconds

• CYCLES: Continuous

• SHIPPING WEIGHT: 150 lbs

• OPERATING TEMPERATURE: -10° F to 160° F

• Electric Motor: 1 HP, 230 VAC, 4.5 Amp, 50/60HZ continuous duty with high speed ball bearings and resettable overload button

• Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation

• Limit Swiches: Mechanical adjustment for accurate gate stop settings

• Finish: Gold/Zinc plated to inhibit corrosion

• Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door

• Cover Dimensions: H: 28 1/2" L: 23" W: 18"

CONTROL BOARD FEATURES:

• Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)

• Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.

• Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.

• Manual or self adjusting ERD - Settings for emergency reverse sensitivity

• Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration

• Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.

• Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.

• Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.

• Open & close delays - Adds a 1 second delay on either the open or close cycle.

• Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.

• Indicator lights for troubleshooting

• Plug in loop detectors cabability

• Left/Right installation switch

To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

GTO Swing Gate Openers:

********** The following is just a small list of some GTO swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your GTO swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

GTO GP-SW050

GTO SW2000XL

GTO PRO-SW3000XL

GTO PRO-SW4000XL

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

GTO GP-SW050 Single Swing Gate Operator (GTO GP-SW050)

GTO GP-SW050 Single Swing Gate Operator

The GP-SW050 is designed for operation of swing gates.

Max Gate Weight 650 lbs. (295 kg)

Max Gate Length 16 ft. (4.9 m)

For bi-parting dual gates, a second operator is required.

Assumes gate to be free swinging, in good working condition, and on a level plane.

FEATURES:

• Maintenance-Free, 24V brushless DC motor 1/2 HP equivalent.
• AC Powered with inherent UPS (Uninterrupted Power System/Battery Backup) gate operation and all DC powered counters/safety devices.

MECHANICAL:

• 1200:1 direct drive worm gear with totally enclosed gear reduction.
• 100% solid-state motor controls circuitry.
• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening speed to 90 degrees from 15 seconds.
• Weatherproof high density ABS, UV resistant cover.
• Heavy Duty Steel Chassis.
• Operation, diagnostic and safety alarms.
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.

ELECTRICAL/POWER:

• Batteries are required (not included): two 12 V DC, U1 230A minimum cold crank amps wired together in series.
• On board 12 V DC power delivers 300 mA for accessories.
• 120 V AC 60 Hz built in power receptacles (1 amp rated).
• GTO’s advanced technology residential control board: — Digital/optical limits with fine adjustment JOG push buttons for easy and accurate setting of limits. — APS (Absolute Position System) tracking system. — On board 3-Push button control station.
• Visual LED and audible diagnostic indicators.
• Plug-in loop detector inputs for exit, shadow, and safety loops.
• Fail Safe or Fail Secure DIP switch selectable for low battery operation.
• 12 V DC, 300mA (.3 Amp), poly fuse protected auxiliary poweroutput.

DIMENSIONS: Height: 33 ̋ Depth: 18 ̋ Width: 15 ̋

SHIPPING WEIGHT: 125 lbs. (57 kg)

WARRANTY: 7 Year Mechanical; 5 Year Electrical (RESIDENTIAL application)

CLASS OF OPERATION: Class I, II, III, IV

SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.

DUAL GATE APPLICATIONS: For dual gate applications, a second operator is required. The GP-SW050 is dual gate capable via communication link wires (22 AWG Type 8761 Belden wire).

To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

GTO PRO-SW2000XL Single Swing Gate Operator (GTO PRO-SW2000XL)

GTO PRO-SW2000XL Single Swing Gate Operator

The PRO-SW2000XL will operate a gate up to 16 ft. (4.9 m) long or weighing 500 lbs. (226.8 kg) per leaf if all proper installation procedures have been followed. Ball bearing hinges should be used on all gates weighing over 250 lbs. (113.4 kg).

FEATURES:

• One button auto-memorization of digital transmitter code.
• Includes battery backup
• 318 MHz RF radio receiver
• Entry transmitter
• AC transformer and all necessary mounting hardware for a post mounted installation
• 8 ̋ (25.4 cm) total offset.

MECHANICAL:

• The GTO/PRO® control board can be programmed for pull-to-open or push-to-open.
• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: From 18 to 20 seconds.
• Range of arm stroke: is up to 13 ̋ (33 cm).
• Operator length: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point.
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.

ELECTRICAL/POWER:

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input and 18V AC at 40 VA. output, transformer rectified to 14V DC through control board
• Powered by a reliable 12 Volt (120 Watt) DC motor
• 16:1 planetary gear drive system.
• Charging regulated circuit on control board. “Sleep draw” is 15 mA; “active draw” is 2 to 5 amps.

SHIPPING WEIGHT: 2000XL Kit 31 lbs. (14 kg); 2002XL Kit 52 lbs. (24 kg); Meets UPS shipping standards.

WARRANTY: 2 Year (RESIDENTIAL application)

CLASS OF OPERATION: Class I, II, III, IV

SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.

OPTIONS:

• Solar Power: For dual gates, we recommend a minimum of 10 watts. (FM123) 10-watt Solar Panel Charger: float voltage 14.5 V DC output from a 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
• Dual Gates: The PRO-SW2002XL Kit contains both the master arm and second operator arm with a 32 ft. (9.8m) power cable for a dual gate application.
• Push to Open applications: require one Push-to-Open bracket (349IH) per operator.

To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

GTO PRO-SW3000XL Single Swing Gate Operator (GTO PRO-SW3000XL)

GTO PRO-SW3000XL Single Swing Gate Operator

PRO-SW3000XLSWING GATE OPERATORPRO-SW3000XL-LCBLARGE SMART CONTROL BOX KITThis option comes with a large control box (19 ̋ x 18.25 ̋ x 8.25 ̋/48 cm x 46 cm x 21 cm) that provides room necessary for a large automotive or marine battery.

The PRO-SW3000XL/3200XL series will operate a gate up to 16 ft. (4.9 m) long and weighing 650 lbs. (294.8 kg) each leaf if all proper installation procedures have been followed. Ball bearing hin-ges should be used on all gates weighing over 250 lbs. (113.4 kg).

FEATURES:

• One button auto-memorization of digital transmitter code.
• Includes battery backup
• 318 MHz radio receiver
• Entry transmitter
• AC transformer and all necessary mounting hardware for a post mounted installation
• 12 ̋ (30.5 cm) total offset.

MECHANICAL:

• The GTO/PRO® control board can be programmed for pull-to-open or push-to-open.
• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: From 18 to 20 seconds.
• Range of arm stroke: is up to 16 ̋ (41 cm).
• Operator length: with arm fully retracted is 40.25 ̋ (102 cm), mounting point to mounting point.
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.

ELECTRICAL/POWER:

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input and 18V AC at 40 VA. output, transformer rectified to 14V DC through control board
• Powered by a reliable 12 Volt (120 Watt) DC motor
• 16:1 planetary gear drive system.
• Charging regulated circuit on control board. “Sleep draw” is 15 mA; “active draw” is 3 to 7 amps.

SHIPPING WEIGHT: 3000XL Kit 39 lbs. (18 kg); 3200XL 28 lbs. (13 kg); 3000XL w/ LCB 30 lbs + 28 lbs. (14 kg + 12 kg) Meets UPS shipping standards.

WARRANTY: 2 Year (RESIDENTIAL application)

CLASS OF OPERATION: Class I, II, III, IV

SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.

OPTIONS:

• Solar Power: For dual gates, we recommend a minimum of 10 watts. (FM123) 10-watt Solar Panel Charger: float voltage 14.5 V DC output from a 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
• Dual Gates: The PRO-SW3200XL works as a second gate operator when combined with a PRO-SW3000XL. Includes 40 ft. (12.2m) power cable.
• Push to Open applications: require one Push-to-Open bracket (R4388) per operator

To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

GTO PRO-SW4000XL Single Swing Gate Operator (GTO PRO-SW4000XL)

GTO PRO-SW4000XL Single Swing Gate Operator

The PRO-SW4000XL/4200XL series will operate a gate up to 16 ft. (4.9 m) long and weighing 650 lbs. (294.8 kg) each leaf if all proper installation procedures have been followed. Adding the op-tional HB4000 Bracket Set will allow the operation of a gate up to 20 ft. (6.1 m) long and weighing 1000 lbs. (453 kg) each leaf.

FEATURES:

• One button auto-memorization of digital transmitter code.
• Includes battery backup
• 318 MHz RF radio receiver
• Entry transmitter
• AC transformer and all necessary mounting hardware for a post mounted installation
• 17 ̋ (43 cm) total offset.

MECHANICAL:

• The GTO/PRO® control board can be programmed for pull-to-open or push-to-open.
• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: from 15 to 18 seconds.
• Range of arm stroke: is up to 22 ̋ (56 cm).
• Operator length: with arm fully retracted is 46.25 ̋ (118 cm),mounting point to mounting point.
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.

ELECTRICAL/POWER:

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input and 18VAC at 40 VA. output, transformer.
• Powered by a reliable 12 Volt (120 Watt) DC motor
• 16:1 planetarygear drive system.
• Charging regulator circuit on control board. “Sleep draw” is 15mA; “active draw” is 5 to 9 amps.

SHIPPING WEIGHT: 4000XL Kit 38 lbs. (21 kg); 4200XL 31 lbs. (16 kg); Meets UPS shipping standards.

WARRANTY: 2 Year (RESIDENTIAL application)

CLASS OF OPERATION: Class I

SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.

OPTIONS:

• For Larger/Longer Gates (up to 20 ft. and 1000 lbs.):Use Post Mount Hardware Kit (HB4000 Bracket Set). Solar Power: For dual gates, we recommend a minimum of 10 watts. (FM123) 10-watt Solar Panel Charger: float voltage 14.5 V DC output from a 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
• Dual Gates: The PRO-SW4200XL works as a second gate operator when combined with a PRO-SW4000XL. Includes 50 ft. (15.2m) power cable.
• Push to Open applications: require one Push-to-Open bracket per operator. R4388 for PRO-SW4000XL; R4KPTO for PRO-SW4000XL when using HB4000 bracket set for longer, heavier gates.

To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Linear Swing Gate Openers:

********** The following is just a small list of some Linear swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Linear swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

Linear PRO-SW2000XLS

Linear PRO-SW3000XLS

Linear PRO-SW4000XLS

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Linear PRO-SW2000XLS Single Swing Gate Operator (Linear PRO-SW2000XLS)

Linear PRO-SW2000XLS Single Swing Gate Operator

VOLTS: 12 Volts

Max. Gate Length: 16 feet

Max Gate Weight: 500 lbs

Gate Speed: 15-20 seconds

Common Key Features

• Dual sense technology:- Cost efficient: no need for additional entrapment protection devices
• Quick install: no electrician/welder or photo beams required
• UL 325 compliant
• Easy transmitter programming with the touch of a button
• Soft start / soft stop
• 2-year warranty (residential applications only)
• Solar Compatible
• Includes battery backup
• 318 MHz RF radio receiver
• Entry transmitter
• AC transformer and all necessary mounting hardware

COMMON ELECTRICAL FEATURES

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input, 18V AC, 40 VA. output, transformer regulated to 14V DC through control board
• Powered by a reliable 12 Volt (120 Watt) DC motor
• 16:1 planetary gear drive system
• “Sleep draw” is 15 mA

COMMON ENGINEERING FEATURES

• Front mount and scraper seal design
• Rev-counter board with reed switch technology
• Reinstated heavy duty hardware for 1000lb-20 ft gates
• The control board can be programmed for pull-to-open or push-to-open
• Operating temp -5 F (-21C) to +160 F (71 C)
• Opening time: From 15 to 20 seconds
• Range of arm stroke: is up to 15 ̋(33 cm)
• Operator length for 4000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operator length for 3000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operator length for 2000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing
• Soft start/soft stop—for long mechanical life expectancy
• Auto close adjustable 3–120 seconds delay

To get on our schedule for your Linear gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Linear PRO-SW3000XLS Single Swing Gate Operator (Linear PRO-SW3000XLS)

Linear PRO-SW3000XLS Single Swing Gate Operator

VOLTS: 12 Volts

Max. Gate Length: 16 feet

Max Gate Weight: 650 lbs

Gate Speed: 15-18 seconds

Common Key Features

• Dual sense technology:- Cost efficient: no need for additional entrapment protection devices
• Quick install: no electrician/welder or photo beams required
• UL 325 compliant
• Easy transmitter programming with the touch of a button
• Soft start / soft stop
• 2-year warranty (residential applications only)
• Solar Compatible
• Includes battery backup
• 318 MHz RF radio receiver
• Entry transmitter
• AC transformer and all necessary mounting hardware

COMMON ELECTRICAL FEATURES

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input, 18V AC, 40 VA. output, transformer regulated to 14V DC through control board
• Powered by a reliable 12 Volt (120 Watt) DC motor
• 16:1 planetary gear drive system
• “Sleep draw” is 15 mA

COMMON ENGINEERING FEATURES

• Front mount and scraper seal design
• Rev-counter board with reed switch technology
• Reinstated heavy duty hardware for 1000lb-20 ft gates
• The control board can be programmed for pull-to-open or push-to-open
• Operating temp -5 F (-21C) to +160 F (71 C)
• Opening time: From 15 to 20 seconds
• Range of arm stroke: is up to 15 ̋(33 cm)
• Operator length for 4000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operator length for 3000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operator length for 2000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing
• Soft start/soft stop—for long mechanical life expectancy
• Auto close adjustable 3–120 seconds delay

To get on our schedule for your Linear gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Swing Gate Opener Repair - Keller Texas

817-590-8008

Linear PRO-SW4000XLS Single Swing Gate Operator (Linear PRO-SW4000XLS)

Linear PRO-SW4000XLS Single Swing Gate Operator

VOLTS: 12 Volts

Max. Gate Length: 20 feet

Max Gate Weight: 1000 lbs

Gate Speed: 18-20 seconds

Common Key Features

• Dual sense technology:- Cost efficient: no need for additional entrapment protection devices
• Quick install: no electrician/welder or photo beams required
• UL 325 compliant
• Easy transmitter programming with the touch of a button
• Soft start / soft stop
• 2-year warranty (residential applications only)
• Solar Compatible
• Includes battery backup
• 318 MHz RF radio receiver
• Entry transmitter
• AC transformer and all necessary mounting hardware

COMMON ELECTRICAL FEATURES

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input, 18V AC, 40 VA. output, transformer regulated to 14V DC through control board
• Powered by a reliable 12 Volt (120 Watt) DC motor
• 16:1 planetary gear drive system
• “Sleep draw” is 15 mA

COMMON ENGINEERING FEATURES

• Front mount and scraper seal design
• Rev-counter board with reed switch technology
• Reinstated heavy duty hardware for 1000lb-20 ft gates
• The control board can be programmed for pull-to-open or push-to-open
• Operating temp -5 F (-21C) to +160 F (71 C)
• Opening time: From 15 to 20 seconds
• Range of arm stroke: is up to 15 ̋(33 cm)
• Operator length for 4000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operator length for 3000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operator length for 2000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing
• Soft start/soft stop—for long mechanical life expectancy
• Auto close adjustable 3–120 seconds delay

To get on our schedule for your Linear gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Access Controls

Multi Tennant Call Boxes and Telephone Entry Systems and Commercial Keypad Entry Devices:

********** The following is just a small list of some multi tennant call boxes and commercial keypad entry devices we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. Just give us a call to schedule a technician out to your location. To get on our schedule for your gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********

Liftmaster

Linear

DoorKing

************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Gate Opener Remote Controls and Keypads:

**** The following is just a small list of some controls, and accessories we replace and install, there are many more different solutions for the many different gate opener configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate opener and setup.

Radio Recievers

Remotes

Keypads

To get on our schedule for your Gate Opener Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster 312HM Universal Coaxial Receiver (312HM)

Liftmaster 312HM Universal Coaxial Receiver with Security+®

312HM – 315 MHz

• External 8" whip antenna included.
• Security+® rolling code and/or DIP switch compatibility
• 12VDC or 18 - 35VAC/DC jumper selectable
• Momentary or constant contact, jumper selection
• 2-piece aluminum case with detachable cover
• High security memory stores up to 15 Security+® remote control or keyless entry codes
• Normal security memory stores up to 31 LiftMaster® remote control codes of any type
• FCC certified 315MHz

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster 412HM Universal Coaxial Receiver (412HM)

Liftmaster 412HM Universal Coaxial Receiver with Security+®

390 MHz

• External 8" whip antenna included.
• Security+® rolling code and/or DIP switch compatibility
• 12VDC or 18 - 35VAC/DC jumper selectable
• Momentary or constant contact, jumper selection
• 2-piece aluminum case with detachable cover
• High security memory stores up to 15 Security+® remote control or keyless entry codes
• Normal security memory stores up to 31 LiftMaster® remote control codes of any type
• FCC certified 315MHz

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Liftmaster STAR 450 Commercial Universal Receiver (STAR450)

Liftmaster STAR 450 Commercial Universal Receiver

315 MHz or 390 MHz (Specify with order)

• For gate and commercial door operators
• Compact size; easy to program
• Reduces installation time; compact design fits inside most gate operators
• Universal receiver with antenna
• Rapid Learn® feature programs multiple transmitters in just seconds
• User-friendly programming technology makes it easy to add, block and delete up to 450 transmitters individually
• Ideal for gated communities, parking lots and garages
• Compatible with Chamberlain® Security+®, billion code and keyless entry technologies
• Duplicate memory module may be removed for programming additional receivers or for safe backup storage

To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster Universal Remote Control (375LM)

LiftMaster Premium Remote Control

To get on our schedule for your Liftmaster Remote Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster 377LM Wireless Keyless Entry System (377LM)

LiftMaster 377LM Wireless Keyless Entry System

To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*****************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

LiftMaster 387LM Wireless Keyless Entry System (387LM)

LiftMaster 387LM Wireless Keyless Entry System

Universal Keyless Entry

• Designed to work with a variety of brands of garage door openers
• Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
• Wireless – powered by one 9V battery (included)
• Weatherproof, slide-up protective cover
• Backlit keypad

To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

**************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Heddolf 318 Mhz frequency Wireless Keypad (P330-1KA)

Heddolf P330-1KA

Heddolf 318 Mhz frequency Wireless Keypad

Model: P330-1KA

• Heddolf 318 MHz Gate or Garage Door Opener Wireless Keypad Size : 6’ x 3 3/8’ x 2’
• Holds up to 60 individual 4-digit user code Plus the master code.
• User friendly coding
• Back lit keypad
• Weather Proof Encolsure
• Can be hardwired and/or wireless
• Designed to mount on gooseneck post or wall
• Compatible with the Allstar, Pulsa receivers
• Stainless steel faceplate
• Polycarbonate housing
• With dip switches for easy programming

To get on our schedule for your Gate Opener Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

**************

S.O.S Gate Opener Repair - Keller Texas

817-590-8008

Linear 2022: Multi Double (2011)

Linear 2022: Multi Double

The Model 2022 Multi Double is a Multi-Code transmitter and receiver set. The set contains two Model 308911 1-Channel Visor Transmitters and one Model 109020 1-Channel Receiver.

FEATURES

• Compatible with all Multi-Code radio controls
• Transmitters supplied with visor clip
• Transmitters powered by 9-volt battery
• Three terminal 24-volt receiver connects directly to operator
• 1,024 codes
• RF frequency: 300 MHz
• 3" W x 5.5" H x 1.5" D (receiver)
• 2.5" W x 3.75" H x 0.875" D (transmitters)

To get on our schedule for your Gate Opener Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Automatic Gate Opener Repair - Keller Texas

817-590-8008

***********