Solar Gate Opener Repair

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Liftmaster Solar Sliding Gate Openers:

**** The following is just a list of just some of the Liftmaster solar sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Liftmaster solar sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

Liftmaster RSL12UL

Liftmaster CSL24UL

Liftmaster RSL12U

Liftmaster CSL24U

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster RSL12UL 12VDC Slide Gate Operator (RSL12UL 12VDC)

LiftMaster RSL12UL Slide Gate Operator

RSL12UL features battery backup that provides up to 114 cycles or 63 days of standby power.

Reliable

• Solar-Ready, Ultra-Reliable System delivers power when and where you need it.
• Battery Backup provides seamless access by providing standby power when the power is down.
• Smooth Start/Stop Operation and mid-travel reversal extend operator hardware life.
• Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Warranty 3 years.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Posilock® prevents gate from an unauthorized manual open.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Manual Disconnect when unlocked allows gate to be opened manually.
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories

• LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile Resistive Edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Power

• 115VAC
• Solar-Ready, Ultra-reliable System delivers power when and where you need it
• Accessory Power: 12VDC 500mA output

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: 1-piece UV-resistant polyethylene cover
• UL® Usage Classification: I, II, III and IV
• Operator Weight: 100 Lbs.

Dimensions

• Height: 23.30”
• Width: 16.24”
• Depth: 16.76”

Temperature Specifications

• Without Heater: -4°F (-20°C) to 140°F (60°C)
• With Optional Heater: (HTR) -40°F (-40°C) to 140°F (60°C)

Gate Travel Speed

• 10” per second

Standard Features

• Synchronized Close simultaneously closes gates
• Quick Close and Anti-Tailgate Quickly secure property, preventing unauthorized access (requires expansion board)
• Inherent Reversing Sensor Detects obstructions and reverses gate when closing or stops/reverses
• Monitored Safety Inputs 3 main board, 3 optional expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

RECOMMENDED CAPACITIES

• Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster CSL24UL Slide Gate Operator (CSL24UL)

LiftMaster CSL24UL Slide Gate Operator

CSL24UL features a battery backup that provides up to 208 cycles or 24 days of standby power.

Reliable

• Battery Backup provides seamless access by providing standby power when the power is down.
• Commercial Gear-Driven Transmission provides unsurpassed reliability.
• Smooth start/stop operation and mid-travel reversal extend operator hardware life.
• Warranty 5 years commercial, 7 years residential.

Smart

• MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
• Wireless Dual-Gate Communication synchronizes gate opening/closing and eliminates expensive driveway trenching costs.

Safe and Secure

• Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
• Quick Close and Anti-Tailgate quickly secures the property, preventing unauthorized access.
• Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
• Manual Disconnect when unlocked allows gate to be opened manually.
• UL® Listed gate operators with monitored safety entrapment protection devices.

Included Accessories

• LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
• S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.

Mechanics

• 24VDC Continuous duty
• Operator Duty Rating: high-cycle, high-temperature continuous duty
• Wormgear Reduction: Commercial oil-bath gearbox provides 10:1 Wormgear reduction
• Chain: #41 Black Oxide (30ft. Supplied)

Power

• 120/230V single-phase
• Optional Kit (3PHCONV) to convert an input voltage of 208/230/460/575VAC to an output voltage of 120VAC
• Solar-Ready Ultra-Reliable System delivers power when and where you need it
• Accessory Power: 24VDC 500mA output; switched and un-switched power

Commercial Grade Design

• Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
• Cover: high-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance
• UL® Usage Classification: I, II, III, and IV
• Operator Weight: 140 lbs.

Dimensions

• Height: 25.07”
• Width: 15.55”
• Depth: 19.51”

Temperature Specifications When Cold:

• Without heater: -4°F (-20°C)
• With heater: (HTR) -40°F (-40°C)

Temperature Specifications When Hot:

• Without heater: 140°F (60°C)
• With heater: (HTR) 140°F (60°C)

Gate Speed

• 12” per second

Standard Features:

• Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses gate when opening
• Posilock® automatically closes the gate when it is pushed from the closed limit
• Monitored Safety Inputs 3 main board, 3 expansion board
• Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
• Led Diagnostic Display simplifies installation and troubleshooting
• Programmable Auxiliary Relays make adding additional features easy
• Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster RSL12U 12VDC Slide Gate Operator (RSL12U 12VDC)

LiftMaster RSL12U 12VDC Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE RSL12UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
• Synchronized Close Simultaneously closes gates.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK ® Compatible Version 4 and higher.
• Security+ 2.0® On-Board Radio Reciever Up to 50 remote controls (unlimited with 811LM/813LM).
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop and Mid-Travel Reversal Extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Lockable Manual Disconnect When unlocked allows gate to be operated manually.
• Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion.
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 12VDC or solar powered.
• Accessory Power 12VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
• Temperature Specifications
• Without Heater: -4°F (-20°C) to 140°F (60°C).
• With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 10 in. per second.

Construction

• P3 Motor 12VDC continuous-duty motor.
• Operator Duty Rating 120 cycles per day.
• Chassis Constructed with 1/4 in. gold-zinc plated steel for rust prevention.
• Worm Gear Reduction Commercial oil bath gearbox with 12:1 worm gear reduction.
• Cover 1-piece UV-resistant polyethylene cover.
• Operator Weight 100lbs.

RECOMMENDED CAPACITIES

• Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster CSL24U 24VDC Slide Gate Operator (CSL24U 24VDC)

LiftMaster CSL24U 24VDC Slide Gate Operator

THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE CSL24UL

Unrivaled Performance, Safety and Accessibility

Exclusively LiftMaster:

Battery Backup

• Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.

Security+2.0®

• Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.

MyQ®

• Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.

P3 Motors

• LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.

Features

• LED Diagnostic Display Simplifies installation and troubleshooting.
• Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
• Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
• POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
• Pre-Motions Warning Alarm Activates onboard alarm three seconds prior to gate motion.
• Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
• Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
• HOMELINK®Compatible Version 4 and higher.
• SECURITY+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
• Engineered For More Than 1 Million Cycles, Our P3 Motor is designed to perform in the most demanding environments.
• Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
• Soft Start/Stop Extends operator and hardware life in high-cycle and heavy-gate applications.
• Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
• Keyed Manual Disconnect When unlocked allows gate to be operated manually.
• Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion
• Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
• Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.

Specifications

• Power 120V/230V Single Phase.
• Accessory Power 24VDC 500mA output. Switched and unswitched power.
• Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
• Temperature Specifications
• Without Heater: 4°F (-20°C) to 140°F (60°C).
• With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
• UL Usage Classification I, II, III, and IV.
• Gate Travel Speed 12 in. per second.

Construction

• P3 Motor® 24VDC continuous-duty motor.
• Operator Duty Rating High-cycle, high-temperature continuous duty.
• CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
• Worm Gear Reduction Commercial oil bath gearbox providing 10:1 worm gear reduction.
• Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
• Operator Weight 140 lbs.

RECOMMENDED CAPACITIES

• Rated for gates up to 50 ft. in length or weighing up to 1,500 lbs.

To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Viking Solar Sliding Gate Openers:

**** The following is just a list of just some of the Viking solar sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Viking solar sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

Viking K2S Solar

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Viking K2S Solar Slide Gate Operator (K2S Solar)

Viking K2S Solar Slide Gate Operator

Max Gate Capacity

• 700 lbs/30'

Residential DC motor

• equivalent to 1/3 HP AC motor

V-Flex Control Board

• This control board is universal across the Viking DC & Solar Gate Operator line.
• Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
• Diagnostic, Voltages, Settings, and Status Display
• Conveniently labeled enclosure
• Ergonomically located
• LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.

Corrosion Protection

Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.

• G90 Galvanized
• Clear Zinc Plating
• UV Rated Powder Coating
• 1/4" Steel Chassis
• Large Space for Battery

The K-2™ Solar Slide Gate Operator can be used for gates up to 700 lbs and 30 ft long. The controller has its very own power management system to use its solar regulator to its fullest potential. The V-Flex Solar will allow for soft stop and soft start for smooth and accurate operation. Homeowners and installers alike have found great success with Viking's solar K-2 model.

Features:

MAX GATE CAPACITY

• 700 lbs/30' - This is the maximum amount of weight and length that the gate operator model can push/pull.

MAX OPERATING SPEED

• 12" Per Seconds - Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.

SOLAR POWER SUPPLY

• 12 VDC - This is the power voltage needed for the gate operator to function

OPERATING TEMP

• 0°F up to 160°F - The Viking gate Operator will continue to function within this temperature range.

WARRANTY

• 5 Yr Residential - Please refer to manufactuerer's Warranty Policy for more information.

STRIKE PROTECTION

• 10,000 Amps / 20,000 Volts - Leading the industry with the best in-unit lightning and surge protection.

To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

All-O-Matic Solar Sliding Gate Openers:

**** The following is just a list of just some of the All-O-Matic solar sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your All-O-Matic solar sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

All-O-Matic SL-100 DC

All-O-Matic SL-100FP_DC

All-O-Matic SL-45 DC

All-O-Matic SL-90_DC

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

All-O-Matic SL-100 DC Slide Gate Operator (SL-100 DC)

All-O-Matic SL-100 DC Slide Gate Operator

Designed to be the strongest, most durable DC gate operator in its class, the SL-100DC is sure to fit the needs of most residential and commercial gate installation. Setting a new standard in slide gate operators, SL-100DC can move gates that are up to 2,000 lbs. and 45 feet wide. Just like our AC Slider 100 we now offer an optional emergency foot pedal release.

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.

Specs

• Warranty 7 year Residential/ 5 Year Commercial
• Motor 24 VDC Brushless 1/2 HP Motor
• Maximum Gate Weight 2,000 lbs
• Maximum Gate Length 45 Feet
• Power Options 115/230 VAC Single Phase and 12/24 VDC Solar Panel
• Duty Cycle Continous Cycle
• Gear Box Ratio 10:1
• Width 12"
• Length 17.5"
• Height 23.5
• Gate Travel Speed 12 inches per second
• Operator Weight 130 lbs
• Cover Rotationally Molded – Indestructible
• Emergency Release Options Optional: Mechanical Foot pedal Release
• Battery Backup Integrated, with Two 7 Ah Batteries 12VDC
• Battery Backup Capacity Integrated with two 7AH batteries 12VDC
• Solar Capabilities 12VDC or 24VDC Solar Panel Input
• Belt Size 4L-300
• Main Sproket Size 41B22X7/8
• Limit Shaft Sprocket N/A
• Breaker Requirement 20 Amp Dedicated Breaker
• Temperature Range -40 to 160°

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

All-O-Matic SL-100FP DC Slide Gate Operator (SL-100FP DC)

All-O-Matic SL-100FP DC Slide Gate Operator

Designed to be the strongest, most durable DC gate Operator in its class. Allomatic’s long awaited SL-100FP DC has arrived. The SL-100FP DC gate operator utilizes an industry first brush less motor technology (no maintenance, high torque, and smooth quiet operation), total in house design, programming and construction. Equipped with a built in loop detector rack and enough power to operate all accessories on battery power. Manufactured with a heavy duty frame and parts that are made to last a life time, plus our industry leading warranty.

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brush less DC motors are smooth and quiet but are powerful and durable and require zero maintenance. As with most of our AC operators, our DC operators now include an emergency foot pedal release and a built in loop rack.

Specs

• Warranty Full 7 Year Residential, 5 Year Commercial
• Motor 24 VDC Brushless 1/2 HP Motor
• Maximum Gate Weight 2,000 lbs.
• Maximum Gate Length 45 Feet
• Power Options 115/230 VAC Single Phase and 12/24 VDC Solar Panel
• Duty Cycle Continous Cycle
• Gear Box Ratio 30:1
• Length 12"
• Height 17.5"
• Gate Speed 12 inches per second
• Weight 130 lbs
• Emergency Release Options Optional: Mechanical Foot Pedal
• Battery Back Up Integrated, with Two 7 Ah Batteries 12VDC
• Battery Back Up Capacity Up to 80 Cycles on a 1,000 lbs Gate
• Solar Capabilities 12VDC or 24VDC Solar Panel Imput
• Belt Size Reg: 4L-300 Foot Pedal: 4L-260
• Main Sprocket Size 41B22X7/8
• Limit Shaft Sprocket 41B15X5/8
• Breaker Requirement 20 Amp Dedicated Breaker
• Temperature Range -40 to 160°

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

All-O-Matic SL-45 DC Slide Gate Operator (SL-45 DC)

All-O-Matic SL-45 DC Slide Gate Operator

The SL-45 DC is the smallest most efficient and reliable residential DC gate operator in the industry. The SL-45 DC is small in size but enormous in performance. It's top of the line Planetary gearbox and Brushless DC Motor carries a tremendous advantage over the conventional gearboxes and brushed DC motor commonly used in the industry due to its compact size and its outstanding power transmission efficiency.

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.

Specs

• Warranty 5 Year Residential
• Motor 24 VDC Brushless Motor - Continuous Duty Cycle
• Duty Cycle Continous
• Power Options 120/220 VAC Single Phase
• Gear Box Ratio 28.93:1 Planetary Gearbox High Efficiency
• Cover Rotationally Molded – Indestructible
• Dimensions W: 11" – L: 14.5" – H 15.5"
• Maximum Gate Length 30 Feet
• Maximum Gate Weight 800 Lbs
• Gate Travel Speed 12 inches per sec
• Operator Weight 50 lbs
• Emergency Release Options Can be pushed open in the event of a power failure
• Battery Backup Integrated, Capable of up to 250 cycles on a 600lbs Gate Battery: Two 8 Ah Batteries 12VDC
• Solar Capabilities 12VDC or 24VDC Solar Panel Input

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

All-O-Matic SL-90 DC Slide Gate Operator (SL-90 DC)

All-O-Matic SL-90 DC Slide Gate Operator

The newly redesigned SL-90DC, Gate Operator, is equipped with a standard mechanical foot pedal release and larger gearbox with internal disconnect for higher gate capacity. Same compact size but it can now handle gates up to 1,600 lbs. and 50 feet long

DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. Â The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.

Specs

• Warranty Full 7 Year Residential, 5 Year Commercial
• Motor 24 VDC Brushless Motor ½ HP - Continuous Duty Cycle
• Duty Cycle Continous
• Power Options 120/220 VAC Single Phase or 12/24V Solar panel
• Gear Box Ratio 20:1 with internal disconnect
• Cover Rotationally molded plastic (polyethylene)
• Dimensions W: 15.5" – L: 18.5" – H 16"
• Maximum Gate Length 50 Feet
• Maximum Gate Weight 1,600 lbs
• Gate Travel Speed 12 inches per sec
• Operator Weight 93 lbs
• Emergency Release Options Mechanical Foot Pedal Release
• Battery Backup Integrated, Capable of up to 150 cycles on a 1000lbs Gate Battery: Two 8 Ah Batteries 12VDC
• Solar Capabilities 12VDC or 24VDC Solar Panel Input

To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Apollo Solar Sliding Gate Openers:

**** The following is just a list of just some of the Nice (Apollo) solar sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Apollo solar sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

Nice (Apollo) 7251

Nice (Apollo) 7351

Nice (Apollo) 7000ETL

Nice (Apollo) 7100ETL

Nice (Apollo) 7200ETL

Nice (Apollo) 7300ETL

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Nice (Apollo) 7251 Post Mount Slide Gate Operator (7251)

Nice (Apollo) 7251 Slide Gate Operator

Post mounted operator for sliding gates up to 800 lbs weight and 25 ft length each. 7251 single gate application. Supplied with 35 feet #40 roller chain.

Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power.

Easily installed on most existing or new slide gates. The operator has practical adjustment of the limit switches and internal quick release system for manual operation. Uses the single/dual advanced 1050 circuit board.

Featured

• LCD display for easy programming, diagnosting and troubleshooting
• Innovative obstacle detection system
• Plug-in receiver: up to 1,000 rolling-code transmitters
• Smart management of the battery charging
• Integrated 7 day timer
• Master/slave management for two motors working together
• Protection against electrical surges
• Programmable inputs for external accessories
• Corrosion Resistant

Specs

• Power Supply 12VDC
• Operating Voltage 12VDC
• Current Draw 10mA (standby)
• Speed 1' per seconds
• Duty Cycle Varies based on charging capacity
• Dimensions 21.5 x 21 x 11.5 in.

To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Nice (Apollo) 7351 Pad Mounted Slide Gate Operator (7351)

Nice (Apollo) 7351 Pad Mounted Slide Gate Operator

Pad mounted operator for sliding gates up to 800 lbs weight and 25 ft length each. Recommended for high cycle residential an light commercial applications.

7351 single gate application. Supplied with 35 feet #40 roller chain. Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power.

Easily installed on most existing or new slide gates. The operator has practical adjustment of the limit switches and internal quick release system for manual operation. Uses the advanced 1050 circuit board.

Features

• LCD display for easy programming, diagnosting and troubleshooting
• Innovative obstacle detection system
• Plug-in receiver: up to 1,000 rolling-code transmitters
• Smart management of the battery charging
• Integrated 7 day timer
• Master/slave management for two motors working together
• Protection against electrical surges
• Programmable inputs for external accessories
• Corrosion Resistant

Specs

• Power Supply 12-30VDC
• Operating Voltage 12VDC
• Current Draw 10mA
• Speed 1 ft per second
• Duty Cycle Varies based on charging capacity
• Dimensions 20 L x 15 W x 26H

To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Apollo 7000ETL Slide Gate Operator (7000ETL)

Apollo 7000ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 20', 600 lbs.
Pad mounted
Timer to close option
Adjustable limits
Available in dual gate model
Weather resistant
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Apollo 7100ETL Slide Gate Operator (7100ETL)

Apollo 7100ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 20', 600 lbs.
Post mounted
Timer to close option
Adjustable limits
Available in dual gate model
Weather resistant
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Apollo 7200ETL Slide Gate Operator (7200ETL)

Apollo 7200ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 30', 1000 lbs.
Post mounted
Available in dual gate model
Weather resistant
Timer to close option
Adjustable limits
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

*************

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Apollo 7300ETL Slide Gate Operator (7300ETL)

Apollo 7300ETL Slide Gate Operator

Meets UL325 standards
Operates slide gates up to 30', 1000 lbs.
Pad mounted
Available in dual gate model
Timer to close option
Adjustable limits
Weather resistant
12V DC battery, solar or AC rechargeable

To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

**********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

GTO Solar Sliding Gate Openers:

**** The following is just a list of just some of the GTO solar sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your GTO solar sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

GTO PRO-SL2000B

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

GTO PRO-SL2000B Slide Gate Operator GTO PRO-SL2000B

GTO PRO-SL2000B Slide Gate Operator

The GTO/PRO PRO-SL2000B series will handle gates weighing up to 1000 lbs. (453.6 kg) and 30 ft. (9.1 m) in length with a 20 ft. (6.1 m) opening, if all proper installation procedures have been followed. Note: ball bearing rollers should be used on all gates.

FEATURES:

• Full systems capable “add on ready” heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0–120 seconds).
• Includes a built-in internal friction disc brake/lock.
• Easy to install 4 ft. (1.2 m) post mounts (2) provided.
• Chain disconnect for manual operation.
• Light professional and residential cycle rated to 100 cycles daily.

MECHANICAL:

• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: 1 ft. (.31 m) per second.
• #41 Chain 32 ft. with master link.
• Fully compatible accessory terminal block provides connectionsfor safety loops, wands, intercoms, card readers, phone systems.
• Operation, diagnostic and safety alarms
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.

ELECTRICAL/POWER:

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
• Battery charge is maintained by a 120V AC/60 Hz input and 18VAC at 40 VA. output, transformer rectified to 14V DC through control board
• Powered by a reliable 12 Volt (1/4 HP equivalent) DC motor, casehardened steel gear reducer.
• Charging regulated circuit on control board. “Sleep draw” is 40mA; “active draw” is 2 to 9 amps.

DIMENSIONS:

• Height: 18 ̋
• Depth: 11 ̋
• Width: 21.5

SHIPPING WEIGHT:

• 70 lbs. (32 kg) Meets UPS shipping standards

WARRANTY:

• 2 Year (RESIDENTIAL application)

CLASS OF OPERATION:

• Class I, II, III, IV

SAFETY LISTINGS:

• System Certified with UL325 5th Edition safety standards, ETL listed.

OPTIONS:

• Solar Power: Requires a 24 Amp hour battery (not included).10-watt Solar Panel
• Charger:float voltage 14.5 V DC output from 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
• Pad Mount: requires the Pad Mounting Plate (SGMP).Dual Gates: For dual gate applications, add model PRO-SL2200B

To get on our schedule for your GTO sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear Solar Sliding Gate Openers:

**** The following is just a list of just some of the Linear solar sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Linear solar sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

Linear HSLG

***********

S.O.S Solar Sliding Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear HSLG Series Slide Gate Operator (HSLG)

Linear HSLG Series Slide Gate Operator

The HSLG is a continuous-duty slide gate operator for commercial and industrial applications.

Cabinet

• Weather-resistant galvannealed steel cabinet with powder coat finish
• Lockable, gasketed, hinged and removable front cover for easy access

Mechanical

• #40 roller chain and sprockets
• Adjustable torque limiter
• Heavy-duty pillow-block bearings
• Efficient double V-belt drive

Mounting

• 3 - 3 1/2" OD post mounting
• Optional pad mounting pedestal available

Control Circuit

• Solid state circuit board, 24 VDC
• Inherent current sensing system
• 15 LEDs for easy setup and troubleshooting
• Built in maximum run timer and auto close timer
• Right-hand/left-hand easy conversion
• Entrapment alarm

Warning Signals

• Continuous tone entrapment alarm
• Warning beeper to sound when gate is moving
• Pre-start audio/visual outputs included

ELECTRICAL

• 1/2, 3/4 or 1 hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty PSC motor
• 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor
• Magnetic solenoid disc brake
• Power on/off switch
• Emergency stop/reset button on front coverlinear hs
• Duplex receptacle on 115 VAC units
• Three-button control station included
• Accessory connections are 24-volt AC or DC
• Easily adjustable rotary limit switches
• Full system capable for access controls and reversing devices

MECHANICAL FEATURES:

• Heavy duty zinc plated steel chassis
• Easily operated emergency manual disconnect handle
• Sleek and sturdy UV-stabilized polyethylene cover
• #41 drive chain - 31' included with the operator
• Universal pad mount standard - optional post mount kit available

MODEL SLD EXCLUSIVE FEATURES:

• Full DC powered operator with built in battery backup
• Continuous duty 1/2 HP DC permanent magnet motor
• Powered by 115V or 24VDC supply
• Seamless transition to battery backup mode when AC power fails
• Selectable fail-safe or fail-secure modes of operation
• Solar power capable

Capacities:

• 1/2 HP - MAXIMUM GATE WEIGHT 1100 LBS. or MAXIMUM GATE LENGTH 35 FT.
• 3/4 HP - MAXIMUM GATE WEIGHT 1200 LBS. or MAXIMUM GATE LENGTH 45 FT.
• 1 HP - MAXIMUM GATE WEIGHT 1700 LBS. or MAXIMUM GATE LENGTH 55 FT.

To get on our schedule for your Linear sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

***********

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Liftmaster Solar Barrier Arm Gate Openers:

********** The following is just a small list of some Liftmaster solar barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Liftmaster solar barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********

Liftmaster MEGA ARM

Liftmaster MEGA ARM TOWER

Liftmaster MEGA ARM SPRINT

Liftmaster MEGA ARM SPRINT TOWER

***********

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Liftmaster MEGA ARM DC Barrier Arm Gate Operator MA

Liftmaster MEGA ARM DC Barrier Arm Gate Operator

Liftmaster® high-traffic DC powered barrier gate operators with Battery Backup keep traffic flowing and provide easy in and out access 24 hours a day. Rated for 6,000 cycles per day with an opening time of 2.5 seconds and constructed of corrosion resistant aluminum alloy, the Mega Arm/Mega Arm Tower are the ideal choice for high-traffic applications. The product’s Security+ 2.0® radio technology provides unparalleled reliability and quick, secure access. Optional LED Barrier Arm provides exceptional visibility 24 hours a day.

Performance

• Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
• Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
• Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
• Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
• Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
• Sequenced Access Management provides control between barrier and slide/swing gate operators to maximize traffic flow.
• K1 Relay provides output signals to activate other accessories or operators during open/close cycles.

Safety and Security

• Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
• Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
• Anti-Tailgate Feature prevents unauthorized access to your property.
• Built-in Surge Suppression protects against high-voltage spikes and surges.

Features

• Dual-Gate Operation Works in conjunction with another barrier gate operator.
• Built-In 110V Convenience Outlet Simplifies adding/powering up accessory devices. Save the expense of having to add an extra outlet.
• Universal Controller With 8 Inputs Allows for the connection of a full range of optional external devices.
• Right or Left Handed Operation Provides flexibility to fit your application and ease of installation.
• Slip Clutch Option Allows arm to be manually pushed open without damaging the shear pin. Arm automatically resets to normal closed position upon receiving activation.
• 850LM Radio Receiver Included Stores up to 90 remote controls.
• Warranty Two years parts. Ten years frame.

Specifications

• Operator Speed 2.5 seconds to open or close
• Power 120V / 220V applications
• Accessory Power 24VDC 500 mA
• Operator Weight (without arm) MADCBB3 – 89 lbs. MATDCBB3 – 113 lbs.
• UL Listed UL 325 & UL 991 – Class I, II, III, IV

Construction

• Gear Reduction 60:1 reducer in synthetic oil bath
• Motor 1/2 HP equivalent Continuous-duty 24VDC / 800 RPM
• Chassis Powder coated 1/4 in. aluminum alloy
• Cover MA – UV-resistant polyethylene MAT – Full aluminum cabinet

Recommended Capacities

• HP 1/2
• MAX ARM LENGTH 12ft. & 17ft. Aluminum Arm and 14ft. Soft-Padded arm
• MAX CYCLES/DAY 6,000

LiftMaster® gate operators comply with UL 325 standards. External entrapment devices must be added to meet UL 325 standards. Your installer will recommend suitable entrapment devices such as photoelectric sensors or edge sensors.

LED Barrier Arm Specifications

• Arm Material Aluminum
• Operating Voltage 12VDC
• Lamp Type LED 3528 IP68 Silica gel filled
• Color Red/White
• Power 14.4 W/m
• Operating Temperature -13°F (-25°C) to 140°F (60°C)
• UL Listed UL 325 & UL 991 – Class I, II, III, IV
• Warranty Six month limited.

MALED12

• Arm - 12 ft. x 3 in. x 2 1/4 in., 17 lbs. (10 ft. 9-3/4 in. installed)
• Contents (1) 12 ft. Arm with LED (1) Installation Kit

MALED17

• Arm 17 ft. x 3 in. x 2 1/4 in., 25 lbs. (14 ft. installed)
• Requires Counterweight (MALEDCW)
• Contents (1) 17 ft. Arm with LED (1) Installation Kit

MALEDCW

• Counterweight 14 in. x 2 3/4 in. x 2 1/8 in., 11 lbs.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Liftmaster MEGA ARM TOWER DC Barrier Arm Gate Operator MAT

Liftmaster MEGA ARM TOWER DC Barrier Arm Gate Operator

LiftMaster® high-traffic DC powered barrier gate operators with Battery Backup keep traffic flowing and provide easy in and out access 24 hours a day. Rated for 6,000 cycles per day with an opening time of 2.5 seconds and constructed of corrosion resistant aluminum alloy, the Mega Arm/Mega Arm Tower are the ideal choice for high-traffic applications. The product’s Security+ 2.0® radio technology provides unparalleled reliability and quick, secure access. Optional LED Barrier Arm provides exceptional visibility 24 hours a day.

Performance

• Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
• Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
• Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
• Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
• Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
• Sequenced Access Management provides control between barrier and slide/swing gate operators to maximize traffic flow.
• K1 Relay provides output signals to activate other accessories or operators during open/close cycles.

Safety and Security

• Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
• Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
• Anti-Tailgate Feature prevents unauthorized access to your property.
• Built-in Surge Suppression protects against high-voltage spikes and surges.

Features

• Dual-Gate Operation Works in conjunction with another barrier gate operator.
• Built-In 110V Convenience Outlet Simplifies adding/powering up accessory devices. Save the expense of having to add an extra outlet.
• Universal Controller With 8 Inputs Allows for the connection of a full range of optional external devices.
• Right or Left Handed Operation Provides flexibility to fit your application and ease of installation.
• Slip Clutch Option Allows arm to be manually pushed open without damaging the shear pin. Arm automatically resets to normal closed position upon receiving activation.
• 850LM Radio Receiver Included Stores up to 90 remote controls.
• Warranty Two years parts. Ten years frame.

Specifications

• Operator Speed 2.5 seconds to open or close
• Power 120V / 220V applications
• Accessory Power 24VDC 500 mA
• Operator Weight (without arm) MADCBB3 – 89 lbs. MATDCBB3 – 113 lbs.
• UL Listed UL 325 & UL 991 – Class I, II, III, IV

Construction

• Gear Reduction 60:1 reducer in synthetic oil bath
• Motor 1/2 HP equivalent Continuous-duty 24VDC / 800 RPM
• Chassis Powder coated 1/4 in. aluminum alloy
• Cover MA – UV-resistant polyethylene MAT – Full aluminum cabinet

Recommended Capacities for 1/2 HP

• MAX ARM LENGTH (ft.) 12ft. & 17ft. Aluminum Arm 14ft.
• CYCLES/DAY Soft-Padded arm. 6,000

LiftMaster® gate operators comply with UL 325 standards. External entrapment devices must be added to meet UL 325 standards. Your installer will recommend suitable entrapment devices such as photoelectric sensors or edge sensors.

LED Barrier Arm Specifications

• Arm Material Aluminum
• Operating Voltage 12VDC
• Lamp Type LED 3528 IP68 Silica gel filled
• Color Red/White
• Power 14.4 W/m
• Operating Temperature -13°F (-25°C) to 140°F (60°C)
• UL Listed UL 325 & UL 991 – Class I, II, III, IV
• Warranty Six month limited.

MALED12

• Arm 12 ft. x 3 in. x 2 1/4 in., 17 lbs. (10 ft. 9-3/4 in. installed)
• Contents (1) 12 ft. Arm with LED (1) Installation Kit

MALED17

• Arm 17 ft. x 3 in. x 2 1/4 in., 25 lbs. (14 ft. installed)
• Requires Counterweight (MALEDCW)
• Contents (1) 17 ft. Arm with LED (1) Installation Kit

MALEDCW

• Counterweight 14 in. x 2 3/4 in. x 2 1/8 in., 11 lbs.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Liftmaster MEGA SPRINT DC Barrier Arm Gate Operator MAS

Liftmaster MEGA SPRINT DC Barrier Arm Gate Operator

The Mega Arm Sprint is a DC-powered, high-speed addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional speed, making it ideal for parking applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.

No power? No problem! Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.

Standard Features:

• Radio receiver built-in
• Aluminum alloy chassis
• Built-in battery backup
• Soft start/stop
• DC operator system
• Right or left-handed operation
• Breakaway arm
• Control inputs
• Inherent obstruction sensing
• LED indicators
• Dual gate operation
• Dynamic braking
• Magnetic sensors
• Timer to close
• 2-year warranty for electronics and mechanism;
• 10-year warranty for chassis and cover

Performance

• Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
• Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
• Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
• Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
• Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
• Sequenced Access Management provides control between barrier and slide/ swing gate operators to maximize traffic flow
• K1 Relay provides output signals to activate other accessories or operators during open/close cycles

Safety and Security

• Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
• Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
• Anti-Tailgate Feature prevents unauthorized access to your property.
• Built-in Surge Suppression protects against high-voltage spikes and surges.

*Basic set up with remote controls programmed with a 12 ft. Barrier Arm. Does not include power draw from added accessories. Liftmaster low power draw accessories recommended to extend cycles on Battery Backup.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Liftmaster MEGA SPRINT TOWER DC Barrier Arm Gate Operator MAST

Liftmaster MEGA SPRINT TOWER DC Barrier Arm Gate Operator

The Mega Arm Sprint Tower is a DC-powered, high-speed addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional speed, making it ideal for parking applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.

No power? No problem! Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.

Barrier arms sold separately

Standard Features:

• Radio receiver built-in
• Aluminum alloy chassis
• Built-in battery backup
• Soft start/stop
• DC operator system
• Right or left-handed operation
• Breakaway arm
• Control inputs
• Inherent obstruction sensing
• LED indicators
• Dual gate operation
• Dynamic braking
• Magnetic sensors
• Timer to close
• 2-year warranty for electronics and mechanism;
• 10-year warranty for chassis and cover

Performance

• Get on and off your property even when the power’s out with our Battery Backup feature and ultra-efficient power management system.
• Get durable protection and easy service access with the Aluminum Alloy Cover.
• Extend the life of the Operator with soft start/stop and a powerful 24V DC Motor.
• Rated for gates up to 10,000 cycles per day.

Safety and Security

• With our built-in Security+ 2.0® interference-eliminating technology, you can be confident that your property is secure and only your remote will open and close your gate.
• Emergency access compliant so first responders can have access if they need it.
• Know when your gate is about to open or close with a pre-motion warning.
• UL/cUL Listed tested to the most stringent industry guidelines.
• LiftMaster Gate Operator complies with UL325 standards. Secondary entrapment devices must be added to meet UL325 standards. Your Installer will recommend suitable secondary entrapment devices such as photo eyes or edge sensors.

To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Apollo Solar Barrier Arm Gate Openers:

********** The following is just a small list of some Apollo solar barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Apollo solar barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********

Nice Apollo LBAR

Nice Apollo M3BAR

Nice Apollo M5BAR

Nice Apollo M7BAR

***********

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Nice(Apollo) LBAR Barrier Arm Gate Operator LBAR

Operator 24 Vdc for bars up to 29.5 ft. Steel case with protective cataphoresis treatment and paint finish.

Operator 24 Vdc for bars up to 29.5 ft. Steel case with protective cataphoresis treatment and paint finish.

Modular: bars are easily assembled using the aluminum expansion joint. Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover.
• Encoder movement control and electromechanical limit switches.

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks.
• Rapid and easy access to the control unit located in the upper section of the barrier body.
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.3A
• Power 24VDC
• Torque 400
• Cycles/Hour 150
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Nice(Apollo) M3BAR Barrier Arm Gate Operator M3BAR

Operator 24 Vdc for bars up to 13.1 ft. or 16.5 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.

Modular:

• bars are easily assembled using the aluminum expansion joint.
• Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover
• Encoder movement control and electromechanical limit switches

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks
• Rapid and easy access to the control unit located in the upper section of the barrier body
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.1A
• Power 24VDC
• Torque 200
• Cycles/Hour 350
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Nice(Apollo) M5BAR Barrier Arm Gate Operator M5BAR

Operator 24 Vdc for bars up to 13.1 ft. or 16.5 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.

Modular: bars are easily assembled using the aluminum expansion joint. Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover
• Encoder movement control and electromechanical limit switches

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks
• Rapid and easy access to the control unit located in the upper section of the barrier body
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.1A
• Power 24VDC
• Torque 200
• Cycles/Hour 350
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Nice(Apollo) M7BAR Barrier Arm Gate Operator M7BAR

Operator 24 Vdc for bars up to 16.5, 19.7 or 23 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.

Modular:

• bars are easily assembled using the aluminum expansion joint
• Possibility for intelligent control of two opposing operators thanks to "master/slave” function.

Strength and reliability:

• robust structure in steel
• new high strength balancing springs
• elliptical section bar with high wind-gust resistance
• Optional flashing or traffic light can be integrated in cover
• Encoder movement control and electromechanical limit switches

More comfort and safety in programming and maintenance:

• the separate enclosures for electronics and mechanics protect internal parts from potential risks
• Rapid and easy access to the control unit located in the upper section of the barrier body
• Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.

More safety and reliability:

• obstacle detection and monitoring of motor current during automation movement
• Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
• Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).

Energy saving:

• the system sets to standby when not in use to lower power consumption.

No blackouts:

• emergency backup power with the optional batteries housed inside the case.
• Release from side with metal key, can be installed on either side.

Features

• Adjustable Force
• Adjustable Speed
• Auto Close Delay
• Precision Encoder

Specs

• Power Supply 120VAC
• Absorption 1.1A
• Power 24VDC
• Torque 300
• Cycles/Hour 200
• Protection IP Rating 44

Technology

• O-View - Unit for control, programming and diagnostics. On site or remotely.
• BlueBus - Easy and quick installations, just two wires without polarity!

To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear Solar Barrier Arm Gate Openers:

********** The following is just a small list of some Linear solar barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Linear solar barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********

Linear BGU-D

Linear BGU-S

***********

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear BGU-D Barrier Arm Gate Operator BGU-D

Linear BGU-D Series Barrier Gate Operators

For traffic control and parking applications, available in 1/2 horsepower, 115V supply voltage, various arm lengths.

Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.

The BGU-D has programmable fail safe or fail secure operation. With fail safe selected, when the gate operator senses AC power is no longer present, the arm will cycle open, remaining open until AC power is restored. With fail secure selected, during a power failure the BGU-D continues normal operation while monitoring the battery level. Once the batteries are low, the unit will cycle open until AC power is restored or the batteries receive a full charge via optional solar panels.

Ratings

• Maximum duty cycle: Continuous

Features

• Integral APeX Controller
• 24 VDC permanent magnet motor
• 115 VAC supply converted to 24 VDC for motor and controls
• Dual batteries charged by 115 VAC or optional solar panels
• On-board APeX Controller three-button control station
• Power on/off switch
• All accessory connections 24 VDC
• Easily adjustable cam-operated limit switches
• Lockable and removable front cover for easy access
• Built-in maximum run timer and auto close timer
• Master/second with simple 3-wire connection
• Dual V-belt
• Heavy-duty right angle gear reducer
• Heavy-duty harmonic link with oil impregnated bronze bushings
• Gate arm clamp with breaker bar
• Full system capable for access control and reversing devices
• Weather resistant galvanized steel cabinet with powder coat finish

Arm Options

• 10 foot wood arm
• 12 foot wood arm
• 14 foot wood arm

Factory Options

• White or yellow powder coat finish
• Optional thermostatically-controlled strip heater
• Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present

Warranty

• 5 years

To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Solar Barrier Arm Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear BGU-S Barrier Arm Gate Operator BGU-S

Linear BGU-S Series Barrier Gate Operators

For traffic control and parking applications, available in 1/2 horsepower, 115V supply voltage, various arm lengths.

Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.

The BGU-S has programmable fail safe or fail secure operation. With fail safe selected, when the gate operator senses AC power is no longer present, the arm will cycle open, remaining open until AC power is restored. With fail secure selected, during a power failure the BGU-S continues normal operation while monitoring the battery level. Once the batteries are low, the unit will cycle open until AC power is restored or the batteries receive a full charge via optional solar panels.

Ratings

• Maximum duty cycle: Continuous

Features

• Integral APeX Controller
• 24 VDC permanent magnet motor
• 115 VAC supply converted to 24 VDC for motor and controls
• Dual batteries charged by 115 VAC or optional solar panels
• On-board APeX Controller three-button control station
• Power on/off switch
• All accessory connections 24 VDC
• Easily adjustable cam-operated limit switches
• Lockable and removable front cover for easy access
• Built-in maximum run timer and auto close timer
• Master/second with simple 3-wire connection
• Dual V-belt
• Heavy-duty right angle gear reducer
• Heavy-duty harmonic link with oil impregnated bronze bushings
• Gate arm clamp with breaker bar
• Full system capable for access control and reversing devices
• Weather resistant galvanized steel cabinet with powder coat finish

Arm Options

• 10 foot wood arm
• 12 foot wood arm
• 14 foot wood arm

Factory Options

• White or yellow powder coat finish
• Optional thermostatically-controlled strip heater
• Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present
• Warranty 5 years

To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Liftmaster Access Control Devices

**** The following is just a list of just some of the Liftmaster access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your Liftmaster access contols repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

LiftMaster CAP2D

LiftMaster CAPCELL

LiftMaster CAPXL

LiftMaster EL1SS

LiftMaster EL2000SS

LiftMaster EL25

LiftMaster ICON26

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster CAP2D 2-Gate Controller (CAP2D)

Connected Access Portal 2-Door Controller cloud-based credentialed access control.

Key Features

• LIFTMASTER CLOUD™ Smart Access Control Software
• Controls up to 2 Gates/Doors Each
• Easily Expandable Network through LiftMaster Cloud

Smart

• Multiple-Entrance Control with LiftMaster Cloud.
• Eliminate Wiring between controllers in multiple-entrance applications with LiftMaster Cloud.
• Universal Compatibility with 26- and 30-bit Wiegand-compatible readers, receivers and RFID readers.
• Expansive Capacity for 25,000 active credentials stored locally so residents can enter even when the internet is down.
• Remote Programming and activity monitoring using LiftMaster Cloud.

Reliable

• Easy to Install in new or existing properties.
• Backed-Up Storage in LiftMaster Cloud ensures that databases are never lost.
• Power over Ethernet (PoE) allows for flexibility of device placement.

Secure

• Email Alerts let you know when a suspended code is used or if an active code is being overused.
• Real-Time Activity Tracking with LiftMaster Cloud.
• Cloud-Based Security keeps data protected and safeguards resident information.

Total Solution Accessories

• CAPXL Connected Access Portal, High Capacity cloud-based access control for residents and guests.
• CAPCELL Cellular 4G/LTE Modem with Wi-Fi® makes it easy to connect CAPXL and CAP2D(s) anywhere.
• PPWR Passport Receiver compatible with all standard Wiegand Protocols.
• PPV3M/PPK3PHM/PPLK1-X Passport Remote Controls Visor and keychain remotes with unique credentialed IDs.
• KPR2000 Wired /Keypad and Proximity Reader single-entry, multifunction controller that supports up to 2,000 users.
• LMMC-MINI /multiCLASS® SE RP10 MINI Mullion proximity reader for credentialed access.
• LMPC2-ST Proxcard II® 1326 /Clamshell Card proximity card for credentialed access.

Capacities

• 2 controlled gates / doors
• 25,000 local resident capacity
• 6,000 local event history (FIFO) offline from host
• Multiple, Holiday and Hold-Open Scheduling, including one-time and repeating exceptions

Power

• 12V DC, Min. 1.5 Amps (transformer not included)
• PoE (802.3af) enabled network devices, 13 Watts max.
• UL® listed

Dimensions

• 4.5" x 3" x 1.25"

Mechanics

• Compact size mounts on standard single electrical-gang box or in a NEMA enclosure
• Led indicator lights communicate status

Communication

• Internet (Dynamic or Static IP)
•    LiftMaster Cloud subscription required
•    High speed
•    DSL with at least 1 MB download speed
•    Cellular (optional CAPCELL)
• Input Ports
•    2 Wiegand inputs
•    2 Request-to-exit (REX) inputs
•    2 Supervised inputs
• Outputs
•    2 Primary relays
•    2 Auxiliary relays

Warranty

• 2 Year Warranty

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster CAPCELL Cellular 4G/LTE Modem (CAPCELL)

Cellular 4G/LTE Modem with Wi-Fi® brings connectivity anywhere.

Key Features

• Plug and play easy setup.
• Use your preferred carrier, compatible with major U.S. and Canadian carriers

Smart

• Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
• Sign up with your preferred carrier or add on to your current plan.
• Avoid trenching and wire pulling for speedy installations.
• Eliminate plain old telephone service (POTS) and improve reliability.

Reliable

• 4G/LTE Connection eliminates the need for hardwired internet.
• Durable, Commercial-Grade Construction withstands extreme temperatures.
• Fan-less Design means no clogged filters and no overheating.

Secure

• Password-Protected Wi-Fi ensures privacy.
• Avoid the Complications of complex networks and firewalls.

Compatibility

• At&t®
• Verizon®
• T-mobile®
• Bell®
• Rogers™
• Telus®

Total Solution Accessories

• CAPXL Connected Access Portal, High Capacity cloud-based access control for residents and guests.
• CAP2D Connected Access Portal, 2-Door Controller cloud-based, credentialed access control.
• 828LM Internet Gateway enables smartphone control for MyQ® products.
• CSW24UL Gate Operator ensures quick and safe access for gated communities and mid- to high-rise buildings. Pair with CAPXL for remote system diagnostics.
• WFAEXT Antenna Mounting Kit for remote antenna mounting and extended cell or Wi-Fi range.
• Elevator Access Control CAPB485 / CAPDC485/ CAPRELAY integrated elevator access and control.

Capacities

• Connect up to 4 wired or multiple Wi-Fi devices

Power

• Input 100–240V AC to 12V DC(transformer included)

Mechanics

• Commercial-grade metal housing
• Primary and backup antennas for cellular and Wi-Fi

Dimensions

• 1.2" x 4.3" x 3.3" (antenna is 6.75")

Communication

• Internet
•    Cellular 4G/LTE with 3G fallback. Also compatible with multiple carriers
• Wi-Fi
•    Supports 64-/128-Bit WEP, WPA and WPA2
•    Wireless N Speeds (up to 300 MB/s) 2.4 GHz
•    Ability to set static IP addresses
• Ports
•    4 RJ45 LANs
•    1 RJ45 WAN
•    1 SIM Card Slot
•    2 Cellular SMA Antennas
•    2 Wi-Fi SMA Antennas
•    USB

Operating Temperature

• -22°F - 158°F (-30°C - 70°C)

Warranty

• 2 Year

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster CAPXL Connected Access Portal (CAPXL)

Connected Access Portal High Capacity Cloud-based access control for residential communities.

Key Features

• LiftMaster Cloud™ Smart Access Control Software
• Color Touch Display 10”, 720p High-Def Interface
• Plug and Play Easy Setup and Programming

Smart

• Intuitive Interface with color touch display for superior resident and guest usability.
• Customizable Background on a 10", full-color, 720p high-definition screen.
• Remote Programming and activity monitoring using Liftmaster Cloud.
• Configurable Email Notifications know when codes are overused or if service is needed for the CAPXL, CAP2D or Gate Operator.
• Eliminate Trenching with Wi-Fi® and wireless link to Liftmaster® Gate Operators.

Reliable

• Voice Over IP (VoIP) provides crystal-clear call quality with no long-distance charges.
• Stainless Steel for a modern, durable design.
• Local System Memory allows residents to enter even when the internet is down.

Secure

• Get Alerted when a suspended code is used or if an active code is being overused.
• Real-Time Activity Tracking with Liftmaster Cloud.
• Cloud-Based Security keeps data protected and safeguards resident information.

Total Solution Accessories

• CAP2D Connected Access Portal, 2-Door Controller cloud-based, credentialed access control.
• CAPCELL Cellular 4G/LTE Modem with Wi-Fi makes it easy to connect CAPXL and CAP2D(s) anywhere.
• CAPXLTK Trim Kit and Back Kit conceal openings left from other systems in flush-mount, Infinity L and Icon installations.
• Passport Remote Controls PPV3M / PPK3PHM / PPLK1-X visor and keychain remotes with unique credentialed IDs.
• LMMC-MINI multiCLASS® SE RP10 Mini Mullion proximity reader for credentialed access.
• LMPC2-ST PROXCARD II® 1326 Clamshell Card Proximity card for credentialed access.
• CAP485 Elevator Access Control CAPB485 / CAPDC485 / CAPRELAY Integrated elevator access and control.
• 86LM/WFAEXT Antenna Mounting Kit For extended range or remote mounting for radios or Wi-Fi.
• Gate Operators CSW24UL / CSL24UL / HCTDCUL Ensure quick and safe access for residential communities. Pair with CAPXL for remote system diagnostics.

Capacities

• 4 Controlled Gates/Doors
• Wireless Link for up to 8 LiftMaster® Operators
• 4 to 8 Digit Entry Codes
• 4 to 6 Digit Directory Codes
• 50,000 Local Resident Capacity
• 50,000 Local Event History
• Multiple, Holiday and Hold-Open Scheduling, including one-time and repeating exceptions

Power

• Input 120V AC (Transformer Included)
• UL® Listed
• Relay Outputs 3 Amps

Dimensions

• CAPXL: 18" x 14" x 4.5"
• CAPXLTK (Outer Trim): 23.75" x 19.375"

Mechanics

• 10", 720p High-definition touch display
• Fade-and glare-resistant display
• Outdoor stainless-steel housing
• Built-in Security+ 2.0® radio
• Postal lock provision
• Surface, flush (CAPXLTK) or pedestal (PED42, PED64) mount
• Camera ready; use any standard pinhole camera

Standard Specs

• Communication Internet (Dynamic or Static IP)
• LiftMaster Cloud subscription required
• Wi-Fi®
• High speed DSL with at least 1MB download speed
• Cellular (optional CAPCELL)

Voice

• VoIP (Voice over IP)
• Phone.com® Service Required for VoIP

Onboard Radio

• Security+ 2.0 for Passport Remote Controls
• Wireless link to UL 325 Gate Operators manufactured after October 2017
• Retrofit Kits will be available for operators manufactured between January 2016 and October 2017
• HomeLink® IV and V Compatible*

* Requires HOA or Management Assistance

Warranty

• 2-Year

Input Ports

• 4 Wiegand Inputs
• 4 Request to-Exit (REX) Inputs
• 4 Supervised inputs
• 1 Auto-Call input (Requires LPEXP)

Outputs

• 4 Primary relays
• 4 Auxiliary relays
• 1 Wiegand output

Operating Temperature

• -20°F - 130°F (-29°C - 51°C)

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster EL1SS Telephone Entry Systems (EL1SS)

The LiftMaster® EL1SS Telephone Intercom and Access Control System provides wired telephone intercom communication and secure access control at the gate or door. It is easy to install, and its rugged stainless steel housing provides reliable, durable performance year after year, all at an exceptional value. With the EL1SS, residents or small businesses can simply communicate with visitors, grant or deny access, all from the convenience of their phone.

Performance

• Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
• Easy-to-install design saves an average of 10 minutes on installation time over older models.
• Simple design makes it ideal for residents and visitors to communicate and grant or deny access.
• Stainless steel faceplate with black powder coated housing is attractive and tough.
• 200 (4-digit) unique, programmable entry codes provide convenient assigned access

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster EL2000SS Telephone Entry System (EL2000SS)

The EL2000SS is a high-capacity telephone entry access control system designed to complement virtually any gated community. It is flexible enough to be used in apartment buildings, condo complexes, office parks and commercial sites. It features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line, making it a great choice for multi-tenant installations.

The EL2000SS utilizes our new Versa XS 4.0 menu-driven software configuration and database management tool with a simple user interface designed with you in mind. It includes FREE cloud storage for reliable data sharing and backup.

Available in a stainless steel housing.

Performance

• Entry Codes allow for 2,000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes, 1000 card codes, 500 entry codes for example.
• Call Waiting allows the resident to answer a call from the gate or door while on another call.
• Recessed, Lighted, ADA-Compliant Keypad makes entering your PIN easy and convenient.
• Transaction Monitoring stores a maximum of 8,000 transactions including date, time, identification and transaction type.
• Remote Updates enables system updates and upgrades to be made via a modem connection.
• Wiegand inputs Up to 4 Wiegand inputs, with 2 (optional) plug-in modules (WOMODKT).
• Programmable Relays provide four assignable built-in relays.
• Activity Reporting gives property managers the ability to print database, system and history reports.
• Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
• Versa XS is our menu driven software configuration and database management tool for EL2000 Telephone Entry Systems. To learn more about Versa XS click here.

Safety and Security

• Auto Sensor input automatically dials the residence or can activate relays.
• Anti-Passback prevents pass back of cards and codes for a pre-programmed amount of time to eliminate tailgating.
• Security Lockout prevents access for a pre-programmed amount of time when too many invalid code attempts are made.
• Postal Lock provision supports a switch kit that integrates with U.S. Postal Service lock so only a postal carrier can enter.
• Unlock Schedule for a gate or door allows you to configure entry points to automatically open or lock at set periods of time.
• Holiday Programming provides up to 16 days that can be defined to override the standard lock/unlock schedules.
• Time Zone Feature allows for up to 62 programmable time zones with three segments each.

Specifications

• Power - 120 VAC to 16 VDC transformer (included)
• Shipping Weight - 20 lbs.
• Dimensions - EL2000SS: 16 in. H x 11.25 in. L x 3.25 in. D
• Model Numbers - EL2000SS - LCD unit, stainless steel housing

Additional Features

• VERSA SOFTWARE - Versa XS is a Microsoft Windows® based software application that allows you to use almost any Windows personal computer to conveniently and securely configure, manage and update access control records. Download the latest version of Versa.
• UNIVERSAL BOARD - The EL25 and EL2000SS share the same main processing board, which makes it much easier to master the installation and service both systems.
• REMOTE ACCESS DIAGNOSTICS - The EL2000SS will retain unit alarms within the system event buffer. For added security, the unit will record the following alarms: forced door/gate and ajar door/gate. The EL2000SS also records unit over voltage and under voltage alarms, allowing for simplified troubleshooting of the system.
• E-Z SCAN - Cards and Passport remote controls can be programmed into the EL2000SS simply by using the optional card reader or radio receiver installed into one of the plug-in modules. Is compatible with the PPWR and Passport remote controls. VOICE PROMPTS - Guides installers through system setup at the unit's main keypad and provides assistance to end users with the push of a button. (ADA application)
• WARRANTY - 2 Years.

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster EL25 Telephone Entry System (EL25)

Residential and Commercial Telephone Entry System with Expanded Capacity and Enhanced Versatility The EL25 is beautifully engineered for private residences, yet fully adaptable for use in apartment buildings, condo complexes, office parks and commercial sites. The EL25 utilizes our new Versa XS 4.0 menu-driven software configuration and database management tool with a simple user interface designed with you in mind. It includes FREE cloud storage for reliable data sharing and backup.

Available in grey, nickel or silver housing which can be landscape or portrait mounted.

Performance

• Entry Codes allow for 2,000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes, 1000 card codes, 500 entry codes for example.
• Call Waiting allows the resident to answer a call from the gate or door while on another call.
• Recessed, Lighted, ADA-Compliant Keypad makes entering your PIN easy and convenient.
• Transaction Monitoring stores a maximum of 8,000 transactions including date, time, identification and transaction type.
• Remote Updates enables system updates and upgrades to be made via a modem connection.
• Wiegand Inputs Up to 4 Wiegand inputs, with 2 (optional) plug-in modules (WOMODKT).
• Programmable Relays provide four assignable built-in relays.
• Activity Reporting gives property managers the ability to print database, system and history reports.
• Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
• Versa XS is our menu driven software configuration and database management tool for EL25 Telephone Entry Systems. To learn more about Versa XS click here.

Safety and Security

• Auto Sensor input automatically dials the residence or can activate relays.
• Anti-Passback prevents pass back of cards and codes for a pre-programmed amount of time to eliminate tailgating.
• Security Lockout prevents access for a pre-programmed amount of time when too many invalid code attempts are made.
• Postal Lock provision supports a switch kit that integrates with U.S. Postal Service lock so only a postal carrier can enter.
• Unlock Schedule for a gate or door allows you to configure entry points to automatically open or lock at set periods of time.
• Holiday Programming provides up to 16 days that can be defined to override the standard lock/unlock schedules.
• Time Zone Feature allows for up to 62 programmable time zones with three segments each.

Specifications

• Power - 120 VAC to 16 VDC transformer (included)
• Shipping Weight - 11 lbs.
• Dimensions - 6 in. H x 10.25 in. L x 4 in. D
• Model Numbers - EL25G - grey, EL25N - nickel, EL25S - silver

Additional Features

• Versa Software - Versa XS is a Microsoft Windows® based software application that allows you to use almost any Windows personal computer to conveniently and securely configure, manage and update access control records. Download the latest version of Versa. See Software Download.
• Universal Board - The EL25 and EL2000SS share the same main processing board, which makes it much easier to master the installation and service both systems.
• Remote Access Diagnostics - The EL25 will retain unit alarms within the system event buffer. For added security, the unit will record the following alarms: forced door/gate and ajar door/gate. The EL25 also records unit over voltage and under voltage alarms, allowing for simplified troubleshooting of the system.
• E-Z Scan - Cards and Passport remote controls can be programmed into the EL25 simply by using the optional card reader or radio receiver installed into one of the plug-in modules. Is compatible with the PPWR and Passport remote controls. Voice Prompts - Guides installers through system setup at the unit's main keypad and provides assistance to end users with the push of a button. (ADA application)
• Warranty - 2 Years.

To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

LiftMaster Advanced Multi-Tenant Access Control (ICON26)

LiftMaster ICON 26 Advanced Multi-Tenant Access Control System

• High-resolution, 10", 26-name, large LCD
• Two slots for memory cards
• High-quality digital communication system
• History buffer of up to 8,000 transactions
• 60 programmable utility keycodes per system
• Field upgradable memory capacity
• Programmable "unlisted resident" feature
• 6-digit resident keycode access
• 3-digit resident dialing
• System mutes speaker during dialing
• Touch-tone and rotary dial detection
• User-friendly local programming via built-in keyboard
• Two independent 7-day timers per relay output
• Postal lock ready
• "Exit Switch" ready

To get on our schedule for your Liftmaster gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear Access Control Devices

**** The following is just a list of just some of the Linear access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your Linear access contols repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

Linear AM3Plus

Linear AE-100

Linear RE-2

Linear RE-1

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear AM3Plus 4-Portal Access Controller (AM3Plus)

Linear AM3Plus 4-Portal Access Controller

The Model AM3Plus 4-Portal Access Controller is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

Housed in a lockable, plastic enclosure, the AM3Plus features a 2-digit LED display, nine status indicators, four relay indicators with four relay activation pushbuttons. Three programming buttons, a reset button, and a power indicator are present. The enclosure is monitored with a magnetic tamper switch.

The system controls its four output relays by responding to various input devices that react to proximity cards, transmitters, and entry codes. The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

Access is granted or denied depending on the current user's authorization to gain access and system settings that control groups of users or all users. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

For easy programming, the AM3Plus contains Linear's built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AM3Plus is also compatible with Linear's powerful AccessBase2000 dedicated access control PC software.

The AM3Plus is network ready. AM3Plus units can be interconnected with Linear's AE1000Plus and AE2000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AM3Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.

Two sets of Wiegand inputs are available for connection to 26, 30, or 31-bit Wiegand devices (card readers, etc.). Two sets of PBUS inputs are available for connection to Linear's line of remote accessories.

Capabilities with AccessBase2000 Programming

• Programming through dedicated PC
• Up to 10,000 cardholders grouped in sets
• Up to 24 card blocks with up to 1,900 cards each (45,600 total)
• Up to 20,000 individually enrolled cards
• Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total) †
• Up to 20,000 individually enrolled transmitters †
• Up to 20,000 entry codes for cardholders
• Up to 20,000 telephone directory codes for cardholders
• 20,000 event log entries per unit
• Up to 31 access time zones
• Up to six PBUS and two Wiegand devices per unit

Capabilities with AXNET Programming

• Programming using ANY PC through browser software
• Up to 2,000 cardholders
• Up to 24 card blocks with up to 1,600 cards each (38,400 total)
• Up to 2,000 individually enrolled cards
• Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total) †
• Up to 2,000 individually enrolled transmitters †
• Up to 2,000 key codes
• Up to 2,000 telephone directory codes
• 2,500 event log entries per unit
• Up to 8 access time zones
• Up to four PBUS and two Wiegand devices per unit
• † (AM-RRR remote receiver required)

Features

• Full control of 4 doors; each supporting request to exit and door status monitoring
• 2 Wiegand inputs for readers
• Add AM-CRI's for more Wiegand inputs
• Local or remote programming using a PC and AccessBase2000 or through browser with built-in AXNET software
• Remote programming using optional ACM-1 modem (ACP00905)
• Relay auto lock/unlock schedules
• 11.5" W x 12.5" H x 4" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear Commercial Telephone Entry System One Door (AE-100)

Linear AE-100 Commercial Telephone Entry System - One Door

The Model AE-100 Commercial Telephone Entry System - One Door is designed for use as a primary access control device for apartments, condominiums, and offices with up to 125 residents.

The system can be used in a lobby or outside. Surface, recessed, and pedestal mounting options are supported. The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access.

Housed in a locked, rugged stainless steel faced enclosure, the AE-100 features a lighted 12-key telephone style keypad and four operation buttons all with bright, easy-to-see graphics. The backlit two-line directory LCD display scrolls a programmable welcome message and shows the directory Names and Directory Codes.

The system contains a built-in microphone, tamper resistant speaker, and a TTY connector for the hearing impaired. The heavy duty access relay can control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

Multi-lingual display programming prompts and voice help is available with a choice of English, Spanish, French-Canadian, or Portuguese language selection for the system. The system can be programmed locally using the keypad, or remotely with a touch tone telephone.

Up to four AE-100 units can be connected to the same dedicated telephone line to form a simple network. Connecting multiple units allows transferring programming data (either the directory entries only or the entire memory's contents) from the "master" unit to the other sub-units.

Optional features that the AE-100 supports are provisions for postal lock and color CCTV camera installation (Model CCM-1A).

The AE-100 is powered from a 16 VAC plug-in transformer and supports an internal rechargeable 1.2 amp/hour backup battery (not included). The battery charging circuit will support an external backup battery with up to 7 amp/hour capacity.

Applications 

Features

• Many installation choices: surface, recessed, gooseneck
• Stainless steel front panel
• Telephone style keypad with lighting
• Accepts a total of 125 directory listings or stand-alone entry codes
• TTY jack for connection to text communication devices for the hearing impaired
• Simple network capability with up to four units - allows transferring programming data from "master" unit to other sub-units
• Two-line-16-character LCD display
• Removable terminal blocks
• Form "C" access relay rated at 10 amps AC and 7 amps DC @ 30 volts
• Load shed circuitry protects backup battery
• 9.75" W x 11.75" H x 3.5" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear RE-2 Residential Telephone Entry System (RE-2)

Linear RE-2 Residential Telephone Entry System

The Model RE-2N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional color video camera are housed in a rugged enclosure that can be mounted to a pedestal, bolted directly to a wall, or mounted recessed in a wall with the optional trim ring. The die-cast keypad keys have bright, easy-to-read graphics and are lit with overhead lights. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

Operation

Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-2N will acquire the residence's local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-2N by pressing a key on the telephone's keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitor's call.

Call Waiting:

If the resident is using the telephone at the time a visitor calls, the RE-2N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

Call Forwarding:

Programmable call forwarding allows the RE-2N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-2N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

Alternate Numbers:

For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

Local Control:

The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

Access Methods:

Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linear's Model AM-KP keypad can be used as a secondary remote keypad for the RE-2N.

Up to 24 sets of block coded MegaCode® transmitters (up to 100 transmitters total) can be used to gain access through the RE-2N's built-in radio receiver. Each transmitter can be individually suspended or re-activated. One facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-2N.

System Features

Time Zones:

The RE-2N contains an internal clock and calendar. Seven Programmable "time zones" allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the "Do Not Disturb" feature can each be set to only be active during a specific time zone period. Up to ten "holiday" days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

Portal Supervision:

The SENSE/INHIBIT input can be used two ways. If programmed for "door sense", a switch on the door detects forced entry or door ajar situations. If programmed for "inhibit", the input can be wired to a "service" switch or automatic timer that will disable the Relay #1 when required.

Hardwired Activation:

The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-2N case to allow keyed entry for authorized personnel.

Access Security:

The "anti-passback" feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The "keypad lockout" feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

Event Log:

An access log of up to 450 events is stored in the unit's memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-2N's built-in modem.

Local & Remote Programming:

The system's built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The software's graphic display of each of the programming step makes programming easy. Without a computer, the RE-2N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.

Obstacle Detection:

Linear's Model MGT safety edge transmitter is compatible with the RE-2N. This MGT detects and transmits obstacle events to the RE-2N receiver. Obstacle signals from an MGT transmitter will activate Relay #2.

Alarm Interface:

Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.

Voice Synthesizer:

A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

Features

• Powder coated nickel or stainless steel finish
• Downlighting
• User friendly voice prompts
• Two programmable outputs control two openings
• Obstacle reverse, alarm shunt
• Provisions for Knox Box
• Simple to program and maintain through on board keypad, touchtone telephone, or computer with modem
• 450 event memory log
• Supports 100 entry codes; 100 block-coded transmitters
• Built-in 318 MHz superheterodyne radio receiver
• Backup battery ready
• 10" W x 6.25" H x 4" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

Linear RE-1 Residential Telephone Entry System (RE-1)

Linear RE-1 Residential Telephone Entry System

The Model RE-1N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional video camera are housed in a rugged enclosure that can be mounted to a pedestal or bolted directly to a wall. The diecast keypad keys have bright, easy-to-read graphics and are lit with an overhead light. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

Operation

Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-1N will acquire the residence's local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-1N by pressing a key on the telephone's keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitor's call.

Call waiting:

If the resident is using the telephone at the time a visitor calls, the RE-1N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

Call Forwarding:

Programmable call forwarding allows the RE-1N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-1N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

Alternate Numbers:

For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

Local Control:

The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

Access Methods:

Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linear’s Model AM-KP keypad can be used as a secondary remote keypad for the RE-1N.

Up to 24 sets of block coded MegaCode® transmitters (up to 100 transmitters total) can be used to gain access through the RE-1N's built-in radio receiver. Each transmitter can be individually suspended or re-activated. Four facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-1N.

System Features

Time Zones:

The RE-1N contains an internal clock and calendar. Seven programmable time zones allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the Do Not Disturb feature can each be set to only be active during a specific time zone period. Up to ten holiday days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

Portal Supervision:

The SENSE/INHIBIT input can be used two ways. If programmed for door sense, a switch on the door detects forced entry or door ajar situations. If programmed for inhibit, the input can be wired to a service switch or automatic timer that will disable the Relay #1 when required.

Hardwired Activation:

The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-1 case to allow keyed entry for authorized personnel.

Access Security:

The anti-passback feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The keypad lockout feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

Event Log:

An access log of up to 450 events is stored in the unit's memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-1N's built-in modem.

Local & Remote Programming:

The system's built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The software's graphic display of each of the programming step makes programming easy. Without a computer, the RE-1N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.

Obstacle Detection:

Linear's Model MGT safety edge transmitter is compatible with the RE-1N. This MGT detects and transmits obstacle events to the RE-1N receiver. Obstacle signals from an MGT transmitter will activate Relay #2.

Alarm Interface:

Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.

Voice Synthesizer:

A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

Features

• Cast housing stainless steel finish (RE-1SS) or nickel finish (RE-1N)
• Downlighting
• User friendly voice prompts
• Two programmable outputs control two openings
• Obstacle reverse, alarm shunt
• Provisions for Knox Box
• Simple to program and maintain through on board keypad, touchtone telephone, or computer with modem
• 450 event memory log
• Supports 100 entry codes; 100 block-coded transmitters
• Built-in 318 MHz superheterodyne radio receiver
• Backup battery ready
• 6.45" W x 10.81" H x 3.74" D

To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing Access Control Devices

**** The following is just a list of just some of the DoorKing access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your DoorKing access contols repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******

DoorKing DKS812AP

DoorKing DKS1812C

DoorKing DKS1812P

DoorKing DKS1833

DoorKing DKS1834

DoorKing DKS1835

DoorKing DKS1837

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing 1812 Access Plus DKS1812AP

DoorKing 1812 Access Plus

The 1812 Access Plus is PC Programmable and IP Addressible. Each Access Plus Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. With the easy to use Access Plus Account Manager programming software, you can customize the system immediately. The 1812 Access Plus controls a main door or gate and can easily be expanded to control up to six additional access points. The 1812 Access Plus features an upgraded processor, a new high fidelity digital voice circuit, better volume control, a lighted push-button and additional call out telephone numbers (up to 27). Discerning homeowners will appreciate the additional programming, reporting and advanced features found in the 1812 Access Plus system.

DoorKing's Access Plus Account Manager Software is a powerful, flexible and easy to use computer program that allows you to manage access control in a variety of controlled access applications.

To get on our schedule for your Door King gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing 1812 Classic DKS1812C

DoorKing 1812 Classic

Single Family Intercom System.

The model 1812 is a unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessity to pay for an additional telephone line at their home. With its "intercom mode" programming feature, the 1812 can also be connected to a PBX or KSU type system, making it ideal for small businesses to control access through a single door or gate. Visitors are easily identified by voice communication and can be granted or denied access directly from a touch-tone telephone. The 1812 is available in surface, wall and flush mount designs.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing DoorKing 1812 Plus DKS1812P

DoorKing 1812 Plus

Homeowners / Small Apartment / Condo

The 1812 Plus is an updated version of the 1812 Classic and features an upgraded processor, a new high fidelity digital voice circuit, better volume control, a lighted push-button and additional call out telephone numbers (up to 27). This unique communication and access control system allows homeowners to use their existing telephone as an intercom to speak with a guest at a door or gate and is ideal for those applications requiring a basic, single door or gate, access control solution.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing 1833 DKS1833

DoorKing 1833

The Model 1833 is an ideal telephone entry and access control system that is suited for applications that do not require a directory or in applications where a separate directory exists.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1833 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1833 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing 1834 DKS1834

DoorKing 1834

The Model 1834 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button and big A and Z scroll buttons makes this system one of the easiest to use on the market today! For additional security, the 1834 allows you to monitor activity AS IT HAPPENS on your computer display.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing 1835 DKS1835

DoorKing 1835

The Model 1835 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1835 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1835 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

The 1835 is available in three distinct styles: Surface mount, Flush mount and Wall mount. Contact your professional DKS system installer for more information about this and other DKS products.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.

************

S.O.S Gate Opener Repair - Trophy Club Texas

972-814-0489 / 817-590-8008

DoorKing 1837 DKS 1837

DoorKing 1837

The Model 1837 is an ideal telephone entry and access control system suited for medium to large apartment and gated community applications as well as office buildings and industrial sites.

Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The eight-line LCD display features big 1/2-inch characters for easy viewing and your personalized message appears on the screen when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1837 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1837 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.

The 1837 is available in three distinct styles: Surface mount, Flush mount and Wall mount. Contact your professional DKS system installer for more information about this and other DKS products.

To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.