Automatic Gate Opener Repair and Automatic Gate Openers Information
***********
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Gate Opener Repair
We have been an automatic gate opener repair service company here in and around Westlake Texas for over 20 years. Note: Most automatic gate openers are electric gate openers and the two terms can be used interchangably, however there are some rare automatic gate openers that are not electic such as some on cattle ranches that raise up when a truck drives onto a large pressure plate that automatically raises and lowers a gate without electricity. Whether you need automatic swing gate opener repair, automatic sliding gate opener repair, or automatic barrier arm gate opener repair we are the company with experienced automatic gate opener repair technicians that come out with the intent of actually repairing your existing automatic gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our automatic gate opener repair techs are experienced and skilled at repairing all types of automatic gate openers, even the ones that others say that nobody works on. When we come out to do automatic gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic gate opener installs as well if that is what you want, but we do automatic gate opener repair on existing automatic gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do automatic gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Electric Gate Opener Repair
We have been an automatic electric gate opener repair service company here in and around Westlake Texas for over 20 years. Note: All electric gate openers are automatic gate openers and the two terms can be used interchangably whether you are talking about automatic electric gate openers that are AC powered or automatic solar powered gate openers. Whether you need automatic electric swing gate opener repair, automatic electric sliding gate opener repair, or automatic electric barrier arm gate opener repair we are the company with experienced automatic electric gate opener repair technicians that come out with the intent of actually repairing your existing automatic electric gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic electric gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our automatic electric gate opener repair techs are experienced and skilled at repairing all types of automatic electric gate openers, even the ones that others say that nobody works on. When we come out to do automatic electric gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic electric gate opener installs as well if that is what you want, but we do automatic electric gate opener repair on existing automatic electric gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do automatic electric gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your automatic electric gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Driveway Gate Opener Repair
We have been an automatic driveway gate opener repair service company here in and around Westlake Texas for over 20 years. Note: All electric driveway gate openers are automatic driveway gate openers and the two terms can be used interchangably whether you are talking about automatic driveway gate openers that are AC powered or solar powered automatic driveway gate openers. Most automatic driveway gate openers work either single swing driveway gates, double swing driveway gates, or sliding driveway gates, but there are some rare double sliding driveway gates for extreamly wide driveways. Whether you need automatic driveway swing gate opener repair, automatic driveway sliding gate opener repair, or automatic driveway gate opener repair of other types we are the company with experienced automatic driveway gate opener repair technicians that come out with the intent of actually repairing your existing automatic driveway gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic driveway gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our automatic driveway gate opener repair techs are experienced and skilled at repairing all types of automatic driveway gate openers, even the ones that others say that nobody works on. When we come out to do automatic driveway gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic driveway gate opener installs as well if that is what you want, but we do automatic driveway gate opener repair on existing automatic driveway gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do automatic driveway gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your automatic driveway gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Swing Gate Opener Repair
We have been an automatic swing gate opener repair service company here in and around Westlake Texas for over 20 years. Note: Most automatic swing gate openers in residential settings are automatic actuator swing gate openers (the ones with piston type arms) for most automatic driveway swing gates, but some larger residential swing gates or swing gates decorated with woood are heavier than normal and may use the more commercial grade automatic articulating swing gate openers (the ones where the two-part bending arm is attached directly to the top of the ground mounted control box), however there are some light commercial grade automatic actuator swing gate opener options as well. Whether you need single actuator automatic swing gate opener repair, double actuator automatic swing gate opener repair, single articulating automatic swing gate opener repair, or double articulating automatic swing gate opener repair we are the company with experienced automatic swing gate opener repair technicians that come out with the intent of actually repairing your existing automatic swing gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic swing gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our automatic swing gate opener repair techs are experienced and skilled at repairing all types of automatic swing gate openers, even the ones that others say that nobody works on. When we come out to do automatic swing gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic swing gate opener installs as well if that is what you want, but we do automatic swing gate opener repair on existing automatic swing gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do automatic swing gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your automatic swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Sliding Gate Opener Repair
We have been an automatic sliding gate opener repair service company here in and around Westlake Texas for over 20 years. Note: Most automatic sliding gate openers are AC powered, but some do have backup batteries to run the automatic sliding gate opener for a short while when the AC power is out, however it is sometimes possible to get away with runing an automatic sliding gate opener on a solar powered system with larger batteries and higher wattage solar panels. When you need automatic sliding gate opener repair, automatic electric sliding gate opener repair, automatic driveway sliding gate opener repair, or commercial automatic sliding gate opener repair we are the company with experienced automatic sliding gate opener repair technicians that come out with the intent of actually repairing your existing automatic sliding gate opener. Most other companies are mainly new installation companies (some only do certain types of swing gate openers) and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic sliding gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our automatic sliding gate opener repair techs are experienced and skilled at repairing all types of automatic sliding gate openers, even the ones that others say that nobody works on. When we come out to do automatic sliding gate opener repair we do experienced diagnostics and testing with test parts and test equipment to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic sliding gate opener installs as well if that is what you want, but we do automatic sliding gate opener repair on existing automatic sliding gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do automatic sliding gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Barrier Arm Gate Opener Repair
We have been an automatic barrier arm gate opener repair service company here in and around Westlake Texas for over 20 years. When you need automatic barrier arm gate opener repair we are the company with experienced automatic barrier arm gate opener repair technicians that come out with the intent of actually repairing your existing automatic barrier arm gate opener. Most other companies are mainly new installation companies and mainly have the intent of coming out to sell you a whole new system for much more money. Many of these other compainies are good to ok at following the instructions to install a new automatic barrier arm gate opener system, but when it quits working right they are usually not so good at figuring out why its not working and some of the other companies even call us out to assist in figuring out why something they installed before has quit working. Our automatic barrier arm gate opener repair techs are experienced and skilled at repairing many types of automatic barrier arm gate openers. When we come out to do automatic barrier arm gate opener repair we do experienced diagnostics and testing to find out which components are working properly and which are not and recommend the part you need versus someone coming out intent upon replacing all the expensive parts. We can do new automatic barrier arm gate opener installs as well if that is what you want, but we do automatic barrier arm gate opener repair on existing automatic barrier arm gate openers over 95% of time we are called out that saves our customers a lot of money versus paying for a whole new system. For examples and information on the many types and brands we do automatic barrier arm gate opener repair service on just click on our navigation bar to the side or in the table at the top. To get on our schedule for your automatic barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Single Swing Gate Openers:
********** The following is just a small list of some single swing gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your swing gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Apollo Single Automatic Swing Gate Openers:
********** The following is just a small list of some single swing Nice / Apollo automatic gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Apollo automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 1500 Single Swing Gate Operator (1500)
Apollo 1500 Swing Gate Operator
SPECS
- Operates swing gates up to 16', 600 lbs.
- Can be installed on most existing or new swing gates
- Weather resistant
- 12V DC battery, solar or AC rechargeable
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 1500ETL Single Swing Gate Operator (1550ETL)
Apollo 1500ETL Swing Gate Operator
Meets UL325 standard
SPECS
- Operates swing gates up to 16', 600 lbs.
- Can be installed on most existing or new swing gates
- Timer to close option
- Adjustable limits
- Soft Start/Stop Feature
- Weather resistant
- 12V DC battery, solar or AC rechargeable
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 3500ETL Single Swing Gate Operator (3500ETL)
Apollo 3500ETL Swing Gate Operator
Meets UL325 standard
SPECS
- Operates swing gates up to 20', 1000 lbs.
- Post mounted
- Full systems capability
- Continuous duty operation
- Timer to close option
- Adjustable limits
- Innovative new arm design
- Weather resistant
- 12V DC battery, solar or AC rechargeable
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 1500 Swing Gate Operator (1500)
Nice (Apollo) 1500 Swing Gate Operator
636 control board
Apollo 1500 linear actuator for farm and ranch swing gates. 12VDC battery powered, AC or Solar. Open up to 600 lb/16ft gate leaf in 14 to 16 seconds, dependent on gate. Model operates with 636 control board. Kit includes CBOX, 816-1 arm and 318N receiver.
Note: Battery and battery charger or solar panel required for operation, not included. Nice recommends a 30-35Ah battery for AC applications and a 70Ah or larger battery for solar applications.
SPECS
- Duty Cycle Varies based on charging capacity
- Arm Speed 14 - 16 seconds. dependent on gate
- Gate Length up to 16 ft (5 m) leaf
- Gate Capacity 600 lb (272 kg)
- Drive Type Electromechanical
- Voltage Input 12 - 30VDC
- Accessory Power 12VDC
- Temperature Rating -4° to 122° F (-20° to 50° C)
- User Controls 636US board
- Relays n/a
- App Class n/a
- Enclosure CBOX: Type 3R, 18w x 18h x 8d inch ( 46w x 46h x 20.3d cm)
- Finish Type Black powder coat
- Warranty 2 year - *see manufacturer details
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 1550 Swing Gate Operator (1550)
Nice (Apollo) 1550 Swing Gate Operator
936 control board
Apollo 1550 linear actuator for residential, farm and ranch swing gates. 12VDC battery powered, AC or Solar. Open up to 600 lb/16 ft gate leaf in 14 to 16 seconds, slowdown positions adjustable. Model operates with 936 control board. Kit includes CBOX, 816-1 arm, OXI/A receiver and a pair of BlueBUS through beam photo eyes.
Note: Battery and battery charger or solar panel required for operation, not included. Nice recommends a 30-35Ah battery for AC applications and a 70Ah or larger battery for solar applications.
SPECS
- Operator Kit Single: CBOX936 and 816-1
- Twin: CBOX936, 816-1 and 816-2
- Duty Cycle Varies based on charging capacity
- Arm Speed 14 - 16 seconds. Slowdown positions adjustable
- Gate Length up to 16 ft (5 m) leaf
- Gate Capacity 600 lb (272 kg)
- Drive Type Electromechanical
- Voltage Input 12 - 30VDC
- Idle Current 10 mA
- Accessory Power 12VDC and 24VDC 1A each
- Temperature Rating -4° to 122° F (-20° to 50° C)
- User Controls 936US board
- Relays 2 relay outputs
- App Class Usage Class I, II
- Enclosure CBOX: Type 3R, 18w x 18h x 8d inch ( 46w x 46h x 20.3d cm)
- Finish Type Black powder coat
- Warranty 2 year - *see manufacturer details
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 1551 Swing Gate Operator (1551)
Nice (Apollo) 1551 Swing Gate Operator
Versatile: The 1551 swing gate operator with the single/dual advanced 1050 circuit board. Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power. The choice is yours! Easily installed on most existing or new gates.
The ideal solution for special applications: can be used in push to open or pull to open mode, increasing the flexibility of having the actuator inside or outside the gate, regardless of hinge left or right or direction of gate swing. The direct drive system attaches directly to the gate. Quality and durability to corrosion thanks to the housing, weather resistant NEMA 3R. Powder coated black.The actuator has rust proof linear acme screw drive and self-lubricating gears. Supplied with 16 ft. of cable.
FEATURES
- Easy to install
- LCD Display
- Plug-in receiver: up to 1,000 rolling-code transmitters
- 7 day programmable event timer
- Innovative Obstacle Detection System
- Surge Protection
- Programmable Inputs and Outputs
- Advanced Dual Gate Management
- Solar power compatible
- Built in solar regulator
- Corrosion resistant
SPECS
- Power Supply 12-30VDC
- Operating Voltage 12VDC
- Current Draw 10 mA (standby)
- Speed 14-16 Seconds (90 Degrees)
- Duty Cycle Varies based on charging capacity
- Dimensions (Control Box) 18 x 18 x 18 in.
- Dimensions (Actuator) 42" Retracted - 66" Extended
TECHNOLOGY
- Solar Power
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 3501 Swing Gate Operator (3501)
Nice (Apollo) 3501 Swing Gate Operator
The 3501 single swing gate operator using the single/dual advanced 1050 circuit board. For swing gates up to 1,000 lbs weight and 20 ft length each.
Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power. The choice is yours!
Easily installed on most existing or new gates, with practical adjustment of the extension arm and limit switches. The motor’s low profile design allows for compact installation. A 4x4 post with heavy wall tubing is recommended.
Quality and durability with the corrosion resistant housing. Safe, the arm design eliminates major pinch points.
FEATURES
- Easy to install
- LCD Display
- Plug-in receiver: up to 1,000 rolling-code transmitters
- 7 day programmable event timer
- Innovative Obstacle Detection System
- Surge Protection
- Programmable Inputs and Outputs
- Advanced Dual Gate Management
- Solar power compatible
- Built in solar regulator
- Corrosion resistant
SPECS
- Power Supply 12-30VDC
- Operating Voltage 12VDC
- Current Draw 10mA (standby)
- Speed 12-20 Seconds (90 Degrees)
- Duty Cycle Varies based on charging capacity
- Dimensions (Control Box) 18 x 18 x 18 in.
- Dimensions (Chasis) 17.8 x 12 x 8.3 in
TECHNOLOGY
- Solar Power
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 4300 Swing Gate Operator (4300)
Nice (Apollo) 4300 Swing Gate Operator
½ HP, 24 V motor, 120 Vac Swing Gate Operator.
Operator for swing gates up to 600 lbs weight and 16 ft length.
Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.
Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.
Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.
Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard.
Master/slave management: two units synchronized for dual application.
Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.
FEATURES
- 24 V motors, 120 Vac main power.
- 1/2 HP
- Easy to install
- LCD Display
- Plug-in receiver: up to 1,000 rolling-code transmitters
- 7 day programmable event timer
- Innovative Obstacle Detection System
- Surge Protection
- Programmable Inputs and Outputs
- Advanced Dual Gate Management
- Corrosion resistant
SPECS
- Input Power: 120VAC
- Motor 24VDC 1/2HP
- Maximum Speed 1.8 (RPM)
- Opening Speed 12-18 Seconds (90 Degrees)
- Maximum Torque 550 (Nm)
- Size 18.1 L x 18.5 W x 27.5 H
- Weight 150 lbs
TECHNOLOGY
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 4500 Swing Gate Operator (4500)
Nice (Apollo) 4500 Swing Gate Operator
1 HP, 24 V motor, 120 Vac Swing Gate Operator. Operator for swing gates up to 1000 lbs weight and 20 ft length.
Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.
Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.
Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.
Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard.
Master/slave management: two units synchronized for dual application.
Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.
FEATURES
- 24 V motors, 120 Vac main power.
- 1 HP
- Easy to install
- LCD Display
- Plug-in receiver: up to 1,000 rolling-code transmitters
- 7 day programmable event timer
- Innovative Obstacle Detection System
- Surge Protection
- Programmable Inputs and Outputs
- Advanced Dual Gate Management
- Corrosion resistant
SPECS
- Input Power: 120VAC
- Motor 24VDC 1HP
- Maximum Speed 1.8 (RPM)
- Opening Speed 12-18 Seconds (90 Degrees)
- Maximum Torque 850 (Nm)
- Size 18.1 L x 18.5 W x 27.5 H
- Weight 155 lbs
TECHNOLOGY
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
USAutomatic Single Swing Automatic Gate Openers:
********** The following is just a small list of some single swing USAutomatic automatic gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your USAutomatic automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
USAutomatic Patriot Single Swing Gate Operator (Patriot)
USAutomatic Patriot Swing Gate Operator
THE FASTEST OPERATOR FOR SWING GATES UP TO 16 FEET AND 650 LBS EACH LEAF
AC or Solar charged
Backed by a 5 yearcontrol board / 3 year all other components Warranty
Ideal for the installation requiring faster operating speed, proven strength and reliability the Patriot is unmatched in the industry with 14 years of superior performance.
Solar charged gate operators from USAutomatic are the most efficient in the industry.
FEATURES
- Made in the USA
- Warranty: 5 year control board / 3 year - *see manufacturer for details
- all other components
- 2 - LCR 2 button transmitters Included
- Pre-wired solar friendly LCR dual channel receiver
- Same control board for Single, Dual or Slide operator
- Solar or AC charged with solar friendly Smart charge controller
- Designed to operate with all types of solar friendly accessories without adding solar panels
- Independent Gate 1 and Gate 2 sensitivity adjustment
- Soft stop selectable for swing or slide operators
- Battery powered providing real battery backup. Not just a few cycles
- Built in Timer to Close
- Photo Eye Power Management (PEPM) solar friendly software
- For Residential, light commercial, farm and ranch use
- Fast ~12 second cycle time (90 degree opening)
- Danaher 24” linear actuator delivering 500 lbs of dynamic thrust and a static hold load rating of 1000 lbs
- Single or Dual gate compatible
To get on our schedule for your Patriot gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
USAutomatic Ranger Single Swing Gate Operator (Ranger)
USAutomatic Ranger Swing Gate Operator
FOR SWING GATES UP TO 13 FEET AND 400 LBS
• AC or Solar charged
• 3 Year Warranty - * see manufactuer for details
The Ranger series of gate operators is full of innovative design changes and is defining the next generation of low voltage DC gate operators in the industry.
Introducing Quick connect harnesses for all standard components, industry first limit switch technology (patent pending), AC charger included with all operators and external reset.
Linear actuator design allows for mounting in 2 different positions making it easy to hide behind a cross member in the gate which improves the aesthetic appeal.
Ranger solar performance is exceptional and unmatched in the industry, offering up to 65 cycles per day on the standard 6 watt solar panel with a full complement of solar friendly accessories and photo eyes for safety installed.
FEATURES
- Made in the USA
- Warranty 3 years on all components
- 2 - LCR 2 button transmitters Included
- Pre-wired solar friendly LCR dual channel receiver
- Solar or AC charged with solar friendly smart controller
- Designed to operate with all types of solar friendly accessories without adding solar panels
- Independent Gate 1 and Gate 2 sensitivity adjustments
- Battery powered providing real battery backup. Not just 1 cycle
- Built in timer to close
- Photo Eye Power Management (PEPM) solar friendly software
- For residential, light commercial, farm and ranch use
- Danaher 16” Linear actuator delivering 400 lbs of dynamic thrust and a static hold load rating of 1000 lbs
- Single or Dual gate compatible
- Dual gate kit includes water tight junction box and wire nuts with 35 feet of cable.
- Hinged control box cover
- Bolt on kit option is available
To get on our schedule for your USAutomatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster Single Swing Automatic Gate Openers:
********** The following is just a small list of some single swing Liftmaster automatic gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Liftmaster automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA400 Single Swing Gate Operator (LA400)
LiftMaster LA400 Swing Gate Operator
The LA400 has a powerful 24VDC motor, which provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA400 is capable of operating gates up to 16 ft. long and weighing up to 550 pounds (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft).
An on-board radio receiver is included with the LA400. Exclusive from Chamberlain, this provides a single remote control solution for gates and additional access points.
- On-board radio receiver
- Built-in radio receiver
- DC operator system
- Battery-run system
- Slow start/stop
- Inherent obstruction sensing
- External obstruction sensing
- Control inputs
- Bi-part latch
- Timer to close
- LED indicators
- Electronic limit system
- Keyed manual disconnect
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA400DC Primary Linear Actuator Single Swing Gate Operator (LA400DC)
LiftMaster LA400DC Primary Linear Actuator Swing Gate Operator
Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Best in class power management technology extends battery backup for up to 97 days* without recharging, providing greater security and reliability. No one else can offer you that peace of mind.
Connectivity
- MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
- Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
- MyQ Mobile App is a free download with no annual activation fee.
- Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Performance
- Battery Backup safeguards your property by providing up to 400 cycles* or up to 97 days* of standby power when the power is down.
- Solar Ready Ultra Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
- Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
- Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs. (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft)
Safety and Security
- Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
- Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
- UL/cUL Listed tested to the most stringent industry guidelines.
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA400PKGUL 24VDC Linear Actuator Single Swing Gate Operator (LA400PKGUL)
LiftMaster LA400PKGUL 24VDC Linear Actuator Swing Gate Operator
Unrivaled Performance, Safety and Accessibility Exclusively LiftMaster:
Battery Backup Secures and safeguards your property by providing up to 400 cycles or up to 97 days of standby power when the power is down.
Security+2.0® - Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ® - Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors - LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Gate Size - rated for gates up to 16 ft. in length or weighing up to 850 lbs. (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft)
FEATURES
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
- Synchronized Close Simultaneously closes gates.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
- Quick Close closes the gate immediately after a vehicle pulls off the interrupt loop.
- HOMELINK® Compatible Version 4 and higher.
- Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
- Commercial –Duty Cast Aluminum Housing With Heavy-Duty DC Motor Powerful enough to perform in the most demanding applications
- Soft Start/Stop and Mid-Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
- Keyed Manual Disconnect when unlocked, allows gate to be operated manually.
- Inherent Reversing Sensor detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
- Fire Department Compliance allows gate to auto open upon loss of AC power or battery depletion
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
- Party Pass allows for the gates to be held open for an extended period of time, ideal for parties.
SPECIFICATIONS
- Power 24VDC or solar power. 120/230V Single Phase (Standard control box).
- Accessory Power 24VDC 500mA output. Switched and unswitched power.
- Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
- Temperature Specifications -4°F (-20°C) to 140°F (60°C).
- UL Usage Classification I, II, III, and IV.
- Gate Travel Speed 90-degree opening in 15-17 seconds.
CONSTRUCTION
- P3 Motor® 24VDC continuous-duty motor.
- Operator Duty Rating 100 cycles per day.
- Worm Gear Reduction Precision machined all-metal gear drive.
- Operator Weight Actuator arm 19 lbs. Standard control box 13 lbs.
- Includes (2) 7Ah batteries
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA412 Single Swing Gate Operator (LA412)
LiftMaster LA412 Solar Powered Swing Gate Operator
The LA412 is a solar powered residential swing gate operator with EverCharge® Power Management System – it delivers power when needed most for opening the gate and minimizes power consumption at all other times for best solar performance. Its DC motor provides soft start/soft stop operation, which promotes longer gate and operator life, as well as dependable performance. The LA412 is capable of operating gates up to 16 feet long and weighing up to 850 pounds(850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft).
An on-board radio receiver is included with the LA412. Exclusive from Chamberlain®, this provides a single remote control solution for gates, garage doors, and additional access points.
- Solar panel*
NOTE: Additional panels may be required depending on single or dual gate application, geographical location, number of cycles per day, and accessories used. - On-board radio receiver
- DC motor - slow start/stop operation
- Inherent obstruction sensing
- External obstuction sensing
- Control inputs
- Bi-part relay
- Timer-to-close
- LED indicators
- Electronic limit system
- Keyed manual disconnect
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA412DC Solar Primary Linear Actuator Single Swing Gate Operator (LA412DC)
LiftMaster LA412DC Solar Primary Linear Actuator Swing Gate Operator
Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Industry-leading power management technology delivers power when you need it most to operate your gate and minimizes power draw at all other times. Receive up to 126 days* of stand by time without recharging. No other company can offer you that peace of mind.
Connectivity
- MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
- Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
- MyQ Mobile App is a free download with no annual activation fee.
- Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Performance
- Solar Optimized Ultra-Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
- Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
- Gate Size - rated for gates up to 16 ft. in length or weighing up to 850 lbs. (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft)
Safety and Security
- Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
- Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
- UL/cUL Listed tested to the most stringent industry guidelines.
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA412PKGUL 12VDC Solar Linear Actuator Single Swing Gate Operator (LA412PKGUL)
LiftMaster LA412PKGUL Solar Primary Linear Actuator Swing Gate Operator
Solar Model
Secures and safeguards your property by providing a solar charge to the battery-run system for up to 126 days of standby power.Security+2.0®
Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.MyQ ®
Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.P3 Motors
LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
- Synchronized Close Simultaneously closes gates.
- Keyed Manual Disconnect When unlocked, allows gate to be operated manually.
- Inherent Reversing Sensor Detects obstructions or increased loads. Reverses gate when closing or tops/reverses the gate when opening.
- Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion
- Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.
- Commercial-Duty Cast Aluminum Housing With Heavy-Duty DC Motor Powerful enough to perform in the most demanding applications.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Soft Start/Stop and Mid-Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
With optional Expansion board
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt or breaks photo bean. Once vehicle backs up, gate will continure to close.
- Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
Specifications
- Power Solar Powered system accepts up to 30W 12V panels.
- Accessory Power 24VDC 500mA output. Switched and unswitched power.
- Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
- Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).Safety and Security
Construction
- P3 Motor ® 24VDC continuous-duty motor.
- Operator Duty Rating See Solar Daily Cycle Rate Chart by Zone.
- CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
- Worm Gear Reduction Precision machined all-metal gear drive.
- Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
- Operator Weight 206 lbs.
- Actuator Arm Weight 19 lbs.
- Standard Control Box Weight 13 lbs.
- Includes (2) 7Ah batteries.
Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs (850 lbs @ 10 ft, 750 lbs @ 12 ft, 650 lbs @ 14 ft, 550 lbs @ 16 ft).
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster LA500 / LiftMaster LA500DC Linear Actuator Single Swing Gate Operator (LA500DC)
LiftMaster LA500DC Primary Linear Actuator Swing Gate Operator
Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Our industry-leading power management technology extends battery backup for up to 24* days without recharging, providing greater reliability and security. No other company can offer you that peace of mind.
Connectivity
- MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
- Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
- MyQ Mobile App is a free download with no annual activation fee.
- Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Performance
- Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.
- Solar Ready Ultra Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
- Gate Size rated for gates up to 18 ft. in length or weighing up to 1600 lbs (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft).
- Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications.
- Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Safety and Security
- Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
- Quick Close/Anti Tailgate Selectable Feature quickly secures gate and prevents unauthorized access.
- Plug-in Loop Detector Inputs Innovative Design ensures vehicles are easily identified to exit property or interrupt gate travel if a vehicle is in its path.
- Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
- UL/cUL Listed tested to the most stringent industry guidelines.
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA500PKGUL 24VDC Linear Actuator Single Swing Gate Operator (LA500PKGUL)
LiftMaster LA500PKGUL 24VDC Linear Actuator Swing Gate Operator
Connectivity
- Confidently know what’s going on at home with MyQ Technology. It lets you monitor and control your Gate Operator and home lighting from anywhere (when paired with the LiftMaster Internet Gateway).
- Receive email or text alerts so you always know the status of your gate and lighting.
- Get the MyQ mobile app for free. No annual activation fee required.
- Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Performance
- Get on and off your property even when the power’s out with our Battery Backup feature and ultra-efficient Power Management System – up to 500 cycles or 24 days.
- Delivers the performance you need, when you need it with an ultra-reliable Solar Power System.
- Features a Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
- Gate Size rated for gates up to 18 ft. in length or weighing up to 1600 lbs (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft).
Safety and Security
- Never wait for the gate and safely enter your property with Security+2.0™ - patented multi-frequency secure radio technology virtually eliminates interference and offers 2X the range of standard remotes.
- Make sure only one vehicle enters your property at a time with our Quick-Close feature.
- Ensure that vehicles interrupt gate closure if a vehicle is in the gate’s path with our innovative plug-in loop detectors.
- Attach additional safety reversing devices with provided safety inputs. Each entrapment point should be protected with its own device.
- Tested to UL/cUL listed standards to meet the most stringent industry guidelines.
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster LA500XL20W XL Control Box Solar Kit Single Swing Gate Operator (LA500XL20W)
LiftMaster LA500XL20W XL Control Box Solar Kit Single Swing Gate Operator
Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio. Our industry-leading power management technology extends battery backup for up to 24* days without recharging, providing greater reliability and security. No other company can offer you that peace of mind.
Connectivity
- MyQ Technology enables you to securely monitor and control your gate operator and houselights with your smartphone for greater peace of mind.
- Alerts can be received as email or pop-up (push) notifications on your mobile device so that you always know the status of your gate operator.
- MyQ Mobile App is a free download with no annual activation fee.
Performance
- Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.
- Solar Ready Ultra Reliable System delivers power when you need it most to operate the gate and is extremely power efficient at all other times to maximize solar performance. Home owners may qualify for 30% solar tax credit.
- Gate Size rated for gates up to 18 ft. in length or weighing up to 1600 lbs (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft).
- Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications.
- Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Safety and Security
- Security+ 2.0® Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and offers 2X the range of standard remotes so you can access your home quickly and safely.
- Quick Close/Anti Tailgate Selectable Feature quickly secures gate and prevents unauthorized access.
- Plug-in Loop Detector Inputs Innovative Design ensures vehicles are easily identified to exit property or interrupt gate travel if a vehicle is in its path.
- Safety Inputs provided for the addition of safety reversing devices. Each entrapment point should be protected with its own device.
- UL/cUL Listed tested to the most stringent industry guidelines.
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster RSW12U 12VDC Swing Gate Operator (RSW12U)
LiftMaster RSW12U 12VDC Swing Gate Operator
DISCONTINUED BUT STILL REPAIRABLE 8/1/18 NOW RSW12UL
Exclusively LiftMaster:
Battery Backup Secures and safeguards your property by providing up to 146 cycles or up to 24 days of standby power when the power is down.
Security+2.0® Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ® Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
- With optional Expansion Board Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
- Synchronized Close Simultaneously closes gates.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
- Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
- HOMELINK® Compatible Version 4 and higher.
- SECURITY+ 2.0 ® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
- Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Soft Start/Stop and Mid Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Fire Department Compliance allows gate to auto open upon loss of AC power or battery depletion
- Emergency Release Simple-to-use release handle allows gate to be operated manually and maintain limit position once re-engaged.
- Quick Close/Anti-Tailgate quickly secures property, preventing unauthorized access.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
Specifications
- Maximum Gate Weight/Length (400 lbs @ 16 ft, 600 lbs @12 ft, 700 lbs @ 10 ft, 800 lbs @ 8 ft, 1000 lbs @ 6 ft)
- Power 12VDC or Solar Powered.
- Accessory Power 12VDC 500mA output. Switched and unswitched power.
- Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
- Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C).
- With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
- UL Usage Class I, II, III, and IV.
- Gate Travel Speed 90-degree opening in 13-15 seconds.
Construction
- P3 Motor® 12VDC continuous-duty motor.
- Operator Duty Rating 250 cycles per day.
- CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
- Worm Gear Reduction Two commercial oil bath gearboxes providing 900:1 worm gear reduction.
- Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
- Operator Weight 180 lbs.
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster RSW12UL 12VDC Swing Gate Operator (RSW12UL)
LiftMaster RSW12UL 12VDC Swing Gate Operator
RSW12UL features battery backup that provides up to 147 cycles or 63 days of standby power.
Reliable
- Battery Backup provides seamless access by providing standby power when the power is down.
- Solar-Ready, Ultra-Reliable System delivers power when and where you need it.
- Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
- Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
- Warranty 3 years - * see manufactuer for details.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.
Safe and Secure
- Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Emergency Disconnect: simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
- Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
- Quick Close and Anti-Tailgate quickly secure property, preventing unauthorized access (requires optional expansion board).
- UL® Listed gate operators with monitored safety entrapment protection devices.
Included Accessories
- LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
Mechanics
- 12VDC continuous-duty motor
- Operator Duty Rating: 250 cycles per day
- Wormgear Reduction: 2 commercial oil -bath gearboxes providing 900:1 Wormgear reduction
Power
- 115VAC
- Solar-Ready, Ultra-Reliable System delivers power when and where you need it
- Accessory Power: 12VDC 500mA Output
Commercial Grade Design
- Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
- Cover: High-density, UV-resistant polycarbonate 2-piece for excellent heat and corrosion resistance
- UL® Usage Classification: I, II, III and IV
- Operator Weight: 180 lbs.
Dimensions
- Height: 27.99”
- Width: 15.55”
- Depth: 19.63”
- Maximum Gate Weight/Length (400 lbs @ 16 ft, 600 lbs @12 ft, 700 lbs @ 10 ft, 800 lbs @ 8 ft, 1000 lbs @ 6 ft)
Temperature Specifications
- Without Heater: -4°F (-20°C ) to 140°F (60°C)
- With Optional Heater (HTR) -40°F (-40°C ) to 140°F (60°C)
Gate Travel Speed
- Opens 90° in 12-15 seconds
Standard Features
- Inherent Reversing Sensor detects obstruct ions and reverses gate when closing or stops/reverses gate when opening
- Bi-Part Delay monitors and adjusts speed and position of each wing to ensure primary gate closes last
- Synchronized Close simultaneously closes gates
- Monitored Safety Inputs 3 main board, 3 optional expansion board
- Security+ 2.0® On-Board Radio Receiver Tri -band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811lm/813lm)
- Led Diagnostic Display simplifies installation and troubleshooting
- Programmable Auxiliary Relays make adding additional features easy
- Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)
This gate operator qualifies for a 30% tax credit
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CSW24U 24VDC Swing Gate Operator (CSW24U)
LiftMaster CSW24U 24VDC Swing Gate Operator
DISCONTINUED BUT STILL REPAIRABLE 8/1/2018 NOW CSW24UL
Unrivaled Performance, Safety and Accessibility
Exclusively LiftMaster:
Battery Backup Secures and safeguards your property by providing up to 146 cycles or up to 24 days of standby power when the power is down.
Security+2.0® Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ® Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
- Synchronized Close Simultaneously closes gates.
- Pre-Motion Warning Alarm Activates on-board alarm three seconds prior to gate motion.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
- Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
- HOMELINK® Compatible Version 4 and higher.
- SECURITY+ 2.0 ® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
- Engineered For More Than 1 Million Cycles, Our P3 Motoris designed to perform in the most demanding environments.
- Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Soft Start/Stop and Mid Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Fire Department Compliance allows gate to auto open upon loss of AC power or battery depletion
- Quick Close/Anti-Tailgate quickly secures property, preventing unauthorized access.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
Specifications
- Power 120V/230V Single Phase.
- Accessory Power 24VDC 500mA output. Switched and unswitched power.
- Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
- Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).Safety and Security.
- Gate Travel Speed 90-degree opening in 13-15 seconds.
- Maximum Gate Weight/Length (1600 lbs @ 8 ft, 800 lbs @16 ft, 600 lbs @ 18 ft)
Construction
- P3 Motor ® 24VDC continuous-duty motor.
- Operator Duty Rating High-cycle, high-temperature continuous duty.
- CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
- Worm Gear Reduction Two commercial oil bath gearboxes providing 900:1 worm gear reduction.
- Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
- Operator Weight 206 lbs.
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CSW24UL 24VDC Swing Gate Operator (CSW24UL)
LiftMaster CSW24UL 24VDC Swing Gate Operator
CSW24UL features battery backup that provides up to 146 cycles or 24 days of standby power.
Reliable
- Battery Backup provides seamless access by providing standby power when the power is down.
- Smooth Start/Stop Operation and mid-travel reversal extend operator hardware life.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
- Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
- Warranty 5 years commercial, 7 years residential. * See Manufactuer for details.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.
- Synchronized Close simultaneously closes gates.
Safe and Secure
- Security+ 2.0® Safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Emergency Disconnect: simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
- Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
- Quick close and anti-tailgate quickly secure property, preventing unauthorized access.
- UL® Listed Gate operators with monitored safety entrapment protection devices.
Included Accessories:
- LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
Mechanics
- 24VDC Continuous-duty motor
- Operator Duty Rating: high-cycle, high-temperature continuous duty
- Wormgear Reduction: 2 commercial oil-bath gearboxes providing 900:1 Wormgear Reduction
Power
- 120/230VAC Single-Phase
- Optional Kit (3PHCONV) to convert an input voltage of 208/230/460/575VAC to an output voltage of 120VAC
- Accessory Power: 24VDC 500mA Max.
- Solar option available
Commercial Grade Design
- Chassis: Constructed with 1/4 in. gold zinc-plated steel for rust prevention
- Cover: high-density, UV-resistant polycarbonate 2-piece for heat and corrosion resistance
- UL® Usage Classification: I, II, III and IV
- Operator Weight: 206 lbs.
- Maximum Gate Weight/Length (1600 lbs @ 8 ft, 800 lbs @16 ft, 600 lbs @ 18 ft)
Dimensions
- Height: 27.99”
- Width: 19.63”
- Depth: 15.55”
Temperature Specifications
- Without Heater -4°F (-20°C ) to 140°F (60°C)
- With Optional Heater (HTR) -40°F (-40°C ) to 140°F (60°C)
Gate Travel Speed
- Opens 90° in 13-15 seconds
Standard Features
- Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
- Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses gate when opening
- Bi-Part Delay monitors and adjusts speed and position of each wing to ensure primary gate closes last
- Monitored Safety Inputs 3 main board, 3 expansion board
- Security+ 2.0® On-Board Radio Receiver Tri -band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
- Led Diagnostic Display simplifies installation and troubleshooting
- Programmable Auxiliary Relays make adding additional features easy
- Homelink® Compatible Version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle.
- Visit HomeLink.com for additional information.)
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CSW200 AC Swing Gate Operator (CSW200)
LiftMaster CSW200 AC Swing Gate Operator
DISCONTINUED BUT STILL REPAIRABLE 8/1/18 NOW CSW200UL
Exclusively LiftMaster:
Security+2.0®
Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ®
Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors
LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
- Synchronized Close Simultaneously closes gates.
- Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
- Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
- External Alarm Reset Button Instantly resets the built-in safety alarm siren.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close. QUICK CLOSE Closes the gate immediately after a vehicle pulls off the interrupt loop.
- HOMELINK® Compatible Version 4 and higher.
- SECURITY+ 2.0® On-Board Radio Reciever Up to 50 remote controls (unlimited with 811LM/813LM).
- OUR P3 Motor is designed to perform in the most demanding environments.
- Legacy Elite Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Soft Start/Stop and Mid Travel Reversal extends operator and hardware life in high-cycle and heavy-gate applications.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Emergency Release simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
- Quick Close/Anti-Tailgate quickly secures property, preventing unauthorized access.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
Specifications
- Power 110V Single Phase.
- Accessory Power 24VAC, 500mA max.
- Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
- Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With Optional Heater (HTRNB): -40°F (-40°C) to 140°F (60°C).
- UL Usage Classification I, II, III, and IV.
- Gate Travel Speed 90-degree opening in 13-15 seconds.
Construction
- P3 Motor® High-temperature continuous duty motor with class H (high-temperature) insulation is rated for highcycle, high-temperature applications.
- Operator Duty Rating Continuous duty.
- Chassis Same bolt pattern/footprint, constructed with 1/4 in. gold zinc-plated steel for rust prevention.
- Worm Gear Reduction Two commercial oil bath gearboxes providing 900:1 worm gear reduction.
- Cover High-density, 2-piece UV-resistant polyethylene cover.
- Operator Weight 175 lbs.
RECOMMENDED CAPACITIES
- ½ HP – Maximum Gate Weight/Length (1600 lbs @ 8 ft, 1200 lbs @12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft)
- 1 HP – Maximum Gate Weight/Length (2000 lbs @ 12 ft, 1600 lbs @16 ft, 1400 lbs @ 18 ft, 1000 lbs @ 22 ft)
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CSW200UL AC Swing Gate Operator (CSW200UL)
LiftMaster CSW200UL AC Swing Gate Operator
CSW200UL features continuous duty high temperature motor.
Reliable
- Legacy Elite Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
- Warranty 5 years commercial, 7 years residential. * See manufacturer for details.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Wireless Dual-Gate Communication synchronizes gate opening/closing and eliminates expensive driveway trenching costs.
- Synchronized Close simultaneously closes gates.
Safe and Secure
- Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Emergency Disconnect: simple-to-use release handle allows gate to be operated manually and maintain limit position once reengaged.
- Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
- Quick Close And Anti-Tailgate quickly secure property, preventing unauthorized access.
- UL® Listed gate operators with monitored safety entrapment protection devices.
Included Accessories:
- LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
Mechanics
- Continuous-Duty Motor rated for high-cycle, high-temperature applications (available in 1/2 and 1 HP)
- Wormgear Reduction: 2 commercial oil-bath gearboxes providing 900:1 wormgear reduction
Power
- 115V Single-Phase
- Accessory Power: 24VDC 500mA output
- Optional Kit (3PHCONV) to convert an input voltage of 208/240/460/575VAC to an output voltage of 115VAC
Commercial Grade Design
- Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
- Cover: high-density, 2-piece UV-resistant polyethylene cover
- UL® Usage Classification: I, II, III and IV operator weight: 175 lbs.
Dimensions for CSW200501UL
- Height: 28.04”
- Width: 16.37”
- Depth: 19.59”
CSW200501_Capacities
- ½ HP – Maximum Gate Weight/Length (1600 lbs @ 8 ft, 1200 lbs @ 12 ft, 800 lbs @ 16 ft, 600 lbs @ 18 ft)
Dimensions for CSW200101UL
- Height: 27.99”
- Width: 15.20”
- Depth: 24.75”
CSW200101_Capacities
- 1 HP – Maximum Gate Weight/Length (2000 lbs @ 12 ft, 1600 lbs @16 ft, 1400 lbs @ 18 ft, 1000 lbs @ 22 ft)
Temperature Specifications
- Without Heater: -4°F (-20°C ) to 140°F (60°C)
- With Optional Heater: (HTRNB) -40°F (-40°C ) to 140°F (60°C)
Gate Travel Speed
- Opens 90° in 13-15 seconds
Standard Features
- Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
- Bi-Part Delay monitors and adjusts speed and position of each wing to ensure primary gate closes last
- Mechanical Limit System maintains accurate gate position throughout gate travel, even after using manual disconnect
- Monitored Safety Inputs 3 main board, 3 expansion board
- Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811lm/813lm)
- Led Diagnostic Display simplifies installation and troubleshooting
- Programmable Auxiliary Relays make adding additional features easy
To get on our schedule for your Liftmaster gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing Automatic Gate Openers:
********** The following is just a small list of some single swing Viking automaticgate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Viking automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing E4 Gate Operator (Viking E4)
Viking Single Swing E4 Gate Operator
Max Gate Capacity 850 lbs/10' or 550 lbs/16'
Residential DC motor equivalent to 1/3 HP AC motor
High Efficiency Motor - Viking Access Systems has designed a unique high efficiency motor that features built-in high torque, high temperature, and is 100% continuous duty. While meeting the exact requirements needed to open and close your gate, Viking surpasses in engineering.
Water resistant motor
High torque, low current
Complete Manual Release Handle - Providing security and assurance, Viking has provided a lock cover to secure unwanted access to the gate operator. Each lock cover comes with a key designed and provided by Viking Access Systems.
Adjustable Positive Stop Limits - Viking has created an elite system by using the positive stop system, that prevents the gate from over passing the open/close limit or slamming.
Protection - The Viking E4 Swing Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that that chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.
Field Service Repairable - Viking makes repairing an operator as simple as possible. Throwing away an operator after the warranty expires is a thing of the past. Parts can be replaced and repaired onsite, saving time and money for the end user.
Break Away Joint - The Viking Break Away Joint prevents the whole gate operator from obtaining damage beyond repair. If there is a light impact to the gate, the joint will split in two, thus protecting the primary gear drive.*
*WARNING! Sever impact or opposing force can damage other internal parts.
The new E-4™ Residential Swing Gate Operator leads the industry in being the best, most cost effective residential linear arm actuator. This new design allows for a maximum gate capacity of 850 lbs/10’ or 550 lbs/16'. Featuring a convenient manual release handle and pre-wiring for an easy and quick installation. It is ready to be powered with low voltage wiring, allowing installation versatility and accuracy. The E-4™ offers a 2 year residential warranty and UL compliance.
Features
- MAX GATE CAPACITY
850 lbs/10' or 550 lbs/16'
This is the maximum amount of weight and length that the gate operator model can push/pull. - MAX OPERATING SPEED 12 - 16 Seconds per 90°
Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate. - E-4 CONTROL BOARD - New Control Board
1 Board is designed to control a single or dual gate, no other boards necessary - OPERATING TEMP -20°F up to 160°F
The Viking gate Operator will continue to function within this temperature range. - WARRANTY 2 Yr Residential
Please refer to Warranty Policy on the viking website for more information. - STRIKE PROTECTION 10,000 Amps / 20,000 Volts
Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing F1 Gate Operator (Viking F1)
Viking Single Swing F1 Gate Operator
Max Gate Capacity 1500 lbs/12' or 1000 lbs/16'
Residential & Commercial DC motor equivalent to 1/2 HP motor
Quick Release Handle - Viking's Quick Release Handle is ready for any situation. In the event where a gate needs to be open/closed manually, such as power loss, Viking makes it easy and accessible.
V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
- Diagnostic, Voltages, Settings, and Status Display
- Conveniently labeled enclosure
- Ergonomically located
LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthy manual, making troubleshooting quick and efficient.
Multi-layer Corrosion Protection - Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.
- G90 Galvanized
- Clear Zinc Plating
- UV Rated Powder coating
- 1/4" Steel Chassis
Removable Power Supply - Created for convenience, the Patented Viking Removable Power Box can be pulled out from Viking's Gate Operator and mounted near a high voltage line, allowing you to run 24 volts to the opener. This eliminates the need of trenching for high voltage lines and permit fees.
- Convenient fuse access
- LED status indicators
- Convenient power switch
- E-Z access power outlet
- E-Z set-up 120V/240V
- Includes low voltage option
The F-1™ Swing Gate Operator, includes the V-Flex control board and a removable power supply box for low voltage wiring. The removable power supply box allows you to run low voltage to the gate operator rather than high voltage which removes the need to trench high voltage wires. This can save the home or business owner thousands in labor and permit costs.. The V-Flex control board provides a LCD display for diagnostics and operator status. The new 1/4" steel chassis allows an increased handling capacity for gates up to 1500 lbs. The F-1™ operator also features Viking's soft-start / soft-stop, built-in heater and Viking's true battery backup system. Smooth gate operation, compliant to both ETL and UL standards with 5 year commercial or 7 year residential warranty makes the F-1™ operator the ideal choice for your gate automation needs.
Features
- MAX GATE CAPACITY 1500 lbs/12' or 1000 lbs/16'
This is the maximum amount of weight and length that the gate operator model can push/pull. - MAX OPERATING SPEED 13 - 16 Seconds per 90°
Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate. - REMOVABLE POWER SUPPLY
For Remote 24VDC Power Supply
Convenient fuse access, L.E.D. status indicators, power switch, E-Z access power outlet & set-up 115V/230V. - OPERATING TEMP -20°F up to 160°F
The Viking gate Operator will continue to function within this temperature range. - WARRANTY 5 Yr Commercial / 7 Yr Residential
Please refer to Warranty Policy on the viking website for more information. - STRIKE PROTECTION 10,000 Amps / 20,000 Volts
Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing G5 Gate Operator (Viking G5)
Max Gate Capacity 2000 lbs/10' or 800 lbs/18'
Residential & Commercial DC motor equivalent to 1/2 HP AC motor
High Efficiency Motor - Viking Access Systems has designed a unique high efficiency motor that features built-in high torque, high temperature, and is 100% continuous duty. While meeting the exact requirements needed to open and close your gate, Viking surpasses in engineering.
- Water resistant motor
- High torque, low current
Lockable Cover - Providing security and assurance, Viking has provided a lock cover to secure unwanted access to the gate operator. Each lock cover comes with a key designed and provided by Viking Access Systems.
Adjustable Positive Stop for Precision
Protection - The Viking G5 Swing Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that that chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.
Field Service Repairable - Viking makes repairing an operator as simple as possible. Throwing away an operator after the warranty expires is a thing of the past. Parts can be replaced and repaired onsite, saving time and money for the end user.
Break Away Joint - The Viking Break Away Joint prevents the whole gate operator from obtaining damage beyond repair. If there is a light impact to the gate, the joint will split in two, thus protecting the primary gear drive.*
*WARNING! Sever impact or opposing force can damage other internal parts.
The Viking G-5™, leads the industry in linear actuator swing gate operators. This new design boasts a maximum gate capacity of 2000 lbs and 100% duty cycle operation, making it unlike any other. Featuring a convenient electronic manual release switch and pre-wired for easy and quick installation. The G-5™ is now powered by the V-Flex control board, including a speed control dial and diagnostic LCD display. This new design is solar efficient and ready to be powered with low voltage wiring, allowing versatility of installations. The G-5™ offers an increased 3 year commercial or 4 year residential warranty, along with ETL and UL compliance.
FEATURES:
- MAX GATE CAPACITY
2000 lbs/10' or 800 lbs/18' - This is the maximum amount of weight and length that the gate operator model can push/pull.
- MAX OPERATING SPEED
15 - 18 Seconds per 90° - Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
- MAX DUTY CYCLE
100% Continuous Cycle - 100% duty cycle means that you can run your operator 24/7 with absolute confidence.
- OPERATING TEMP
-20°F up to 160°F - The Viking gate Operator will continue to function within this temperature range.
- WARRANTY
3 Yr Commercial / 4 Yr Residential - Please refer to manufactuer for Warranty Policy information.
- STRIKE PROTECTION
10,000 Amps / 20,000 Volts - Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing G5S Solar Gate Operator (Viking G5S)
Max Gate Capacity 1000 lbs/16'
Residential & Commercial DC motor equivalent to 1/2 HP AC motor
LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.
High Efficiency Motor - Viking Access Systems has designed a unique high efficiency motor that features built-in high torque, high temperature, and is 100% continuous duty. While meeting the exact requirements needed to open and close your gate, Viking surpasses in engineering.
- Water resistant motor
- High torque, low current
Lockable Cover - Providing security and assurance, Viking has provided a lock cover to secure unwanted access to the gate operator. Each lock cover comes with a key designed and provided by Viking Access Systems.
Protection - The Viking G5S Swing Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that that chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.
Surge Protection
A true milestone among all gate operators. Although it only requires one 12V battery and one 12V solar panel, the G5S is still a 24VDC motor. This gives you the flexibility of gate length and size for your solar application and allows the G5S a max capacity of 1,000 pounds. Going green has never been easier, weather you are looking for a new opener at your home or ranch, the Viking G5S solar is the best option. This operator comes with a 4 year residential warranty, one of the longest ever offered for a linear arm actuator.
FEATURES:
- MAX GATE CAPACITY
1000 lbs/16' - This is the maximum amount of weight and length that the gate operator model can push/pull.
- MAX OPERATING SPEED
14 - 16 Seconds per 90° - Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
- SOLAR POWER SUPPLY
12 VDC - This is the power voltage needed for the gate operator to function
- OPERATING TEMP
-20°F up to 160°F - The Viking gate Operator will continue to function within this temperature range.
To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing R6 Gate Operator (Viking R6)
Max Gate Capacity 700 lbs/14'
Residential DC motor equivalent to 1/3 HP AC motor
Quick Release Handle - Viking's Quick Release Handle is ready for any situation. In the event where a gate needs to be open/closed manually, such as power loss, Viking makes it easy and accessible.
V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
- Diagnostic, Voltages, Settings, and Status Display
- Conveniently labeled enclosure
- Ergonomically located
LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.
Battery Back-up - Viking's integrated true battery back up system gives you piece of mind, in case of a power loss. Batteries are charged to full capacity and once complete it will automatically stop charging, thus ensuring longer lasting battery life.
The R-6™ Residential Swing Gate Operator, features the V-Flex control board with on-board diagnostics LCD display and new chassis design providing easy viewing of the controls. The R-6™ is also equipped with a built in heater; an on board temperature management system and allows for an increased gate capacity of up to 700 lbs, making it a great option for heavy ornamental gates. Viking’s integrated true battery backup system, convenient fuse access and LED status indicators for incoming high voltage making this the operator of choice for a home owners swing gate application. The R-6™ Swing Gate Operator has a 5 Year residential warranty.
FEATURES:
- MAX GATE CAPACITY
700 lbs/ 14'
This is the maximum amount of weight and length that the gate operator model can push/pull.
- MAX OPERATING SPEED
13 - 16 Seconds per 90°
Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
- UL CLASSIFICATION
Class 1 Residential Only
Operator meets the most current and up to date safety standards.
- OPERATING TEMP
-20°F up to 160°F
The Viking gate Operator will continue to function within this temperature range.
- WARRANTY
5 Yr Residential
Please refer to manufacturer's Warranty Policy for more information.
- STRIKE PROTECTION
10,000 Amps / 20,000 Volts
Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing R6S Solar Gate Operator (Viking R6S)
Max Gate Capacity 700 lbs/ 14'
Residential DC motor equivalent to 1/3 HP AC motor
Quick Release Handle - Viking's Quick Release Handle is ready for any situation. In the event where a gate needs to be open/closed manually, such as power loss, Viking makes it easy and accessible.
V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
- Diagnostic, Voltages, Settings, and Status Display
- Conveniently labeled enclosure
- Ergonomically located
LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.
Built-in Solar Regulator
The R-6™ Solar Swing Gate Operator is perfect for applications where A/C power is not available or economical. The controller has its very own 12 volt power management system to use its solar regulators to its fullest potential. The V-Flex Solar will allow for soft stop and soft start for smooth and accurate operation. The chassis comes with spacious room, enough to fit a 35 amp hour battery without the need to purchase a separate enclosure.
FEATURES
- MAX GATE CAPACITY
700 lbs/ 14'
This is the maximum amount of weight and length that the gate operator model can push/pull.
- MAX OPERATING SPEED
13 - 16 Seconds per 90°
Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
- SOLAR POWER SUPPLY
12 VDC
This is the power voltage needed for the gate operator to function. - OPERATING TEMP
0°F up to 160°F
The Viking gate Operator will continue to function within this temperature range.
- WARRANTY
5 Yr Residential
Please refer to manufacturer's Warranty Policy for more information.
- STRIKE PROTECTION
10,000 Amps / 20,000 Volts
Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Viking Single Swing T21 Gate Operator (Viking T21)
Max Gate Capacity 2000 lbs/ 12' or 1200 lbs/ 20' Residential & Commercial DC motor equivalent to 1 HP AC motor
V-Flex Control Board - This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
- Diagnostic, Voltages, Settings, and Status Display
- Conveniently labeled enclosure
- Ergonomically located
LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.
Multi-layer Corrosion Protection - Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.
- G90 Galvanized
- Clear Zinc Plating
- UV Rated Powder coating
- 1/4" Steel Chassi
Removable Power Supply - Created for convenience, the Patented Viking Removable Power Box can be pulled out from Viking's Gate Operator and mounted near a high voltage line, allowing you to run 24 volts to the opener. This eliminates the need of trenching for high voltage lines and permit fees.
- Convenient fuse access
- LED status indicators
- Convenient power switch
- E-Z access power outlet
- E-Z set-up 120V/240V
- Includes low voltage option
The T-21™ Swing Gate Operator, has a 1/4" steel chassis with multi-layer corrosion protection. This ensures reliable, long-lasting operation in the harshest of environments at your home or business. Built-in heater with thermostat control, 120/240 VAC operation, Viking’s true battery backup and smooth start / stop operation are all standard features in this operator. This powerful swing gate operator has gate capacity of up to 2000 lbs @ 12 ft. The removable power supply box includes LED indicators for your convenience and communicates to the V-Flex™ LCD screen, displaying the status of the AC line, surge protection and fuses of the operator. All Viking operators come with the most robust lightning strike protection built into every machine, offering peace of mind. The T-21™ comes with a 5 year commercial or 7 year residential warranty.
FEATURES
- MAX GATE CAPACITY
2000 lbs/12' or 1200 lbs/20'
This is the maximum amount of weight and length that the gate operator model can push/pull.
- MAX OPERATING SPEED
13 - 16 Seconds per 90°
Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
- REMOVABLE POWER BOX
For Remote 24VDC Power Supply
Convenient fuse access, L.E.D. status indicators, power switch, E-Z access power outlet & set-up 115V/230V.
- OPERATING TEMP
-20°F up to 160°F
The Viking gate Operator will continue to function within this temperature range.
- WARRANTY
5 Yr Commercial / 7 Yr Residential
Please refer to Manufacturer's Warranty Policy for more information.
- STRIKE PROTECTION
10,000 Amps / 20,000 Volts
Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Ram Single Swing Automatic Gate Openers:
********** The following is just a small list of some single swing Ram automatic gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Ram automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Ram 30 Single Swing Gate Operator (Ram 30)
SPECIFICATIONS:
- SINGLE HOME RESIDENTIAL
- MAX GATE SIZE and WEIGHT: 12 foot @ 400 lbs
- GATE TRAVELING SPEED: Approx 90 degree opening in 16 seconds
- CYCLES: 30 per hour
- SHIPPING WEIGHT: 75 lbs
- OPERATING TEMPERATURE: -10° F to 160° F
- Electric Motor: 1/2 HP, 115 VAC, 5.2 Amp, 50/60 Hz
- Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
- Heavy Duty Torque-limiter: Absorbs high impacts on gates to minimize damage on gear reducer
- Finish: Gold/Zinc plated to inhibit corrosion
- Cover: High impact resistant charcoal grey polyethylene
- Cover Dimensions: H: 20" L: 13 1/2" W: 13 1/2"
CONTROL BOARD FEATURES:
- Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)
- Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.
- Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.
- Manual or self adjusting ERD - Settings for emergency reverse sensitivity
- Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration
- Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
- Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.
- Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
- Open & close delays - Adds a 1 second delay on either the open or close cycle.
- Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
- Indicator lights for troubleshooting
- Plug in loop detectors cabability
- Left/Right installation switch
To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Ram 300 Single Swing Gate Operator (Ram 300)
SPECIFICATIONS:
- RESIDENTIAL / COMMERCIAL
- MAX GATE SIZE and WEIGHT: 18 foot @ 800 lbs
- GATE TRAVELING SPEED: Approx 90 degree opening in 14 seconds
- CYCLES: Continuous
- SHIPPING WEIGHT: 110 lbs
- OPERATING TEMPERATURE: -10° F to 160° F
- Electric Motor: 1/2 HP, 115 VAC, 4.5 Amp, continuous duty with high speed ball bearings and resettable overload button
- Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
- Heavy Duty Torque-limiter: Absorbs high impacts on gates to minimize damage on gear reducer
- Foot Pedal Release: Emergency release mechanism disengages the gate from the operator to allow easy manuel opening and closing of the gate during power outages and emergencies
- Finish: Gold/Zinc plated to inhibit corrosion
- Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door
- Cover Dimensions: H: 27" L: 16 1/2" W: 20"
CONTROL BOARD FEATURES:
- Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)
- Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.
- Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.
- Manual or self adjusting ERD - Settings for emergency reverse sensitivity
- Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration
- Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
- Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.
- Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
- Open & close delays - Adds a 1 second delay on either the open or close cycle.
- Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
- Indicator lights for troubleshooting
- Plug in loop detectors cabability
- Left/Right installation switch
To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Low Profile Ram 302 Single Swing Gate Operator (Ram 302)
SPECIFICATIONS:
- RESIDENTIAL / COMMERCIAL
- MAX GATE SIZE and WEIGHT: 18 foot @ 800 lbs
- GATE TRAVELING SPEED: Approx 90 degree opening in 16 seconds
- CYCLES: Continuous
- SHIPPING WEIGHT: 100 lbs
- OPERATING TEMPERATURE: -10° F to 160° F
- Electric Motor: 1/2 HP, 120 VAC, 4.5 Amp, 50/60HZ, continuous duty with high speed ball bearings and resettable overload button
- Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
- Finish: Gold/Zinc plated to inhibit corrosion
- Cover: High impact resistant charcoal grey polyethylene
- Cover Dimensions: H: 16 1/2" L: 23 1/2" W: 13 1/2"
CONTROL BOARD FEATURES:
- Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)
- Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.
- Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.
- Manual or self adjusting ERD - Settings for emergency reverse sensitivity
- Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration
- Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
- Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.
- Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
- Open & close delays - Adds a 1 second delay on either the open or close cycle.
- Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
- Indicator lights for troubleshooting
- Plug in loop detectors cabability
- Left/Right installation switch
To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Ram 3000 Single Swing Gate Operator (Ram 3000)
SPECIFICATIONS:
- COMMERCIAL / INDUSTRIAL
- MAX GATE SIZE and WEIGHT: 22 foot @ 1000 lbs
- GATE TRAVELING SPEED: Approx 90 degree opening in 20 seconds
- CYCLES: Continuous
- SHIPPING WEIGHT: 150 lbs
- OPERATING TEMPERATURE: -10° F to 160° F
- Electric Motor: 1/2 HP, 115 VAC, 4.5 Amp, 50/60HZ, continuous duty with high speed ball bearings and resettable overload button
- Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
- Limit Swiches: Mechanical adjustment for accurate gate stop settings
- Finish: Gold/Zinc plated to inhibit corrosion
- Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door
- Cover Dimensions: H: 28 1/2" L: 23" W: 18"
CONTROL BOARD FEATURES:
- Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)
- Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.
- Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.
- Manual or self adjusting ERD - Settings for emergency reverse sensitivity
- Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration
- Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
- Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.
- Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
- Open & close delays - Adds a 1 second delay on either the open or close cycle.
- Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
- Indicator lights for troubleshooting
- Plug in loop detectors cabability
- Left/Right installation switch
To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Ram 3100 Single Swing Gate Operator (Ram 3100)
SPECIFICATIONS:
- COMMERCIAL / INDUSTRIAL
- MAX GATE SIZE and WEIGHT: 22 foot @ 1200 lbs
- GATE TRAVELING SPEED: Approx 90 degree opening in 20 seconds
- CYCLES: Continuous
- SHIPPING WEIGHT: 150 lbs
- OPERATING TEMPERATURE: -10° F to 160° F
- Electric Motor: 3/4 HP, 115 VAC, 8.5 Amp, 50/60HZ, continuous duty with high speed ball bearings and resettable overload button
- Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
- Limit Swiches: Mechanical adjustment for accurate gate stop settings
- Finish: Gold/Zinc plated to inhibit corrosion
- Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door
- Cover Dimensions: H: 28 1/2" L: 23" W: 18"
CONTROL BOARD FEATURES:
- Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)
- Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.
- Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.
- Manual or self adjusting ERD - Settings for emergency reverse sensitivity
- Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration
- Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
- Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.
- Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
- Open & close delays - Adds a 1 second delay on either the open or close cycle.
- Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
- Indicator lights for troubleshooting
- Plug in loop detectors cabability
- Left/Right installation switch
To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Ram 3030 Single Swing Gate Operator (Ram 3030)
SPECIFICATIONS:
- COMMERCIAL / INDUSTRIAL
- MAX GATE SIZE and WEIGHT: 20 foot @ 3000 lbs
- GATE TRAVELING SPEED: Approx 90 degree opening in 16 seconds
- CYCLES: Continuous
- SHIPPING WEIGHT: 200 lbs
- OPERATING TEMPERATURE: -10° F to 160° F
- Electric Motor 2 Options:
3/4 HP, 115 VAC, 8.5 Amp, 50/60HZ
1 HP, 230 VAC, 4.5 Amp, 50/60HZ
continuous duty with high speed ball bearings and resettable overload button
- Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
- Limit Swiches: Mechanical adjustment for accurate gate stop settings
- Finish: Gold/Zinc plated to inhibit corrosion
- Cover: High impact resistant charcoal grey polyethylene
- Cover Dimensions: H: 27 1/2" L: 23 1/2" W: 17 1/2"
CONTROL BOARD FEATURES:
- Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)
- Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.
- Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.
- Manual or self adjusting ERD - Settings for emergency reverse sensitivity
- Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration
- Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
- Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.
- Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
- Open & close delays - Adds a 1 second delay on either the open or close cycle.
- Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
- Indicator lights for troubleshooting
- Plug in loop detectors cabability
- Left/Right installation switch
To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Ram 3200 Single Swing Gate Operator (Ram 3200)
SPECIFICATIONS:
- COMMERCIAL / INDUSTRIAL
- MAX GATE SIZE and WEIGHT: 22 foot @ 1400 lbs
- GATE TRAVELING SPEED: Approx 90 degree opening in 20 seconds
- CYCLES: Continuous
- SHIPPING WEIGHT: 150 lbs
- OPERATING TEMPERATURE: -10° F to 160° F
- Electric Motor: 1 HP, 230 VAC, 4.5 Amp, 50/60HZ continuous duty with high speed ball bearings and resettable overload button
- Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
- Limit Swiches: Mechanical adjustment for accurate gate stop settings
- Finish: Gold/Zinc plated to inhibit corrosion
- Cover: High impact resistant charcoal grey polyethylene with a stainless steel access door
- Cover Dimensions: H: 28 1/2" L: 23" W: 18"
CONTROL BOARD FEATURES:
- Automatic close timer - Automatically closes the gate after all safety devices are clear. (0-60 seconds)
- Pre warning alarm relays - Allows a siren, buzzer or light to be added to activate for 3 seconds before gate moves.
- Constant warning alarm relays - Allows an alarm or light (not included) to activate while the gate is in motion.
- Manual or self adjusting ERD - Settings for emergency reverse sensitivity
- Dual gate communication cabability - RS485 3-wire cable allows two operators to run together in a master/slave configuration
- Secure close - This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
- Anti-tailgating / One pass system - While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is detected the gate will stop but not reverse, then once the safety is clear the gate will continue to securely close.
- Radio cycle (open, stop, close) - Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
- Open & close delays - Adds a 1 second delay on either the open or close cycle.
- Relay Connections & Service Push Buttons - Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
- Indicator lights for troubleshooting
- Plug in loop detectors cabability
- Left/Right installation switch
To get on our schedule for your Ram gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
GTO Single Swing Automatic Gate Openers:
********** The following is just a small list of some single swing GTO automatic gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your GTO automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
GTO GP-SW050 Single Swing Gate Operator (GTO GP-SW050)
GTO GP-SW050 Single Swing Gate Operator
The GP-SW050 is designed for operation of swing gates.
Max Gate Weight 650 lbs. (295 kg)
Max Gate Length 16 ft. (4.9 m)
For bi-parting dual gates, a second operator is required.
Assumes gate to be free swinging, in good working condition, and on a level plane.
FEATURES:
- Maintenance-Free, 24V brushless DC motor 1/2 HP equivalent.
- AC Powered with inherent UPS (Uninterrupted Power System/Battery Backup) gate operation and all DC powered counters/safety devices.
MECHANICAL:
- 1200:1 direct drive worm gear with totally enclosed gear reduction.
- 100% solid-state motor controls circuitry.
- Operating temp -5 F (-21C) to +160 F (71 C).
- Opening speed to 90 degrees from 15 seconds.
- Weatherproof high density ABS, UV resistant cover.
- Heavy Duty Steel Chassis.
- Operation, diagnostic and safety alarms.
- Inherent obstruction sensing.
- Soft start/soft stop—for long mechanical life expectancy.
- Auto close adjustable 3–120 seconds delay.
ELECTRICAL/POWER:
- Batteries are required (not included): two 12 V DC, U1 230A minimum cold crank amps wired together in series.
- On board 12 V DC power delivers 300 mA for accessories.
- 120 V AC 60 Hz built in power receptacles (1 amp rated).
- GTO’s advanced technology residential control board: — Digital/optical limits with fine adjustment JOG push buttons for easy and accurate setting of limits. — APS (Absolute Position System) tracking system. — On board 3-Push button control station.
- Visual LED and audible diagnostic indicators.
- Plug-in loop detector inputs for exit, shadow, and safety loops.
- Fail Safe or Fail Secure DIP switch selectable for low battery operation.
- 12 V DC, 300mA (.3 Amp), poly fuse protected auxiliary poweroutput.
DIMENSIONS: Height: 33 ̋ Depth: 18 ̋ Width: 15 ̋
SHIPPING WEIGHT: 125 lbs. (57 kg)
WARRANTY: 7 Year Mechanical; 5 Year Electrical (RESIDENTIAL application)
CLASS OF OPERATION: Class I, II, III, IV
SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.
DUAL GATE APPLICATIONS: For dual gate applications, a second operator is required. The GP-SW050 is dual gate capable via communication link wires (22 AWG Type 8761 Belden wire).
To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
GTO PRO-SW2000XL Single Swing Gate Operator (GTO PRO-SW2000XL)
GTO PRO-SW2000XL Single Swing Gate Operator
The PRO-SW2000XL will operate a gate up to 16 ft. (4.9 m) long or weighing 500 lbs. (226.8 kg) per leaf if all proper installation procedures have been followed. Ball bearing hinges should be used on all gates weighing over 250 lbs. (113.4 kg).
FEATURES:
- One button auto-memorization of digital transmitter code.
- Includes battery backup
- 318 MHz RF radio receiver
- Entry transmitter
- AC transformer and all necessary mounting hardware for a post mounted installation
- 8 ̋ (25.4 cm) total offset.
MECHANICAL:
- The GTO/PRO® control board can be programmed for pull-to-open or push-to-open.
- Operating temp -5 F (-21C) to +160 F (71 C).
- Opening time: From 18 to 20 seconds.
- Range of arm stroke: is up to 13 ̋ (33 cm).
- Operator length: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point.
- Operation, diagnostic and safety alarms
- Inherent obstruction sensing.
- Soft start/soft stop—for long mechanical life expectancy.
- Auto close adjustable 3–120 seconds delay.
ELECTRICAL/POWER:
- 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
- Battery charge is maintained by a 120V AC/60 Hz input and 18V AC at 40 VA. output, transformer rectified to 14V DC through control board
- Powered by a reliable 12 Volt (120 Watt) DC motor
- 16:1 planetary gear drive system.
- Charging regulated circuit on control board. “Sleep draw” is 15 mA; “active draw” is 2 to 5 amps.
SHIPPING WEIGHT: 2000XL Kit 31 lbs. (14 kg); 2002XL Kit 52 lbs. (24 kg); Meets UPS shipping standards.
WARRANTY: 2 Year (RESIDENTIAL application)
CLASS OF OPERATION: Class I, II, III, IV
SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.
OPTIONS:
- Solar Power: For dual gates, we recommend a minimum of 10 watts. (FM123) 10-watt Solar Panel Charger: float voltage 14.5 V DC output from a 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
- Dual Gates: The PRO-SW2002XL Kit contains both the master arm and second operator arm with a 32 ft. (9.8m) power cable for a dual gate application.
- Push to Open applications: require one Push-to-Open bracket (349IH) per operator.
To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
GTO PRO-SW3000XL Single Swing Gate Operator (GTO PRO-SW3000XL)
GTO PRO-SW3000XL Single Swing Gate Operator
PRO-SW3000XLSWING GATE OPERATORPRO-SW3000XL-LCBLARGE SMART CONTROL BOX KITThis option comes with a large control box (19 ̋ x 18.25 ̋ x 8.25 ̋/48 cm x 46 cm x 21 cm) that provides room necessary for a large automotive or marine battery.
The PRO-SW3000XL/3200XL series will operate a gate up to 16 ft. (4.9 m) long and weighing 650 lbs. (294.8 kg) each leaf if all proper installation procedures have been followed. Ball bearing hin-ges should be used on all gates weighing over 250 lbs. (113.4 kg).
FEATURES:
- One button auto-memorization of digital transmitter code.
- Includes battery backup
- 318 MHz radio receiver
- Entry transmitter
- AC transformer and all necessary mounting hardware for a post mounted installation
- 12 ̋ (30.5 cm) total offset.
MECHANICAL:
- The GTO/PRO® control board can be programmed for pull-to-open or push-to-open.
- Operating temp -5 F (-21C) to +160 F (71 C).
- Opening time: From 18 to 20 seconds.
- Range of arm stroke: is up to 16 ̋ (41 cm).
- Operator length: with arm fully retracted is 40.25 ̋ (102 cm), mounting point to mounting point.
- Operation, diagnostic and safety alarms
- Inherent obstruction sensing.
- Soft start/soft stop—for long mechanical life expectancy.
- Auto close adjustable 3–120 seconds delay.
ELECTRICAL/POWER:
- 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
- Battery charge is maintained by a 120V AC/60 Hz input and 18V AC at 40 VA. output, transformer rectified to 14V DC through control board
- Powered by a reliable 12 Volt (120 Watt) DC motor
- 16:1 planetary gear drive system.
- Charging regulated circuit on control board. “Sleep draw” is 15 mA; “active draw” is 3 to 7 amps.
SHIPPING WEIGHT: 3000XL Kit 39 lbs. (18 kg); 3200XL 28 lbs. (13 kg); 3000XL w/ LCB 30 lbs + 28 lbs. (14 kg + 12 kg) Meets UPS shipping standards.
WARRANTY: 2 Year (RESIDENTIAL application)
CLASS OF OPERATION: Class I, II, III, IV
SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.
OPTIONS:
- Solar Power: For dual gates, we recommend a minimum of 10 watts. (FM123) 10-watt Solar Panel Charger: float voltage 14.5 V DC output from a 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
- Dual Gates: The PRO-SW3200XL works as a second gate operator when combined with a PRO-SW3000XL. Includes 40 ft. (12.2m) power cable.
- Push to Open applications: require one Push-to-Open bracket (R4388) per operator
To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
GTO PRO-SW4000XL Single Swing Gate Operator (GTO PRO-SW4000XL)
GTO PRO-SW4000XL Single Swing Gate Operator
The PRO-SW4000XL/4200XL series will operate a gate up to 16 ft. (4.9 m) long and weighing 650 lbs. (294.8 kg) each leaf if all proper installation procedures have been followed. Adding the op-tional HB4000 Bracket Set will allow the operation of a gate up to 20 ft. (6.1 m) long and weighing 1000 lbs. (453 kg) each leaf.
FEATURES:
- One button auto-memorization of digital transmitter code.
- Includes battery backup
- 318 MHz RF radio receiver
- Entry transmitter
- AC transformer and all necessary mounting hardware for a post mounted installation
- 17 ̋ (43 cm) total offset.
MECHANICAL:
- The GTO/PRO® control board can be programmed for pull-to-open or push-to-open.
- Operating temp -5 F (-21C) to +160 F (71 C).
- Opening time: from 15 to 18 seconds.
- Range of arm stroke: is up to 22 ̋ (56 cm).
- Operator length: with arm fully retracted is 46.25 ̋ (118 cm),mounting point to mounting point.
- Operation, diagnostic and safety alarms
- Inherent obstruction sensing.
- Soft start/soft stop—for long mechanical life expectancy.
- Auto close adjustable 3–120 seconds delay.
ELECTRICAL/POWER:
- 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
- Battery charge is maintained by a 120V AC/60 Hz input and 18VAC at 40 VA. output, transformer.
- Powered by a reliable 12 Volt (120 Watt) DC motor
- 16:1 planetarygear drive system.
- Charging regulator circuit on control board. “Sleep draw” is 15mA; “active draw” is 5 to 9 amps.
SHIPPING WEIGHT: 4000XL Kit 38 lbs. (21 kg); 4200XL 31 lbs. (16 kg); Meets UPS shipping standards.
WARRANTY: 2 Year (RESIDENTIAL application)
CLASS OF OPERATION: Class I
SAFETY LISTINGS: System Certified with UL325 5th Edition safety standards, ETL listed.
OPTIONS:
- For Larger/Longer Gates (up to 20 ft. and 1000 lbs.):Use Post Mount Hardware Kit (HB4000 Bracket Set). Solar Power: For dual gates, we recommend a minimum of 10 watts. (FM123) 10-watt Solar Panel Charger: float voltage 14.5 V DC output from a 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
- Dual Gates: The PRO-SW4200XL works as a second gate operator when combined with a PRO-SW4000XL. Includes 50 ft. (15.2m) power cable.
- Push to Open applications: require one Push-to-Open bracket per operator. R4388 for PRO-SW4000XL; R4KPTO for PRO-SW4000XL when using HB4000 bracket set for longer, heavier gates.
To get on our schedule for your GTO gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Linear Single Swing Gate Automatic Openers:
********** The following is just a small list of some single swing Linear automatic gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Linear automatic gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Linear PRO-SW2000XLS Single Swing Gate Operator (Linear PRO-SW2000XLS)
Linear PRO-SW2000XLS Single Swing Gate Operator
VOLTS: 12 Volts
Max. Gate Length: 16 feet
Max Gate Weight: 500 lbs
Gate Speed: 15-20 seconds
Common Key Features
- Dual sense technology:- Cost efficient: no need for additional entrapment protection devices
- Quick install: no electrician/welder or photo beams required
- UL 325 compliant
- Easy transmitter programming with the touch of a button
- Soft start / soft stop
- 2-year warranty (residential applications only)
- Solar Compatible
- Includes battery backup
- 318 MHz RF radio receiver
- Entry transmitter
- AC transformer and all necessary mounting hardware
COMMON ELECTRICAL FEATURES
- 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
- Battery charge is maintained by a 120V AC/60 Hz input, 18V AC, 40 VA. output, transformer regulated to 14V DC through control board
- Powered by a reliable 12 Volt (120 Watt) DC motor
- 16:1 planetary gear drive system
- “Sleep draw” is 15 mA
COMMON ENGINEERING FEATURES
- Front mount and scraper seal design
- Rev-counter board with reed switch technology
- Reinstated heavy duty hardware for 1000lb-20 ft gates
- The control board can be programmed for pull-to-open or push-to-open
- Operating temp -5 F (-21C) to +160 F (71 C)
- Opening time: From 15 to 20 seconds
- Range of arm stroke: is up to 15 ̋(33 cm)
- Operator length for 4000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operator length for 3000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operator length for 2000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operation, diagnostic and safety alarms
- Inherent obstruction sensing
- Soft start/soft stop—for long mechanical life expectancy
- Auto close adjustable 3–120 seconds delay
To get on our schedule for your Linear gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Linear PRO-SW3000XLS Single Swing Gate Operator (Linear PRO-SW3000XLS)
Linear PRO-SW3000XLS Single Swing Gate Operator
VOLTS: 12 Volts
Max. Gate Length: 16 feet
Max Gate Weight: 650 lbs
Gate Speed: 15-18 seconds
Common Key Features
- Dual sense technology:- Cost efficient: no need for additional entrapment protection devices
- Quick install: no electrician/welder or photo beams required
- UL 325 compliant
- Easy transmitter programming with the touch of a button
- Soft start / soft stop
- 2-year warranty (residential applications only)
- Solar Compatible
- Includes battery backup
- 318 MHz RF radio receiver
- Entry transmitter
- AC transformer and all necessary mounting hardware
COMMON ELECTRICAL FEATURES
- 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
- Battery charge is maintained by a 120V AC/60 Hz input, 18V AC, 40 VA. output, transformer regulated to 14V DC through control board
- Powered by a reliable 12 Volt (120 Watt) DC motor
- 16:1 planetary gear drive system
- “Sleep draw” is 15 mA
COMMON ENGINEERING FEATURES
- Front mount and scraper seal design
- Rev-counter board with reed switch technology
- Reinstated heavy duty hardware for 1000lb-20 ft gates
- The control board can be programmed for pull-to-open or push-to-open
- Operating temp -5 F (-21C) to +160 F (71 C)
- Opening time: From 15 to 20 seconds
- Range of arm stroke: is up to 15 ̋(33 cm)
- Operator length for 4000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operator length for 3000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operator length for 2000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operation, diagnostic and safety alarms
- Inherent obstruction sensing
- Soft start/soft stop—for long mechanical life expectancy
- Auto close adjustable 3–120 seconds delay
To get on our schedule for your Linear gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Swing Gate Opener Repair - Westlake Texas
817-590-8008
Linear PRO-SW4000XLS Single Swing Gate Operator (Linear PRO-SW4000XLS)
Linear PRO-SW4000XLS Single Swing Gate Operator
VOLTS: 12 Volts
Max. Gate Length: 20 feet
Max Gate Weight: 1000 lbs
Gate Speed: 18-20 seconds
Common Key Features
- Dual sense technology:- Cost efficient: no need for additional entrapment protection devices
- Quick install: no electrician/welder or photo beams required
- UL 325 compliant
- Easy transmitter programming with the touch of a button
- Soft start / soft stop
- 2-year warranty (residential applications only)
- Solar Compatible
- Includes battery backup
- 318 MHz RF radio receiver
- Entry transmitter
- AC transformer and all necessary mounting hardware
COMMON ELECTRICAL FEATURES
- 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
- Battery charge is maintained by a 120V AC/60 Hz input, 18V AC, 40 VA. output, transformer regulated to 14V DC through control board
- Powered by a reliable 12 Volt (120 Watt) DC motor
- 16:1 planetary gear drive system
- “Sleep draw” is 15 mA
COMMON ENGINEERING FEATURES
- Front mount and scraper seal design
- Rev-counter board with reed switch technology
- Reinstated heavy duty hardware for 1000lb-20 ft gates
- The control board can be programmed for pull-to-open or push-to-open
- Operating temp -5 F (-21C) to +160 F (71 C)
- Opening time: From 15 to 20 seconds
- Range of arm stroke: is up to 15 ̋(33 cm)
- Operator length for 4000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operator length for 3000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operator length for 2000XLS: with arm fully retracted is 33.75 ̋ (85.2 cm), mounting point to mounting point
- Operation, diagnostic and safety alarms
- Inherent obstruction sensing
- Soft start/soft stop—for long mechanical life expectancy
- Auto close adjustable 3–120 seconds delay
To get on our schedule for your Linear gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Sliding Gate Openers:
**** The following is just a small list of some automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster Automatic Sliding Gate Openers:
**** The following is just a list of just some of the Liftmaster automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Liftmaster automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster RSL12UL 12VDC Slide Gate Operator (RSL12UL 12VDC)
LiftMaster RSL12UL Slide Gate Operator
RSL12UL features battery backup that provides up to 114 cycles or 63 days of standby power.
Reliable
- Solar-Ready, Ultra-Reliable System delivers power when and where you need it.
- Battery Backup provides seamless access by providing standby power when the power is down.
- Smooth Start/Stop Operation and mid-travel reversal extend operator hardware life.
- Commercial Gear-Driven Transmission provides unsurpassed reliability.
- Warranty 3 years.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Wireless Dual-Gate Communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.
Safe and Secure
- Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Posilock® prevents gate from an unauthorized manual open.
- Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
- Manual Disconnect when unlocked allows gate to be opened manually.
- UL® Listed gate operators with monitored safety entrapment protection devices.
Included Accessories
- LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
- S505AL Monitored Small Profile Resistive Edge pressure-sensitive edge stops and/or reverses gate when obstructed.
Power
- 115VAC
- Solar-Ready, Ultra-reliable System delivers power when and where you need it
- Accessory Power: 12VDC 500mA output
Commercial Grade Design
- Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
- Cover: 1-piece UV-resistant polyethylene cover
- UL® Usage Classification: I, II, III and IV
- Operator Weight: 100 Lbs.
Dimensions
- Height: 23.30”
- Width: 16.24”
- Depth: 16.76”
Temperature Specifications
- Without Heater: -4°F (-20°C) to 140°F (60°C)
- With Optional Heater: (HTR) -40°F (-40°C) to 140°F (60°C)
Gate Travel Speed
- 10” per second
Standard Features
- Synchronized Close simultaneously closes gates
- Quick Close and Anti-Tailgate Quickly secure property, preventing unauthorized access (requires expansion board)
- Inherent Reversing Sensor Detects obstructions and reverses gate when closing or stops/reverses
- Monitored Safety Inputs 3 main board, 3 optional expansion board
- Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
- Led Diagnostic Display simplifies installation and troubleshooting Programmable Auxiliary Relays make adding additional features easy
- Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)
RECOMMENDED CAPACITIES
- Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CSL24UL Slide Gate Operator (CSL24UL)
LiftMaster CSL24UL Slide Gate Operator
CSL24UL features a battery backup that provides up to 208 cycles or 24 days of standby power.
Reliable
- Battery Backup provides seamless access by providing standby power when the power is down.
- Commercial Gear-Driven Transmission provides unsurpassed reliability.
- Smooth start/stop operation and mid-travel reversal extend operator hardware life.
- Warranty 5 years commercial, 7 years residential.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Wireless Dual-Gate Communication synchronizes gate opening/closing and eliminates expensive driveway trenching costs.
Safe and Secure
- Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Quick Close and Anti-Tailgate quickly secures the property, preventing unauthorized access.
- Fire Department Compliance allows gate to auto-open upon loss of ac power or battery depletion.
- Manual Disconnect when unlocked allows gate to be opened manually.
- UL® Listed gate operators with monitored safety entrapment protection devices.
Included Accessories
- LMRRUL Monitored Retro Reflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
- S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.
Mechanics
- 24VDC Continuous duty
- Operator Duty Rating: high-cycle, high-temperature continuous duty
- Wormgear Reduction: Commercial oil-bath gearbox provides 10:1 Wormgear reduction
- Chain: #41 Black Oxide (30ft. Supplied)
Power
- 120/230V single-phase
- Optional Kit (3PHCONV) to convert an input voltage of 208/230/460/575VAC to an output voltage of 120VAC
- Solar-Ready Ultra-Reliable System delivers power when and where you need it
- Accessory Power: 24VDC 500mA output; switched and un-switched power
Commercial Grade Design
- Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
- Cover: high-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance
- UL® Usage Classification: I, II, III, and IV
- Operator Weight: 140 lbs.
Dimensions
- Height: 25.07”
- Width: 15.55”
- Depth: 19.51”
Temperature Specifications When Cold:
- Without heater: -4°F (-20°C)
- With heater: (HTR) -40°F (-40°C)
Temperature Specifications When Hot:
- Without heater: 140°F (60°C)
- With heater: (HTR) 140°F (60°C)
Gate Speed
- 12” per second
Standard Features:
- Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses gate when opening
- Posilock® automatically closes the gate when it is pushed from the closed limit
- Monitored Safety Inputs 3 main board, 3 expansion board
- Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
- Led Diagnostic Display simplifies installation and troubleshooting
- Programmable Auxiliary Relays make adding additional features easy
- Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL3000UL Slide Gate Operator (SL3000UL)
LiftMaster SL3000UL Slide Gate Operator
AC High - Traffic Commercial Slide Gate Operator
CONTINUOUS-DUTY, High-Temperature Motor
The SL3000UL models of slide gate operators are the first choice for heavy-traffic applications and high-demand customers, including large development and management companies, prestigious residential gated communities, and custom home builders.
Featuring the highest quality components and backed by years of proven reliability, each unit is carefully inspected and mechanically tested to provide unsurpassed performance. Unique engineering innovations ensure than any SL3000UL™ model will meet the needs of almost every type of high-traffic gated entrance. All backed by the safety and reliability of the most advanced control board in the industry.
Reliable
- Legacy elite heavy-duty commercial gear-driven transmission provides unsurpassed reliability.
- Limit switch design provides precision limit accuracy and reliability.
- Surge suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
- Warranty 5 years commercial, 7 years residential.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Wireless dual-gate communication synchronizes gate opening/ closing and eliminates expensive driveway trenching costs.
Safe and Secure
- Security+ 2.0® Safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Inherent reversing sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
- Pre-motion warning alarm activates on-board alarm 3 seconds prior to gate motion.
- Manual disconnect when unlocked allows gate to be operated manually.
- Quick close and anti-tailgate quickly secure property, preventing unauthorized access.
- UL® Listed Gate operators with monitored safety entrapment protection devices.
Mechanics
- Continuous-Duty Motor with Class H Insulation is rated for high-cycle, high-temperature applications (available in 1/2 and 1 HP)
- Operator Duty Rating: Continuous Duty
- Wormgear Reduction: Commercial oil-bath gearbox providing 30:1 Wormgear Reduction
- Chain: #41 Black Oxide (25ft. Supplied)
Power
- 115V Single-Phase
- Accessory Power: 24VDC 500mA output
- 2 Auxiliary Outlets
- Optional Kit (3PHCONV) to convert an input voltage of 208/240/480/575VAC to an output Voltage of 115VAC
Commercial-Grade Design
- Chassis: constructed with 1/4 in. gold zinc-plated steel for rust prevention
- Cover: High-Density, UV-Resistant , 1-Piece Polyethylene plastic for excellent heat and corrosion resistance
- UL® Usage Classification: I, II, III and IV
- Operator weight: 140 lbs.
Dimensions
- Height: 26.51”
- Width: 18.14”
- Depth: 20.39”
Gate Capacities
- 1/2 HP Motor - Gates up to 50ft long or 1000 lbs
- 1 HP Motor - Gates up to 50 ft or 2000 lbs
Temperature Specifications
- Without heater: -4°F (-20°C ) to 140°F (60°C
- With optional heater: (HTRNB) -40°F (-40°C ) to 140°F (60°C)
Gate Travel Speed
- 12” per second
Standard Features
- External Alarm Reset Button instantly resets the built in safety alarm siren
- Mechanical Limit System maintains accurate gate position throughout gate travel, even after using manual disconnect
- Monitored Safety Inputs 3 main board, 3 expansion boards
- Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
- Led Diagnostic Display simplifies installation and troubleshooting
- Programmable Auxiliary Relays make adding additional features easy
- Homelink® Compatible version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)
The SL3000UL gate operator is available in the following models:
*SL3000UL: standard model
*SL3000ULDC: equipped with battery backup
*SL3000ULDM: dual motor for heavier traffic and higher temperatures
*SL3000ULE: capable of manual backdrive for emergency access
*SL3000UL1HP: heavy-duty, 1 horsepower model for heavier gates
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL585UL AC Slide Gate Operator (SL585UL AC)
LiftMaster SL585UL AC Slide Gate Operator
SL585UL features a heavy- duty industrial lockable metal cover.
Reliable
- Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
- Warranty 2 years.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Universal Footprint simplifies retrofit applications by adapting to preexisting pads.
- Homelink® Compatible (version 4.0 and higher).
Safe and Secure
- Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Manual Disconnect when unlocked allows gate to be operated manually.
- Quick Close and Anti-tailgate quickly secure property, preventing unauthorized access.
- Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
- Automatic Solenoid Brake prevents the gate from being back driven.
Included Accessories
- LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
- S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.
Mechanics
- High-Starting Torque continuous-duty motor (available in 1/2, 1 and 1 1/2 HP)
- Operator Duty Rating: 20 cycles per hour
- Wormgear Reduction: 20:1 Wormgear Reducer
- Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
- Chain: #50 nickel-plated (25ft. supplied)
Power
- 115/208/230VAC Single-Phase or 208/230/460/575vac 3-phase (575v includes factory-installed heater) (Specify when ordering)
- Accessory Power: 24VDC 500mA Max.
- Dual -Voltage Connections: increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements.
Commercial-Grade Design
- Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments
- Cover /Frame: weather-resistant, lockable, 16-gauge steel ; 7-gauge pre-galvanized steel frame
- UL® Usage Classification: I, II, III and IV
- Operator Weight: 240 lbs.
Dimensions
- Height: 38.02”
- Width: 30.63”
- Depth: 17.30”
Recommended Capacities by Motor Size:
- 1/2 HP - 1000 Lbs Max, 45 Ft Max Width for Overhead or V-Groove Gates, 25 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
- 1 HP - 1600 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
- 1 1/2 HP - 1900 Lbs Max, 75 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
Temperature Specifications
- Without heater: -4°F (-20°C) to 140°F (60°C)
- With optional heater: (HTRNB—HTR460 for 460V operators) 40°F (-40°C) to 140°F (60°C)
Gate Travel Speed
- 11” per second
Standard Features
- External Alarm Reset Button: instantly resets the built-in safety alarm siren
- Mechanical Limit System: maintains accurate gate position throughout gate travel, even after using manual disconnect
- Monitored Safety Inputs: 3 main board, 3 expansion board
- Security+ 2.0® On-Board Radio Receiver: Tri-Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
- Led Diagnostic Display: simplifies installation and troubleshooting
- Programmable Auxiliary Relays: make adding additional features easy
- Homelink® Compatible: version 4.0 or higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL595UL AC Slide Gate Operator (SL595UL AC)
LiftMaster SL595UL AC Slide Gate Operator
SL595UL features a heavy-duty industrial lockable metal cover.
Reliable
- Commercial gear-driven transmission provides unsurpassed reliability.
- Heavy-Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
- Warranty 2 years.
Smart
- MyQ® Technology enables you to securely control and monitor your gate operator from anywhere.
- Simplified Mounting and Wiring Routing for easier installations.
Safe and Secure
- Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
- Manual Disconnect when unlocked allows gate to be operated manually.
- Quick Close and Anti-tailgate quickly secure property, preventing unauthorized access.
- Inherent Reversing Sensor detects obstructions and reverses gate when closing or stops/reverses the gate when opening.
- Mechanical Braking System: this solenoid-actuated brake system adds substantial gate position control at all points in travel and prevents the gate from being back driven.
Included Accessories
- LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflective photo eye now with heater and wider polarized beam, engineered to stay aligned; max. Range: 50 ft.
- S505AL Monitored Small Profile resistive edge pressure-sensitive edge stops and/or reverses gate when obstructed.
Mechanics
- High-Starting Torque continuous-duty motor (available in 1, 1 1/2 and 2 HP)
- Operator Duty Rating: 25 Cycles per Hour
- Wormgear Reduction: 20:1 Wormgear reducer
- Mechanical Limit System: maintains accurate gate position throughout travel, even after using manual disconnect
- Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
- Chain: #50 nickel-plated (25ft. supplied)
Power
- 115/208/230VAC Single-Phase or 208/230/460/575vac 3-phase (575v includes factory-installed heater) (Specify when ordering)
- Accessory Power: 24VDC 500mA Max.
- Dual -Voltage Connections: increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements
Commercial-Grade Design
- Metal Frame: 7-gauge pre-galvanized steel
- Maximum Run Timer: protects against damage to the gate and operator by limiting the unit’s run time to 120 seconds
- Cover: powder-coated, pre-galvanized 16-gauge steel oil -tight, weatherproof NEMA 3R lockable cabinet
- UL® Usage Classification: I, II, III and IV
- Operator Weight: 270 lbs.
Dimensions
- Height: 30.08”
- Width: 27.45”
- Depth: 17.14”
Recommended Capacities
- 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
- 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
- 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
Temperature Specifications
- Without heater: -4°F (-20°C) to 140°F (60°C)
- With optional heater: (HTRNB—HTR460 for 460V operators) 40°F (-40°C) to 140°F (60°C)
Gate Travel Speed
- 12” per second
Standard Features
- Pre-Motion Warning Alarm activates on-board alarm 3 seconds prior to gate motion
- External Alarm Reset Button instantly resets the built - in safety alarm siren
- Monitored Safety Inputs 3 main board, 3 expansion board
- Security+ 2.0® On-Board Radio Receiver Tri -Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)
- Led Diagnostic Display Programmable Auxiliary Relays make adding additional features easy
- Homelink® Compatible version 4.0 or Higher (May require an external adapter depending on the model and year of your vehicle. Visit HomeLink.com for additional information.)
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster RSL12U 12VDC Slide Gate Operator (RSL12U 12VDC)
LiftMaster RSL12U 12VDC Slide Gate Operator
THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE RSL12UL
Unrivaled Performance, Safety and Accessibility
Exclusively LiftMaster:
Battery Backup
- Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.
Security+2.0®
- Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ®
- Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors
- LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
- POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
- Synchronized Close Simultaneously closes gates.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
- Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
- HOMELINK ® Compatible Version 4 and higher.
- Security+ 2.0® On-Board Radio Reciever Up to 50 remote controls (unlimited with 811LM/813LM).
- Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Soft Start/Stop and Mid-Travel Reversal Extends operator and hardware life in high-cycle and heavy-gate applications.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Lockable Manual Disconnect When unlocked allows gate to be operated manually.
- Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion.
- Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
- Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.
Specifications
- Power 12VDC or solar powered.
- Accessory Power 12VDC 500mA output. Switched and unswitched power.
- Monitored Safety Inputs 3 Main Board, 3 Optional Expansion Board.
- Temperature Specifications
- Without Heater: -4°F (-20°C) to 140°F (60°C).
- With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
- UL Usage Classification I, II, III, and IV.
- Gate Travel Speed 10 in. per second.
Construction
- P3 Motor 12VDC continuous-duty motor.
- Operator Duty Rating 120 cycles per day.
- Chassis Constructed with 1/4 in. gold-zinc plated steel for rust prevention.
- Worm Gear Reduction Commercial oil bath gearbox with 12:1 worm gear reduction.
- Cover 1-piece UV-resistant polyethylene cover.
- Operator Weight 100lbs.
RECOMMENDED CAPACITIES
- Rated for gates up to 25 ft in length MAX or weighing up to 800 lbs MAX.
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CSL24U 24VDC Slide Gate Operator (CSL24U 24VDC)
LiftMaster CSL24U 24VDC Slide Gate Operator
THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE CSL24UL
Unrivaled Performance, Safety and Accessibility
Exclusively LiftMaster:
Battery Backup
- Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.
Security+2.0®
- Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ®
- Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors
- LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Solar-Ready Ultra-Reliable System Simple solar conversion delivers power when you need it most and is extremely power efficient at all other times to maximize solar performance.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- POSILOCK® Automatically powers the operator and returns a gate to the closed position when gate is pushed off of closed limit.
- Pre-Motions Warning Alarm Activates onboard alarm three seconds prior to gate motion.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
- Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
- HOMELINK®Compatible Version 4 and higher.
- SECURITY+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
- Engineered For More Than 1 Million Cycles, Our P3 Motor is designed to perform in the most demanding environments.
- Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Soft Start/Stop Extends operator and hardware life in high-cycle and heavy-gate applications.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Keyed Manual Disconnect When unlocked allows gate to be operated manually.
- Fire Department Compliance Allows gate to auto open upon loss of AC power or battery depletion
- Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
- Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.
Specifications
- Power 120V/230V Single Phase.
- Accessory Power 24VDC 500mA output. Switched and unswitched power.
- Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
- Temperature Specifications
- Without Heater: 4°F (-20°C) to 140°F (60°C).
- With Optional Heater (HTR): -40°F (-40°C) to 140°F (60°C).
- UL Usage Classification I, II, III, and IV.
- Gate Travel Speed 12 in. per second.
Construction
- P3 Motor® 24VDC continuous-duty motor.
- Operator Duty Rating High-cycle, high-temperature continuous duty.
- CHASSIS Constructed with 1/4 in. gold zinc-plated steel for rust prevention.
- Worm Gear Reduction Commercial oil bath gearbox providing 10:1 worm gear reduction.
- Cover High-density, UV-resistant polycarbonate 2-piece cover for excellent heat and corrosion resistance.
- Operator Weight 140 lbs.
RECOMMENDED CAPACITIES
- Rated for gates up to 50 ft. in length or weighing up to 1,500 lbs.
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL3000U Slide Gate Operator (SL3000U)
LiftMaster SL3000U Slide Gate Operator
AC High - Traffic Commercial Slide Gate Operator
THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE, THE NEW MODEL IS THE SL3000UL
Unrivaled Performance, Safety and Accessibility
Exclusively LiftMaster:
Battery Backup
- Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.
Security+2.0®
- Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ®
- Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors
- LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Dual Voltage Connections Eliminates expensive conduit costs and unsightly driveway scars.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
- Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
- External Alarm Reset Button Instantly resets the built-in safety alarm siren.
- Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
- Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
- Homelink® Compatible Version 4 and higher.
- SECURITY+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
- Our P3 Motor is designed to perform in the most demanding environments.
- Legacy Elite Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Manual Disconnect When unlocked allows gate to be operated. Connect to optional Fire Department Box to meet local fire code.
- Inherent Reversing Sensor Detects obstructions or increased loads. Reverses gate when closing or stops/reverses the gate when opening.
- Quick Close/Anti-Tailgate Quickly secures property, preventing unauthorized access.
- Surge Suppression Provides industrial surge and lightning protection against strikes up to 50 feet away.
- Limit Switch Design Provides precision limit accuracy and reliability.
Specifications
- Power 110V Single Phase.
- Accessory Power 24VDC, 500mA output. Switched and unswitched power.
- Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
Temperature Specifications
- Without Heater: -4°F (-20°C) to 140°F (60°C).
- With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C).
- UL Usage Classification I, II, III, and IV.
- Gate Travel Speed 12 in. per second.
Construction
- P3 Motor® High temperature continuous duty motor with class H (high-temperature) insulation is rated for high-cycle, high temperature applications.
- Operator Duty Rating Continuous duty.
- Chassis Same bolt pattern/footprint - Constructed with 1/4 in. gold zinc plated steel for rust/corrosion prevention.
- Worm Gear Reduction Commercial oil bath gearboxes with 30:1 wormgear reduction.
- Cover High-density UV resistant one piece polyethylene plastic for excellent heat and corrosion resistance.
- Operator Weight 140 lbs.
Recommended Capacities
- 1 HP Rated for gates up to 37 ft. in length or weighing up to 2,000 lbs.
- 1/2 HP Rated for gates up to 37 ft. in length or weighing up to 1,000 lbs.
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL585U AC Slide Gate Operator (SL585U AC)
LiftMaster SL585U AC Slide Gate Operator
DISCONTINUED 8/1/2018 NOW SL585UL
Unrivaled Performance, Safety and Accessibility
Exclusively LiftMaster:
Battery Backup
- Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.
Security+2.0®
- Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ®
- Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors
- LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Dual Voltage Connections Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements. Voltage is selectable within phases at the time of installation with the placement of a connector.
- Single Phase: 115V, 208V and 230V
- 3 Phase: 208V, 230V and 460V
- 3 Phase: 575V is a discrete model without field-selectable voltage. Includes factory installed heater.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
- Mechanical Braking System Adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
- Maximum Run Timer Protects against damage to the gate and operator by limiting the unit’s runtime to 120 seconds.
- External Alarm Reset Button Allows for quick reset of the gate operator when the alarm has been activated.
- Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close.
- Homelink® Compatible Version 4 and higher.
- Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
- Our P3 Motor is designed to perform in the most demanding environments.
- Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Lockable Manual Disconnect when unlocked allows gate to be operated.
- Lockout/Tagout Feature prevents power from being switched on. Safeguards workers from high-voltage power.
- Heavy Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
Specifications
- Power 115/208/230 VAC. Single Phase. 208/230/460/575 VAC. 3 Phase.
- Accessory Power 24VDC, 500mA max.
- Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
- Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C). UL Usage Classification I, II, III, and IV.
- Gate Travel Speed 11 in. per second.
Construction
- P3 Motor® High starting torque continuous-duty motor.
- Operator Duty Rating 25 cycles per hour.
- Metal Frame 7-gauge pre-galvanized steel.
- Worm Gear Reduction 20:1 worm gear reducer.
- Chain #50 nickel-plated (25 ft. supplied).
- Cover Powder-coated, pre-galvanized 16-gauge steel oil tight, weatherproof NEMA 3R lockable cabinet.
- Operator Weight 240 lbs.
Recommended Capacities by Motor Size:
- 1/2 HP - 1000 Lbs Max, 45 Ft Max Width for Overhead or V-Groove Gates, 25 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
- 1 HP - 1600 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
- 1 1/2 HP - 1900 Lbs Max, 75 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 20 Cycles/Hr.
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL595U AC Slide Gate Operator (SL595U AC)
LiftMaster SL595U AC Slide Gate Operator
DISCONTINUED 8/1/18 NOW SL595UL
Unrivaled Performance, Safety and AccessibilityExclusively LiftMaster:
Battery Backup
- Secures and safeguards your property by providing up to 114 cycles or up to 63 days of standby power when the power is down.
Security+2.0®
- Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used.
MyQ®
- Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app.
P3 Motors
- LiftMaster has designed its own purpose built motor to meet the exact requirements needed to open and close your gate.
Features
- LED Diagnostic Display Simplifies installation and troubleshooting.
- Dual Voltage Connections Increase flexibility by enabling the installer to select the required voltage, within phase, to meet job-site requirements. Voltage is selectable within phases at the time of installation with the placement of a connector.
- Single Phase: 115V, 208V and 230V
- 3 Phase: 208V, 230V and 460V
- 3 Phase: 575V is a discrete model without field-selectable voltage. Includes factory installed heater.
- Programmable Auxiliary Relays Easily add additional features, such as warning lights/alarms.
- Mechanical Limit System Maintains accurate gate position throughout gate travel, even after using manual disconnect.
- Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
- Mechanical Braking System Adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
- Maximum Run Timer Protects against damage to the gate and operator by limiting the unit’s runtime to 120 seconds.
- External Alarm Reset Button Allows for quick reset of the gate operator when the alarm has been activated.
- Adjustable Friction Clutch Helps to protect gate and operator from damage should the door meet an obstruction.
- Anti-Tailgate Prevents unauthorized access. Gate will pause when closing as vehicle pulls onto interrupt loop or breaks photo beam. Once vehicle backs up, gate will continue to close. Quick Close Closes the gate immediately after a vehicle pulls off the interrupt loop.
- Homelink® Compatible Version 4 and higher.
- Security+ 2.0® On-Board Radio Receiver Up to 50 remote controls (unlimited with 811LM/813LM).
- The P3 Motor is designed to perform in the most demanding environments.
- Heavy-Duty Commercial Gear Driven Transmission Provides unsurpassed reliability.
- Wireless Dual-Gate Communication Eliminates expensive conduit costs and unsightly driveway scars.
- Manual Disconnect when unlocked allows gate to be operated.
- Lockout/Tagout Feature prevents power from being switched on. Safeguards workers from high-voltage power.
- Heavy Duty Steel Lockable NEMA 3R Enclosure oil-tight, weatherproof cabinet withstands extreme and harsh environments.
- Surge Suppression provides industrial surge and lightning protection against strikes up to 50 feet away.
Specifications
- Power 115/208/230 VAC. Single Phase. 208/230/460/575 VAC. 3 Phase.
- Accessory Power 24VAC, 500mA max.
- Monitored Safety Inputs 3 Main Board, 3 Expansion Board.
- Temperature Specifications Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C).
- UL Usage Classification I, II, III, and IV.
- Gate Travel Speed 12 in. per second.
Construction
- P3 Motor® High starting torque continuous-duty motor.
- Operator Duty Rating 25 cycles per hour.
- Metal Frame 7-gauge pre-galvanized steel.
- Worm Gear Reduction 20:1 worm gear reducer.
- Chain #50 nickel-plated (25 ft. supplied).
- Cover Powder-coated, pre-galvanized 16-gauge steel oil tight, weatherproof NEMA 3R lockable cabinet.
- Operator Weight 270 lbs.
Recommended Capacities
- 1 HP - 1700 Lbs Max, 70 Ft Max Width for Overhead or V-Groove Gates, 35 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
- 1 1/2 HP - 2100 Lbs Max, 80 Ft Max Width for Overhead or V-Groove Gates, 40 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
- 2 HP - 2500 Lbs Max, 90 Ft Max Width for Overhead or V-Groove Gates, 45 Ft Max With for Cantilever Gates, 25 Cycles/Hr.
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL575 Slide Gate Operator (SL575)
LiftMaster SL575 Slide Gate Operator
THIS UNIT WAS DISCONTINUED BUT IS STILL REPAIRABLE
The LiftMaster® SL575 is a reliable continuous-duty operator for use on heavy-gate applications in commercial and light industrial locations. This resilient operator offers many standard features such as dual gate operation, sequenced access management, diagnostic LEDs, and more. The SL575 supports gate lengths up to 50 feet and gate weights up to 1,800 pounds, making it ideal for commercial and light industrial installations.
*Built-in 312HM radio receiver
*Universal footprint
*Larger control box
*Integrated 3-button control station
*Large accessory tray
*External manual disconnect
*External reset button
*Self-locking drive
*Inherent obstruction sensing
*External obstruction sensing
*Advanced dual gate operation
*Sequenced access management
*Digital logic control
*LED indicators
*Warning device
*Loop detector inputs
*Timer to close
*Maximum run timer
*Emergency stop button
*Maglock control
*Control inputs
*Mechanical braking
*Limit settings
*Surge & spike protection
*Hinged access cover
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
****************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL585 Slide Gate Operator (SL585)
LiftMaster SL585 Slide Gate Operator
THIS UNIT WAS DISCONTINUED in 2018 BUT IS STILL REPAIRABLE
The LiftMaster® SL585 is a durable heavy-duty gear-driven operator for use on heavy gates and high-cycle applications such as gated communities and industrial locations. The powerful design supports gate lengths up to 70 feet and gate weights up to 1,600 pounds. A strong powder-coated galvanized steel chassis, all-weather gearbox, as well as a weather-resistant, lockable cover ensure years of rugged and reliable performance. This model is ideal for heavy commercial and industrial installations and is UL325-compliant.
*Built-in radio receiver
*Universal footprint
*Larger control box
*Integrated 3-button control station
*Large accessory tray
*External manual disconnect
*External reset button
*Inherent obstruction sensing
*External obstruction sensing
*Advanced dual gate operation
*Sequenced access management
*Digital logic control
*LED indicators
*Warning device
*Loop detector inputs
*Timer to close
*Maximum run timer
*Emergency stop button
*Maglock control
*Control inputs
*Mechanical braking
*Limit settings
*Surge & spike protection
*Hinged access cover
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster SL595 Slide Gate Operator (SL595)
LiftMaster SL595 Slide Gate Operator
THIS UNIT WAS DISCONTINUED BUT IS STILL REPAIRABLE
The LiftMaster® SL595 is an extreme heavy-duty operator for industrial locations such as manufacturing plants and truck depots. The extremely powerful design supports gate lengths up to 90 feet and gate weights up to 2,500 pounds. Fully enclosed NEMA 3R oil-tight, weatherproof lockable cabinet and a high-starting continuous-duty torque motor with built-in overload protection ensure rugged and reliable performance. This model is ideal for the heaviest industrial installations and is UL325-compliant.
*Built-in 312HM radio receiver
*Larger control box
*Integrated 3-button control station
*External reset button
*Inherent obstruction sensing
*External obstruction sensing
*Advanced dual gate operation
*Sequenced access management
*Digital logic control
*LED indicators
*Warning device
*Loop detector inputs
*Timer to close
*Maximum run timer
*Emergency stop button
*Maglock control
*Control inputs
*Mechanical braking
*Limit settings
*Surge & spike protection
*Manual disconnect
*NEMA 3R enclosure
*Hinged access cover
To get on our schedule for your Liftmaster sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Viking Automatic Sliding Gate Openers:
**** The following is just a list of just some of the Viking automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Viking automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Viking H10 Slide Gate Operator (H10)
Viking H10 Slide Gate Operator
The H-10™ gate operator has the capacity to operate slide gates up to 2000 lbs. and 45 feet in length at 100% duty cycle under extreme conditions. It's efficient mechanism provides a solution for high traffic commercial slide gate applications. The Viking H-10™ gate operator offers efficiency and technology combined in a single package.
* built-in lightening protection
* 120 / 220 VAC power source
* back-driveable unit
* direct drive mechanism
* easy access to limit switch
* 2000 lbs. capacity
* 100 cycles during power failure
* soft-start, soft-stop
* adaptive learn algorithm
* easily accessed manual switch
* innovative fine tune adjustment
To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Viking K2 Slide Gate Operator (K2)
Viking K2 Slide Gate Operator
The K-2™ slide gate operator raises the bar in quality for the residential market. This machine operates a highly efficient direct motor drive which allows operation at 100% duty cycle. This assures efficiency and reliability. The fail-safe, fail-secure options of the K-2™ gate operator allows it to handle gates up to 650 lbs. in conformance with UL 325 and UL 991 Type I, III and IV.
* innovative fine tune adjustment
* switch to allow manual operation
* easy access to limit switch
* 100 cycles during power failure
* back-driveable
* 120 / 220 VAC power source
* on-board lightening protection
* soft-start, soft-stop algorithm
To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Viking K2S Solar Slide Gate Operator (K2S Solar)
Viking K2S Solar Slide Gate Operator
Max Gate Capacity
- 700 lbs/30'
Residential DC motor
- equivalent to 1/3 HP AC motor
V-Flex Control Board
- This control board is universal across the Viking DC & Solar Gate Operator line.
- Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
- Diagnostic, Voltages, Settings, and Status Display
- Conveniently labeled enclosure
- Ergonomically located
- LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.
Corrosion Protection
Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.
- G90 Galvanized
- Clear Zinc Plating
- UV Rated Powder Coating
- 1/4" Steel Chassis
- Large Space for Battery
The K-2™ Solar Slide Gate Operator can be used for gates up to 700 lbs and 30 ft long. The controller has its very own power management system to use its solar regulator to its fullest potential. The V-Flex Solar will allow for soft stop and soft start for smooth and accurate operation. Homeowners and installers alike have found great success with Viking's solar K-2 model.
Features:
MAX GATE CAPACITY
- 700 lbs/30' - This is the maximum amount of weight and length that the gate operator model can push/pull.
MAX OPERATING SPEED
- 12" Per Seconds - Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
SOLAR POWER SUPPLY
- 12 VDC - This is the power voltage needed for the gate operator to function
OPERATING TEMP
- 0°F up to 160°F - The Viking gate Operator will continue to function within this temperature range.
WARRANTY
- 5 Yr Residential - Please refer to manufactuerer's Warranty Policy for more information.
STRIKE PROTECTION
- 10,000 Amps / 20,000 Volts - Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Viking L3 Slide Gate Operator (L3)
Viking L3 Slide Gate Operator
The L-3™ gate operator has the capacity to operate slide gates up to 1200 lbs. and 40 feet in length at 100% duty cycle under extreme conditions. It's efficient mechanism provides a solution for high traffic commercial slide gate applications. The Viking L-3™ gate operator offers efficiency and technology combined in a single package.
* soft-start, soft-stop
* adaptive learn algorithm
* built-in lightening protection
* innovative fine tune adjustment
* back-driveable unit
* features direct drive mechanism
* easy access to limit switch
* larger chassis
* 120/220 VAC power source
* easily accessed manual switch
To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Viking Q4 Slide Gate Operator (Q4)
Viking Q4 Slide Gate Operator
The Q-4™ incorporates a powerful and efficient DC motor, a high amp power supply, an integrated battery back-up system and intelligent controller. The incorporation of these features results in outstanding performance on heavy duty slide gates. The advanced motor control circuit driving the motor guarantees long life. The Q-4™brings the advantages of DC gate operators into heavy duty applications.
* fail safe/fail-secure lock
* adaptive algorithm
* smooth acceleration / deceleration
* adjustable-height for main drive
* standard back-up battery
* more than 1/2 kilowatt of power
* innovative fine tune adjustment
* powerful gear head motor
* 100% duty cycles
* 100 cycles in case of power failure
To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Viking Q7 Slide Gate Operator (Q7)
Viking Q7 Slide Gate Operator
Max Gate Capacity
- 7000 lbs/120' - Commercial DC motor equivalent to 2 HP AC motor
V-Flex Control Board
This control board is universal across the Viking DC & Solar Gate Operator line. Providing additional protection against water and wildlife, the V-Flex Control Board is enclosed by a hard plastic cover.
- Diagnostic, Voltages, Settings, and Status Display
- Conveniently labeled enclosure
- Ergonomically located
- LCD Diagnostic Display - With our state of the art technology, Vikings LCD Diagnostic Display conveniently displays full error messages and reads real-time voltages in plain English. No need to decipher error codes in a lengthily manual, making troubleshooting quick and efficient.
Multi-layer Corrosion Protection
Each Viking Gate Operator is put to the test through extreme conditions, so you don't have to. Multiple layers of protection ensures that the chassis of the opener will endure through the harshest conditions. This coating thickness is designed uniquely for Viking Gate Operators to achieve the maximum durability.
- G90 Galvanized
- Clear Zinc Plating
- UV Rated Powder coating
- 1/4" Steel Chassi
2 HP 24V DC Motor
The Q-7 boasts a powerful and efficient 2 horse power DC voltage motor that can push/pull up to 7000 lbs. This motor is powered by its own individual power source directly from the power box. This ensures the proper amount of voltage and amperage is supplied the motor at all times.
The Q-7™ Slide Gate Operator is equipped with mechanical manual release freeing the gate completely from the gear drive. Some of the standard features include: 5 year commercial warranty, UL325 and UL991 compliance, innovative fine tune adjustment for the end of gate travel ( down to 1/8” ), adaptive algorithm with smooth acceleration and deceleration, and more than 1/2 kilowatt of power. This commercial rated operator comes with a built in battery backup system capable of 100 cycles in case of power failure, and a powerful and efficient gear-head motor.
Features:
MAX GATE CAPACITY
- 7000 lbs/120' - This is the maximum amount of weight and length that the gate operator model can push/pull.
MAX OPERATING SPEED
- 14" Per Seconds - Based on the speed selected when installing, this will be the speed your operator pushes/pulls your gate.
MAX DUTY CYCLE
- 100% Continuous Cycle - 100% duty cycle means that you can run your operator 24/7 with absolute confidence.
OPERATING TEMP
- -20°F up to 160°F The Viking gate Operator will continue to function within this temperature range.
WARRANTY
- 5 Yr Commercial - Please refer to manufactuer's Warranty Policy for more information.
STRIKE PROTECTION
- 10,000 Amps / 20,000 Volts - Leading the industry with the best in-unit lightning and surge protection.
To get on our schedule for your Viking sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Ram Automatic Sliding Gate Openers:
**** The following is just a list of just some of the Ram automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Ram automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
*************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
RAM 1000UL Slide Gate Operator (1000UL)
RAM 1000UL Slide Gate Operator
Perfect for heavier residential or commercial installations.
Max Gate Size: 35' @ 1000lbs
Gate Speed Opening: 1' / sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 Amp,50/60 Hz
Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:
Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock.
To get on our schedule for your Ram sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
RAM 100UL Slide Gate Operator (100UL)
RAM 100UL Slide Gate Operator
The Ram 100 is perfect for both residential and light duty commercial applications.
Max Gate Size: 20' @ 700lbs
Gate Speed Opening: 1' / sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 Amp, 50/60 Hz
Control Board:
A state-of-the-art, processor controlled, surface- mount pcb with features such as:
Electronic Reversing Device (ERD):
Automatically adjusts to the Size of the gate
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock.
To get on our schedule for your Ram sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
RAM 5000UL Slide Gate Operator (5000UL)
RAM 5000UL Slide Gate Operator
Max Gate Size: 40' @ 1000lbs
Gate Speed Opening: 1' / sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 Amp, 50/60 Hz
Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:
Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock.
To get on our schedule for your Ram sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
All-O-Matic Automatic Sliding Gate Openers:
**** The following is just a list of just some of the All-O-Matic automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your All-O-Matic automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
All-O-Matic SL-100 AC Slide Gate Operator (SL-100 AC)
All-O-Matic SL-100 AC Slide Gate Operator
Designed to be the strongest, most durable AC gate operator in its class, the SL-100AC is sure to fit the needs of most residential and commercial gate installation. Setting a new standard in slide gate operators, SL-100AC can move gates that are up to 1,000 lbs. and 37 feet wide. Â Just like our DC Slider 100 we now offer an optional emergency foot pedal release.
AC operators come with the simplest and most dependable control board in the industry thats backwards compatible. A powerful and durable motor that has been field tested for over 20 years.
Specs
- Warranty Full 7 Year Residential, 5 Year Commercial
- Motor ½ HP
- Duty Cycle Continous
- Power Options 120 V AC
- Gear Box Ratio 10:1
- Cover Rotationally Molded – Indestructible
- Dimensions W: 12" - L: 17.5" – H: 23.5"
- Maximum Gate Length 37 Feet
- Maximum Gate Weight 1,000 lbs
- Gate Travel Speed 12 inches per sec
- Operator Weight 100 lbs
- Emergency Release Options Can be pushed open in the event of a power failure
- Battery Backup N/A
To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
All-O-Matic SL-100 DC Slide Gate Operator (SL-100 DC)
All-O-Matic SL-100 DC Slide Gate Operator
Designed to be the strongest, most durable DC gate operator in its class, the SL-100DC is sure to fit the needs of most residential and commercial gate installation. Setting a new standard in slide gate operators, SL-100DC can move gates that are up to 2,000 lbs. and 45 feet wide. Just like our AC Slider 100 we now offer an optional emergency foot pedal release.
DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.
Specs
- Warranty 7 year Residential/ 5 Year Commercial
- Motor 24 VDC Brushless 1/2 HP Motor
- Maximum Gate Weight 2,000 lbs
- Maximum Gate Length 45 Feet
- Power Options 115/230 VAC Single Phase and 12/24 VDC Solar Panel
- Duty Cycle Continous Cycle
- Gear Box Ratio 10:1
- Width 12"
- Length 17.5"
- Height 23.5
- Gate Travel Speed 12 inches per second
- Operator Weight 130 lbs
- Cover Rotationally Molded – Indestructible
- Emergency Release Options Optional: Mechanical Foot pedal Release
- Battery Backup Integrated, with Two 7 Ah Batteries 12VDC
- Battery Backup Capacity Integrated with two 7AH batteries 12VDC
- Solar Capabilities 12VDC or 24VDC Solar Panel Input
- Belt Size 4L-300
- Main Sproket Size 41B22X7/8
- Limit Shaft Sprocket N/A
- Breaker Requirement 20 Amp Dedicated Breaker
- Temperature Range -40 to 160°
To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
All-O-Matic SL-100FP AC Slide Gate Operator (SL-100FP AC)
All-O-Matic SL-100FP AC Slide Gate Operator
The SL-100FP AC is our most popular automatic gate operator. Affordable, slim and rated for continuous duty on gates up to 1000lbs. This is a 110 Volt AC device capable of years and years of reliable service. The SL-100FP AC was originally intended for applications like public storage facilities in the US. You can imagine those gates have to work all the time.
AC operators come with the simplest and most dependable control board in the industry thats backwards compatible. A powerful and durable motor that has been field tested for over 20 years. A Majority of AC operators now include an emergency foot pedal release and a built-in loop rack.
Specs
- Warranty Full 7 Year Residential, 5 Year Commercial
- Motor ½ HP
- Duty Cycle Continous
- Power Options 120 V AC
- Gear Box Ratio 20:1
- Cover Rotationally Molded – Indestructible
- Dimensions W: 12" - L: 17.5" – H: 23.5"
- Maximum Gate Length 40 Feet
- Maximum Gate Weight 1,000 lbs
- Gate Travel Speed 12 inches per sec
- Operator Weight 100 lbs
- Emergency Release Options Can be pushed open in the event of a power failure
- Battery Backup N/A
To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
All-O-Matic SL-100FP DC Slide Gate Operator (SL-100FP DC)
All-O-Matic SL-100FP DC Slide Gate Operator
Designed to be the strongest, most durable DC gate Operator in its class. Allomatic’s long awaited SL-100FP DC has arrived. The SL-100FP DC gate operator utilizes an industry first brush less motor technology (no maintenance, high torque, and smooth quiet operation), total in house design, programming and construction. Equipped with a built in loop detector rack and enough power to operate all accessories on battery power. Manufactured with a heavy duty frame and parts that are made to last a life time, plus our industry leading warranty.
DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brush less DC motors are smooth and quiet but are powerful and durable and require zero maintenance. As with most of our AC operators, our DC operators now include an emergency foot pedal release and a built in loop rack.
Specs
- Warranty Full 7 Year Residential, 5 Year Commercial
- Motor 24 VDC Brushless 1/2 HP Motor
- Maximum Gate Weight 2,000 lbs.
- Maximum Gate Length 45 Feet
- Power Options 115/230 VAC Single Phase and 12/24 VDC Solar Panel
- Duty Cycle Continous Cycle
- Gear Box Ratio 30:1
- Length 12"
- Height 17.5"
- Gate Speed 12 inches per second
- Weight 130 lbs
- Emergency Release Options Optional: Mechanical Foot Pedal
- Battery Back Up Integrated, with Two 7 Ah Batteries 12VDC
- Battery Back Up Capacity Up to 80 Cycles on a 1,000 lbs Gate
- Solar Capabilities 12VDC or 24VDC Solar Panel Imput
- Belt Size Reg: 4L-300 Foot Pedal: 4L-260
- Main Sprocket Size 41B22X7/8
- Limit Shaft Sprocket 41B15X5/8
- Breaker Requirement 20 Amp Dedicated Breaker
- Temperature Range -40 to 160°
To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
All-O-Matic SL-45 DC Slide Gate Operator (SL-45 DC)
All-O-Matic SL-45 DC Slide Gate Operator
The SL-45 DC is the smallest most efficient and reliable residential DC gate operator in the industry. The SL-45 DC is small in size but enormous in performance. It's top of the line Planetary gearbox and Brushless DC Motor carries a tremendous advantage over the conventional gearboxes and brushed DC motor commonly used in the industry due to its compact size and its outstanding power transmission efficiency.
DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.
Specs
- Warranty 5 Year Residential
- Motor 24 VDC Brushless Motor - Continuous Duty Cycle
- Duty Cycle Continous
- Power Options 120/220 VAC Single Phase
- Gear Box Ratio 28.93:1 Planetary Gearbox High Efficiency
- Cover Rotationally Molded – Indestructible
- Dimensions W: 11" – L: 14.5" – H 15.5"
- Maximum Gate Length 30 Feet
- Maximum Gate Weight 800 Lbs
- Gate Travel Speed 12 inches per sec
- Operator Weight 50 lbs
- Emergency Release Options Can be pushed open in the event of a power failure
- Battery Backup Integrated, Capable of up to 250 cycles on a 600lbs Gate Battery: Two 8 Ah Batteries 12VDC
- Solar Capabilities 12VDC or 24VDC Solar Panel Input
To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
All-O-Matic SL-90 DC Slide Gate Operator (SL-90 DC)
All-O-Matic SL-90 DC Slide Gate Operator
The newly redesigned SL-90DC, Gate Operator, is equipped with a standard mechanical foot pedal release and larger gearbox with internal disconnect for higher gate capacity. Same compact size but it can now handle gates up to 1,600 lbs. and 50 feet long
DC operators are equipped with a control board that offers an array of features that include a programmable relay and leaf delay, slow start/stop algorithm, and solar power capability. The integrated battery backup offers up to two weeks of uninterrupted operation in the event of a power outage. Â The brushless DC motors are smooth and quiet but are powerful and durable and require zero maintenance.
Specs
- Warranty Full 7 Year Residential, 5 Year Commercial
- Motor 24 VDC Brushless Motor ½ HP - Continuous Duty Cycle
- Duty Cycle Continous
- Power Options 120/220 VAC Single Phase or 12/24V Solar panel
- Gear Box Ratio 20:1 with internal disconnect
- Cover Rotationally molded plastic (polyethylene)
- Dimensions W: 15.5" – L: 18.5" – H 16"
- Maximum Gate Length 50 Feet
- Maximum Gate Weight 1,600 lbs
- Gate Travel Speed 12 inches per sec
- Operator Weight 93 lbs
- Emergency Release Options Mechanical Foot Pedal Release
- Battery Backup Integrated, Capable of up to 150 cycles on a 1000lbs Gate Battery: Two 8 Ah Batteries 12VDC
- Solar Capabilities 12VDC or 24VDC Solar Panel Input
To get on our schedule for your All-O-Matic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Apollo Automatic Sliding Gate Openers:
**** The following is just a list of just some of the Nice (Apollo) automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Apollo automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 7251 Post Mount Slide Gate Operator (7251)
Nice (Apollo) 7251 Slide Gate Operator
Post mounted operator for sliding gates up to 800 lbs weight and 25 ft length each. 7251 single gate application. Supplied with 35 feet #40 roller chain.
Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power.
Easily installed on most existing or new slide gates. The operator has practical adjustment of the limit switches and internal quick release system for manual operation. Uses the single/dual advanced 1050 circuit board.
Featured
- LCD display for easy programming, diagnosting and troubleshooting
- Innovative obstacle detection system
- Plug-in receiver: up to 1,000 rolling-code transmitters
- Smart management of the battery charging
- Integrated 7 day timer
- Master/slave management for two motors working together
- Protection against electrical surges
- Programmable inputs for external accessories
- Corrosion Resistant
Specs
- Power Supply 12VDC
- Operating Voltage 12VDC
- Current Draw 10mA (standby)
- Speed 1' per seconds
- Duty Cycle Varies based on charging capacity
- Dimensions 21.5 x 21 x 11.5 in.
To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 7351 Pad Mounted Slide Gate Operator (7351)
Nice (Apollo) 7351 Pad Mounted Slide Gate Operator
Pad mounted operator for sliding gates up to 800 lbs weight and 25 ft length each. Recommended for high cycle residential an light commercial applications.
7351 single gate application. Supplied with 35 feet #40 roller chain. Solar compatible: optional 12 V battery (required) can be charged by either solar or AC power.
Easily installed on most existing or new slide gates. The operator has practical adjustment of the limit switches and internal quick release system for manual operation. Uses the advanced 1050 circuit board.
Features
- LCD display for easy programming, diagnosting and troubleshooting
- Innovative obstacle detection system
- Plug-in receiver: up to 1,000 rolling-code transmitters
- Smart management of the battery charging
- Integrated 7 day timer
- Master/slave management for two motors working together
- Protection against electrical surges
- Programmable inputs for external accessories
- Corrosion Resistant
Specs
- Power Supply 12-30VDC
- Operating Voltage 12VDC
- Current Draw 10mA
- Speed 1 ft per second
- Duty Cycle Varies based on charging capacity
- Dimensions 20 L x 15 W x 26H
To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 8300 Slide Gate Operator (8300)
Nice (Apollo) 8300 Slide Gate Operator
½ HP, 24 V motor, 120 Vac Slide Gate Operator. Operator for sliding gates up to 1000 lbs weight and 40 feet length.
Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.
Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.
Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.
Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard. Master/slave management: two units synchronized for dual application.
Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.
Features
- 24 V motors, 120 Vac main power.
- 1/2HP
- Easy to install
- LCD Display
- Plug-in receiver: up to 1,000 rolling-code transmitters
- 7 day programmable event timer
- Innovative Obstacle Detection System
- Surge Protection
- Programmable Inputs and Outputs
- Advanced Dual Gate Management
- Corrosion resistant
Specs
- Input Power: 120VAC
- Motor 24VDC 1/2 HP
- Maximum Speed 11 (in/s)
- Maximum Force 101 (lbf)
- Size 18.1 L x 18.5 W x 27.5 H
- Weight 110 lbs
To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Nice (Apollo) 8500 Slide Gate Operator (8500)
Nice (Apollo) 8500 Slide Gate Operator
1 HP, 24 V motor, 120 Vac Slide Gate Operator. Operator for sliding gates up to 1500 lbs weight and 40 feet length.
Easy to program: speed, force, sensitivity to obstacles and other parameters can be simply adjusted according to specific site and installation conditions and needs.
Easy to install: all parts requiring initial adjustment, such as the limit switches, are easily accessible. Thanks to the pivot support, the integrated control unit 1050 can be tilted to make programming more comfortable: its LCD large display shows the status of the operator and allows easy visual observation of the input leds.
Innovative: the integrated 1050 circuit board offers several features, such as 7 day programming, protection against electric shocks, programmable connections to external accessories such as lights, keypads, etc.
Plug-in receiver: up to 1,000 rolling-code transmitters, with more than 2X range than industry standard. Master/slave management: two units synchronized for dual application.
Reliable: the operator is safely protected from water and dust by the cover which can be easily removed to access the mechanical release in case of emergency. Corrosion resistant. The inside controls are separated from the external drive assembly to avoid water, dirty or small animals. Smart management of the battery charging.
Features
- 24 V motors, 120 Vac main power.
- 1HP Slide Gate Operator
- Easy to install
- LCD Display
- Plug-in receiver: up to 1,000 rolling-code transmitters
- 7 day programmable event timer
- Innovative Obstacle Detection System
- Surge Protection
- Programmable Inputs and Outputs
- Advanced Dual Gate Management
- Corrosion resistant
Specs
- Input Power: 120VAC
- Motor 24VDC 1 HP
- Maximum Speed 11 (in/s)
- Maximum Force 124 (lbf)
- Size 18.1 L x 18.5 W x 27.5 H
- Weight 115 lbs
To get on our schedule for your Nice (Apollo) sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 7000ETL Slide Gate Operator (7000ETL)
Apollo 7000ETL Slide Gate Operator
Meets UL325 standards
Operates slide gates up to 20', 600 lbs.
Pad mounted
Timer to close option
Adjustable limits
Available in dual gate model
Weather resistant
12V DC battery, solar or AC rechargeable
To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 7100ETL Slide Gate Operator (7100ETL)
Apollo 7100ETL Slide Gate Operator
Meets UL325 standards
Operates slide gates up to 20', 600 lbs.
Post mounted
Timer to close option
Adjustable limits
Available in dual gate model
Weather resistant
12V DC battery, solar or AC rechargeable
To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 7200ETL Slide Gate Operator (7200ETL)
Apollo 7200ETL Slide Gate Operator
Meets UL325 standards
Operates slide gates up to 30', 1000 lbs.
Post mounted
Available in dual gate model
Weather resistant
Timer to close option
Adjustable limits
12V DC battery, solar or AC rechargeable
To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*************
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 7300ETL Slide Gate Operator (7300ETL)
Apollo 7300ETL Slide Gate Operator
Meets UL325 standards
Operates slide gates up to 30', 1000 lbs.
Pad mounted
Available in dual gate model
Timer to close option
Adjustable limits
Weather resistant
12V DC battery, solar or AC rechargeable
To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
**********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Apollo 7500ETL Slide Gate Operator (7500ETL)
Apollo 7500ETL Slide Gate Operator
Meets UL325 standards
Heavy Duty/Continuous Duty slide gate operators
Operates slide gates 30f.t long and 1000lbs.
Single Box compact design
Fully adjustable internal limits
Lockable external quick release
Post-mounted or, with additional fabrication, pad-mounted
12V DC motor, case harden worm gear capable of generating more than 1/2 HP.
To get on our schedule for your Apollo sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
GTO Automatic Sliding Gate Openers:
**** The following is just a list of just some of the GTO automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your GTO automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
GTO GP-SL050 Slide Gate Operator GTO GP-SL050
GTO GP-SL050 Slide Gate Operator
CAPACITY:
- The GP-SL050 is designed for operation of slide gates.
- Max Gate; Weight 800 lbs. (362.9 kg), Length 32 ft. (9.8 m) with a 27 ft. (8.3 m) opening.
- (For bi-parting dual gates, a second operator is required).
- Assumes gate to be free sliding, in good working condition, and on a level plane.
MECHANICAL SPECIFICATIONS:
- AC Powered with inherent UPS (Uninterrupted Power System / Battery Backup) gate operation and all DC powered counters /safety devices.
- On board 12 V DC power delivers 300 Amp UPS
- 120 Vac 60 Hz built in power receptacles (1 amp rated)
- 25:1 direct drive worm gear with totally enclosed gear reduction
- 2500 RPM, 24V brushless DC motor - 1/2 HP. equivalent
- Operating temp 5 F (-28C) to +160 F (71 C)
- Non back-drive gearbox with ball bearing output shaft
- #41 Chain
- 12” per second maximum travel speed
- Weatherproof high density ABS, UV resistant cover
- Heavy Duty Steel Chassis
ELECTRICAL SPECIFICATIONS:
- GTO’s advanced technology commercial control board
- Digital / optical limits with fine adjustment JOG push buttons for easy and accurate setting of limits
- 100% solid-state motor controls circuitry
- APS (Absolute Position System) tracking system
- On board 3-Push button control station
- Operation, diagnostic and safety alarms, reverse sensor system
- Visual LED and audible diagnostic indicators
- Plug-in loop detector inputs for exit, shadow and safety loops
- Smooth start / smooth stop—for long mechanical life expectancy
- Built in power management system utilizing a high effiency switchmode power supply.
- (AC power supply, audible and visual low battery indicators, no loss of functionality in battery back up mode)
- Auto close adjustable 3-120 seconds delay
- Fail Safe or Fail Secure DIP switch selectable for low battery operation
- 12 Vdc, 300mA (.3 Amp), poly fuse protected auxiliary power output
DIMENSIONS:
- Height: 27”
- Depth: 18”
- Width: 15”
- SHIPPING WEIGHT: 74 lbs. (39 kg) Meets UPS shipping standards.
WARRANTY:
- 7 year residential application
CLASS OF OPERATION:
- Class I, II, III, IV
SAFETY LISTINGS:
- System Certified with UL325 5th Edition safety standards, ETL listed
DUAL GATE APPLICATIONS:
- The GP-SL050 is dual gate capable via communication link wires (14 – 20 gauge multi stranded 2-wire shielded
To get on our schedule for your GTO sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
GTO PRO-SL2000B Slide Gate Operator GTO PRO-SL2000B
GTO PRO-SL2000B Slide Gate Operator
The GTO/PRO PRO-SL2000B series will handle gates weighing up to 1000 lbs. (453.6 kg) and 30 ft. (9.1 m) in length with a 20 ft. (6.1 m) opening, if all proper installation procedures have been followed. Note: ball bearing rollers should be used on all gates.
FEATURES:
- Full systems capable “add on ready” heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0–120 seconds).
- Includes a built-in internal friction disc brake/lock.
- Easy to install 4 ft. (1.2 m) post mounts (2) provided.
- Chain disconnect for manual operation.
- Light professional and residential cycle rated to 100 cycles daily.
MECHANICAL:
- Operating temp -5 F (-21C) to +160 F (71 C).
- Opening time: 1 ft. (.31 m) per second.
- #41 Chain 32 ft. with master link.
- Fully compatible accessory terminal block provides connectionsfor safety loops, wands, intercoms, card readers, phone systems.
- Operation, diagnostic and safety alarms
- Inherent obstruction sensing.
- Soft start/soft stop—for long mechanical life expectancy.
- Auto close adjustable 3–120 seconds delay.
ELECTRICAL/POWER:
- 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
- Battery charge is maintained by a 120V AC/60 Hz input and 18VAC at 40 VA. output, transformer rectified to 14V DC through control board
- Powered by a reliable 12 Volt (1/4 HP equivalent) DC motor, casehardened steel gear reducer.
- Charging regulated circuit on control board. “Sleep draw” is 40mA; “active draw” is 2 to 9 amps.
DIMENSIONS:
- Height: 18 ̋
- Depth: 11 ̋
- Width: 21.5
SHIPPING WEIGHT:
- 70 lbs. (32 kg) Meets UPS shipping standards
WARRANTY:
- 2 Year (RESIDENTIAL application)
CLASS OF OPERATION:
- Class I, II, III, IV
SAFETY LISTINGS:
- System Certified with UL325 5th Edition safety standards, ETL listed.
OPTIONS:
- Solar Power: Requires a 24 Amp hour battery (not included).10-watt Solar Panel
- Charger:float voltage 14.5 V DC output from 14 ̋ (36 cm) x 12 ̋ (31 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
- Pad Mount: requires the Pad Mounting Plate (SGMP).Dual Gates: For dual gate applications, add model PRO-SL2200B
To get on our schedule for your GTO sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Linear Automatic Sliding Gate Openers:
**** The following is just a list of just some of the Linear automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your Linear automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Linear GSLG-A Series Slide Gate Operator (GSLG-A)
Linear GSLG-A Series Slide Ga
te Operator
The GLSG-A is a heavy duty slide gate operator for commercial and industrial applications.
Cabinet
- Weather-resistant galvannealed steel cabinet with powder coat finish
- Lockable, gasketed, hinged and removable front cover for easy access
Mechanical
- Heavy-duty 15:1 right angle C-face gear reducer
- #50 roller chain and sprocket
- Adjustable torque limiter
- Heavy-duty pillow-block bearings
Mounting
- 3 - 3 1/2" OD post mounting
- Optional pad mounting pedastal availiable
Control Circuit
- Solid state circuit board, 24 VDC
- Inherent current sensing system
- 15 LEDs for easy setup and troubleshooting
- Built in maximum run timer and auto close timer
- Right-hand/left-hand easy conversion
- Entrapment alarm
ELECTRICAL
- 1/2, 3/4 or 1 hp, 115 or 230 VAC, single phase, thermally protected, heavy- duty C-face PSC motor
- 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy duty motor
- Double C-face brake
- Power on/off switch
- Emergency stop/reset button on front coverlinear gslg
- Duplex receptacle on 115 VAC units
- Three-button control station included
- Accessory connections are 24-volt AC or DC
- Easily adjustable rotary limit switches
- Full system capable for access controls and reversing devices
Capacities:
- 1/2 HP - MAXIMUM GATE WEIGHT 1100 LBS. or MAXIMUM GATE LENGTH 45 FT.
- 3/4 HP - MAXIMUM GATE WEIGHT 1400 LBS. or MAXIMUM GATE LENGTH 60 FT.
- 1 HP - MAXIMUM GATE WEIGHT 2200 LBS. or MAXIMUM GATE LENGTH 78 FT.
To get on our schedule for your Linear sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Linear HSLG Series Slide Gate Operator (HSLG)
Linear HSLG Series Slide Gate Operator
The HSLG is a continuous-duty slide gate operator for commercial and industrial applications.
Cabinet
- Weather-resistant galvannealed steel cabinet with powder coat finish
- Lockable, gasketed, hinged and removable front cover for easy access
Mechanical
- #40 roller chain and sprockets
- Adjustable torque limiter
- Heavy-duty pillow-block bearings
- Efficient double V-belt drive
Mounting
- 3 - 3 1/2" OD post mounting
- Optional pad mounting pedestal available
Control Circuit
- Solid state circuit board, 24 VDC
- Inherent current sensing system
- 15 LEDs for easy setup and troubleshooting
- Built in maximum run timer and auto close timer
- Right-hand/left-hand easy conversion
- Entrapment alarm
Warning Signals
- Continuous tone entrapment alarm
- Warning beeper to sound when gate is moving
- Pre-start audio/visual outputs included
ELECTRICAL
- 1/2, 3/4 or 1 hp, 115 or 230 VAC, single phase, thermally protected, heavy-duty PSC motor
- 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy-duty motor
- Magnetic solenoid disc brake
- Power on/off switch
- Emergency stop/reset button on front coverlinear hs
- Duplex receptacle on 115 VAC units
- Three-button control station included
- Accessory connections are 24-volt AC or DC
- Easily adjustable rotary limit switches
- Full system capable for access controls and reversing devices
MECHANICAL FEATURES:
- Heavy duty zinc plated steel chassis
- Easily operated emergency manual disconnect handle
- Sleek and sturdy UV-stabilized polyethylene cover
- #41 drive chain - 31' included with the operator
- Universal pad mount standard - optional post mount kit available
MODEL SLD EXCLUSIVE FEATURES:
- Full DC powered operator with built in battery backup
- Continuous duty 1/2 HP DC permanent magnet motor
- Powered by 115V or 24VDC supply
- Seamless transition to battery backup mode when AC power fails
- Selectable fail-safe or fail-secure modes of operation
- Solar power capable
Capacities:
- 1/2 HP - MAXIMUM GATE WEIGHT 1100 LBS. or MAXIMUM GATE LENGTH 35 FT.
- 3/4 HP - MAXIMUM GATE WEIGHT 1200 LBS. or MAXIMUM GATE LENGTH 45 FT.
- 1 HP - MAXIMUM GATE WEIGHT 1700 LBS. or MAXIMUM GATE LENGTH 55 FT.
To get on our schedule for your Linear sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
Linear VS-GSLG Series Slide Gate Operator (VS-GSLG)
Linear VS-GSLG Series Slide Gate Operator
The VS-GSLG is a variable speed slide gate operator for heavy-duty commercial and industrial applications for 45 ft to 100 ft gates weighing 1100 lbs to 4000 lbs.. There are many different models to specifically fit your specific gate.
Cabinet
* Weather-resistant galvannealed steel cabinet with powder coat finish
* Lockable, gasketed, hinged and removable front cover for easy access
Mechanical
* Heavy-duty 10:1 right angle C-face gear reducer
* #50 roller chain and sprocket
* Adjustable torque limiter
* Heavy-duty pillow-block bearings
Mounting
* 3 - 3 1/2" OD post mounting
* Optional pad mounting pedestal available
Control Circuit
* Solid State circuit board, 24VDC
* Multiple LEDs for easy setup and troubleshooting
* Built in maximum run timer and auto close timer
* Right hand/left hand easy conversion
* Master/Slave - simple three-wire connection
Electrical
* Variable speed - soft start/soft stop programmable through an inverter motor control (Voltage and phase of input required at time of order)
* Availiable from 1/2 HP to 2 HP industrial continuous duty, three-phase, 56 frame motors
* Availiable in all standard voltages and phases
* Maximum run timer for clutch and motor protection
* Double C-face brake
* Power on/off switch
* Duplex receptacle on 115VAC units
* Three-button control station included
* Accessory connections are 24-volt AC and DC
* Easily adjustable rotary limit switches
* Full system capable for access controls and reversing device
To get on our schedule for your Linear sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing Automatic Sliding Gate Openers:
**** The following is just a list of just some of the DoorKing automatic sliding gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. To get on our schedule for your DoorKing automatic sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS9050 Slide Gate Operator (DKS9050)
DoorKing DKS9050 Slide Gate Operator
The Model 9050 operators are designed to operate vehicular slide gates in residential and light-duty commercial applications only. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements.
*Self-adjusting, no maintenance magnetic limits.*Ports for plug-in loop detectors.
*Two convenience outlets.
*Fail-safe release (fail-secure optional).
*Programming switches.
*Built-in reset switch.
*Built-in power On/Off switch.
Model 9050-080
- Maximum gate length 16-feet.
- Maximum gate weight 300 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- 1/2 HP limited-duty motor.
- 115 VAC, 4.3 Amps.
- Class I applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
- 12"W x 24"H x 11.5"D
Options Availiable
- #40 chain.
- Nickel plated chain.
- Stainless steel chain.
- Plug-in loop detectors.
- Heater kit for cold environments.
- Base plate to post mount this operator (does not include posts).
- Surge suppressors.
To get on our schedule for your DoorKing sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS9100 Slide Gate Operator (DKS9100)
DoorKing DKS9100 Slide Gate Operator
The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.
- Self-adjusting, no maintenance magnetic limits.
- Partial-open feature.
- Anti-tailgating feature.
- Gate tracker reporting output.
- Ports for plug-in loop detectors.
- Two convenience outlets.
- Fail-safe release (fail-secure optional).
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.
Model 9100-080
- Maximum gate length 30-feet.
- Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- 1/2 HP continuous-duty motor.
- 115 VAC, 5.4 Amps.
- Operator is shipped with chain brackets and 20-feet of #41 chain.
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
- Dimensions: 12"W x 24"H x 11.5"D
Options Availiable
- #40 chain.
- Nickel plated chain.
- Stainless steel chain.
- Plug-in loop detectors.
- Heater kit for cold environments.
- Base plate to post mount this operator (does not include posts).
- Surge suppressors.
To get on our schedule for your DoorKing sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Sliding Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS9150 Slide Gate Operator (DKS9150)
DoorKing DKS9150 Slide Gate Operator
Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
- Self-adjusting, no maintenance magnetic limits.
- Partial-open feature.
- Anti-tailgating feature.
- Gate tracker reporting output.
- Ports for plug-in loop detectors.
- DC Powered Convenience Open (Optional).
- Two convenience outlets.
- Fail-safe release (fail-secure optional).
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.
Model 9150-084 with 1/2 HP Motor
- Maximum gate length 30-feet.
- Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
- 1/2 HP continuous-duty motor.
- 115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Operator is shipped with chain brackets and 20-feet of #40 chain.
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
- Dimensions: 15"W x 24"H x 16.5"D
Model 9150-080 with 1 HP Motor
- Maximum gate length 45-feet.
- Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
- 1 HP continuous-duty motor.
- 115, 230*, 460* VAC (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Operator is shipped with chain brackets and 20-feet of #40 chain.
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.)
- Dimensions: 15"W x 24"H x 16.5"D
Options Availiable
- DC powered convenience open.
- Nickel plated chain.
- Stainless steel chain.
- Plug-in loop detectors.
- Heater kit for cold environments.
- Base plate to post mount this operator (does not include posts).
- Surge suppressors.
To get on our schedule for your DoorKing sliding gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Automatic Barrier Arm Gate Openers:
********** The following is just a small list of some automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your automatic barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster Automatic Barrier Arm Gate Openers:
********** The following is just a small list of some Liftmaster automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Liftmaster automatic barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********
Liftmaster MEGA ARM SPRINT TOWER
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster MEGA ARM DC Barrier Arm Gate Operator MA
Liftmaster MEGA ARM DC Barrier Arm Gate Operator
Liftmaster® high-traffic DC powered barrier gate operators with Battery Backup keep traffic flowing and provide easy in and out access 24 hours a day. Rated for 6,000 cycles per day with an opening time of 2.5 seconds and constructed of corrosion resistant aluminum alloy, the Mega Arm/Mega Arm Tower are the ideal choice for high-traffic applications. The product’s Security+ 2.0® radio technology provides unparalleled reliability and quick, secure access. Optional LED Barrier Arm provides exceptional visibility 24 hours a day.
Performance
- Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
- Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
- Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
- Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
- Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
- Sequenced Access Management provides control between barrier and slide/swing gate operators to maximize traffic flow.
- K1 Relay provides output signals to activate other accessories or operators during open/close cycles.
Safety and Security
- Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
- Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
- Anti-Tailgate Feature prevents unauthorized access to your property.
- Built-in Surge Suppression protects against high-voltage spikes and surges.
Features
- Dual-Gate Operation Works in conjunction with another barrier gate operator.
- Built-In 110V Convenience Outlet Simplifies adding/powering up accessory devices. Save the expense of having to add an extra outlet.
- Universal Controller With 8 Inputs Allows for the connection of a full range of optional external devices.
- Right or Left Handed Operation Provides flexibility to fit your application and ease of installation.
- Slip Clutch Option Allows arm to be manually pushed open without damaging the shear pin. Arm automatically resets to normal closed position upon receiving activation.
- 850LM Radio Receiver Included Stores up to 90 remote controls.
- Warranty Two years parts. Ten years frame.
Specifications
- Operator Speed 2.5 seconds to open or close
- Power 120V / 220V applications
- Accessory Power 24VDC 500 mA
- Operator Weight (without arm) MADCBB3 – 89 lbs. MATDCBB3 – 113 lbs.
- UL Listed UL 325 & UL 991 – Class I, II, III, IV
Construction
- Gear Reduction 60:1 reducer in synthetic oil bath
- Motor 1/2 HP equivalent Continuous-duty 24VDC / 800 RPM
- Chassis Powder coated 1/4 in. aluminum alloy
- Cover MA – UV-resistant polyethylene MAT – Full aluminum cabinet
Recommended Capacities
- HP 1/2
- MAX ARM LENGTH 12ft. & 17ft. Aluminum Arm and 14ft. Soft-Padded arm
- MAX CYCLES/DAY 6,000
LiftMaster® gate operators comply with UL 325 standards. External entrapment devices must be added to meet UL 325 standards. Your installer will recommend suitable entrapment devices such as photoelectric sensors or edge sensors.
LED Barrier Arm Specifications
- Arm Material Aluminum
- Operating Voltage 12VDC
- Lamp Type LED 3528 IP68 Silica gel filled
- Color Red/White
- Power 14.4 W/m
- Operating Temperature -13°F (-25°C) to 140°F (60°C)
- UL Listed UL 325 & UL 991 – Class I, II, III, IV
- Warranty Six month limited.
MALED12
- Arm - 12 ft. x 3 in. x 2 1/4 in., 17 lbs. (10 ft. 9-3/4 in. installed)
- Contents (1) 12 ft. Arm with LED (1) Installation Kit
MALED17
- Arm 17 ft. x 3 in. x 2 1/4 in., 25 lbs. (14 ft. installed)
- Requires Counterweight (MALEDCW)
- Contents (1) 17 ft. Arm with LED (1) Installation Kit
MALEDCW
- Counterweight 14 in. x 2 3/4 in. x 2 1/8 in., 11 lbs.
To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster MEGA ARM TOWER DC Barrier Arm Gate Operator MAT
Liftmaster MEGA ARM TOWER DC Barrier Arm Gate Operator
LiftMaster® high-traffic DC powered barrier gate operators with Battery Backup keep traffic flowing and provide easy in and out access 24 hours a day. Rated for 6,000 cycles per day with an opening time of 2.5 seconds and constructed of corrosion resistant aluminum alloy, the Mega Arm/Mega Arm Tower are the ideal choice for high-traffic applications. The product’s Security+ 2.0® radio technology provides unparalleled reliability and quick, secure access. Optional LED Barrier Arm provides exceptional visibility 24 hours a day.
Performance
- Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
- Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
- Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
- Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
- Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
- Sequenced Access Management provides control between barrier and slide/swing gate operators to maximize traffic flow.
- K1 Relay provides output signals to activate other accessories or operators during open/close cycles.
Safety and Security
- Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
- Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
- Anti-Tailgate Feature prevents unauthorized access to your property.
- Built-in Surge Suppression protects against high-voltage spikes and surges.
Features
- Dual-Gate Operation Works in conjunction with another barrier gate operator.
- Built-In 110V Convenience Outlet Simplifies adding/powering up accessory devices. Save the expense of having to add an extra outlet.
- Universal Controller With 8 Inputs Allows for the connection of a full range of optional external devices.
- Right or Left Handed Operation Provides flexibility to fit your application and ease of installation.
- Slip Clutch Option Allows arm to be manually pushed open without damaging the shear pin. Arm automatically resets to normal closed position upon receiving activation.
- 850LM Radio Receiver Included Stores up to 90 remote controls.
- Warranty Two years parts. Ten years frame.
Specifications
- Operator Speed 2.5 seconds to open or close
- Power 120V / 220V applications
- Accessory Power 24VDC 500 mA
- Operator Weight (without arm) MADCBB3 – 89 lbs. MATDCBB3 – 113 lbs.
- UL Listed UL 325 & UL 991 – Class I, II, III, IV
Construction
- Gear Reduction 60:1 reducer in synthetic oil bath
- Motor 1/2 HP equivalent Continuous-duty 24VDC / 800 RPM
- Chassis Powder coated 1/4 in. aluminum alloy
- Cover MA – UV-resistant polyethylene MAT – Full aluminum cabinet
Recommended Capacities for 1/2 HP
- MAX ARM LENGTH (ft.) 12ft. & 17ft. Aluminum Arm 14ft.
- CYCLES/DAY Soft-Padded arm. 6,000
LiftMaster® gate operators comply with UL 325 standards. External entrapment devices must be added to meet UL 325 standards. Your installer will recommend suitable entrapment devices such as photoelectric sensors or edge sensors.
LED Barrier Arm Specifications
- Arm Material Aluminum
- Operating Voltage 12VDC
- Lamp Type LED 3528 IP68 Silica gel filled
- Color Red/White
- Power 14.4 W/m
- Operating Temperature -13°F (-25°C) to 140°F (60°C)
- UL Listed UL 325 & UL 991 – Class I, II, III, IV
- Warranty Six month limited.
MALED12
- Arm 12 ft. x 3 in. x 2 1/4 in., 17 lbs. (10 ft. 9-3/4 in. installed)
- Contents (1) 12 ft. Arm with LED (1) Installation Kit
MALED17
- Arm 17 ft. x 3 in. x 2 1/4 in., 25 lbs. (14 ft. installed)
- Requires Counterweight (MALEDCW)
- Contents (1) 17 ft. Arm with LED (1) Installation Kit
MALEDCW
- Counterweight 14 in. x 2 3/4 in. x 2 1/8 in., 11 lbs.
To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster MEGA SPRINT DC Barrier Arm Gate Operator MAS
Liftmaster MEGA SPRINT DC Barrier Arm Gate Operator
The Mega Arm Sprint is a DC-powered, high-speed addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional speed, making it ideal for parking applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.
No power? No problem! Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
Standard Features:
- Radio receiver built-in
- Aluminum alloy chassis
- Built-in battery backup
- Soft start/stop
- DC operator system
- Right or left-handed operation
- Breakaway arm
- Control inputs
- Inherent obstruction sensing
- LED indicators
- Dual gate operation
- Dynamic braking
- Magnetic sensors
- Timer to close
- 2-year warranty for electronics and mechanism;
- 10-year warranty for chassis and cover
Performance
- Battery Backup safeguards your property by providing up to up to 900 cycles* when the power is down.
- Breakaway Arm can be easily reinstalled if arm is hit, quickly restoring traffic control.
- Continuous Duty DC Motor is powerful and features soft starting and stopping for quiet, efficient operation.
- Heavy-Duty Drive System with Commercial Gearbox provides reliable, continuous operation.
- Magnetic Limit Sensors have no moving parts and are designed for high-cycle applications, so there’s less wear and tear and you’re assured dependable operation day-in and day-out.
- Sequenced Access Management provides control between barrier and slide/ swing gate operators to maximize traffic flow
- K1 Relay provides output signals to activate other accessories or operators during open/close cycles
Safety and Security
- Security+ 2.0 Patented Multi-Frequency Secure Radio Technology virtually eliminates interference and gives you quick and secure access with enhanced range and performance.
- Fire Department Compliant selectable settings allow gate to auto open upon loss of AC power or battery depletion.
- Anti-Tailgate Feature prevents unauthorized access to your property.
- Built-in Surge Suppression protects against high-voltage spikes and surges.
*Basic set up with remote controls programmed with a 12 ft. Barrier Arm. Does not include power draw from added accessories. Liftmaster low power draw accessories recommended to extend cycles on Battery Backup.
To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster MEGA SPRINT TOWER DC Barrier Arm Gate Operator MAST
Liftmaster MEGA SPRINT TOWER DC Barrier Arm Gate Operator
The Mega Arm Sprint Tower is a DC-powered, high-speed addition to the LiftMaster® family of gate operators. Designed with a 24VDC (1/2 HP equivalent) motor, this model provides exceptional speed, making it ideal for parking applications. Constructed with an aluminum alloy chassis, it is corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.
No power? No problem! Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
Barrier arms sold separately
Standard Features:
- Radio receiver built-in
- Aluminum alloy chassis
- Built-in battery backup
- Soft start/stop
- DC operator system
- Right or left-handed operation
- Breakaway arm
- Control inputs
- Inherent obstruction sensing
- LED indicators
- Dual gate operation
- Dynamic braking
- Magnetic sensors
- Timer to close
- 2-year warranty for electronics and mechanism;
- 10-year warranty for chassis and cover
Performance
- Get on and off your property even when the power’s out with our Battery Backup feature and ultra-efficient power management system.
- Get durable protection and easy service access with the Aluminum Alloy Cover.
- Extend the life of the Operator with soft start/stop and a powerful 24V DC Motor.
- Rated for gates up to 10,000 cycles per day.
Safety and Security
- With our built-in Security+ 2.0® interference-eliminating technology, you can be confident that your property is secure and only your remote will open and close your gate.
- Emergency access compliant so first responders can have access if they need it.
- Know when your gate is about to open or close with a pre-motion warning.
- UL/cUL Listed tested to the most stringent industry guidelines.
- LiftMaster Gate Operator complies with UL325 standards. Secondary entrapment devices must be added to meet UL325 standards. Your Installer will recommend suitable secondary entrapment devices such as photo eyes or edge sensors.
To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster BG770 Barrier Arm Gate Operator BG770
Liftmaster BG770 Barrier Arm Gate Operator
The LiftMaster® BG770 offers reliable performance barrier gate operator for industrial applications such as airports, parking garages, and manufacturing plants.
All LiftMaster Openers, Operators, and Systems should be professionally installed.
Performance
- Get durable protection and easy service access with the lockable Weather-Resistant Steel Cover.
- Extend the life of the Operator with powerful AC Motor.
- Rated for gates up to 25 cycles per hour.
Safety and Security
- With our built-in Security+ 2.0® interference-eliminating technology, you can be confident that your property is secure and only your remote will open and close your gate.
- UL/cUL Listed tested to the most stringent industry guidelines.
- LiftMaster Gate Operator complies with UL325 standards. Secondary entrapment devices must be added to meet UL325 standards. Your Installer will recommend suitable secondary entrapment devices such as photo eyes or edge sensors.
To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster BG790 Wishbone Barrier Arm Gate Operator BG790
Liftmaster BG790 Wishbone Barrier Arm Gate Operator
When an application calls for a barrier gate, LiftMaster's BG790 has the reliability and features you require for a commercial installation. The BG790 can be utilized in a high traffic area or integrated with another style gate to create a trap.
All Liftmaster Openers, Operators, and Systems should be professionally installed.
Performance
- Supports up to 25 cycles per hour.
- Controls the speed of your door with a Heavy-Duty Gear Reducer.
- Resists the elements with an 11-Gauge Steel-Cabinet with Weather Resistant Baked-on Powder Coat Finish.
- Easily access the interior of the Operator with removable top and side panels.
- Provides simple access to electrical controls in a separate removable enclosure.
- Offers ample power with a 24VAC Control Circuit.
- Applies Open/Close functions with the standard two-push-button control station.
- Controls the power to the board with a Power Input On/Off Switch.
- Supports an additional accessory with one 115VAC Accessory outlet (on 115VAC models only).
- Features an Industrial-Size 0 Across-the-line Reversing Starter.
- Easily install and maintain the Operator with a fully adjustable limit system.
- Allows for Pad Mount installation.
- Includes Wishbone Arm (24 feet) and Counterweight are provided (max. length).
Safety and Security
- Access your facility quickly and safely with Security+ 2.0™ Technology, which virtually eliminates interference and offers up to 2X the range of standard remotes.
- Stores up to 90 remotes with the built-In 850LM Security+ 2.0™ receiver. o Receiver stores up to 90 remotes
- Compatible with most access control devices and safety accessories.
- Supports Optional LiftMaster® Plug-in Style Loop Detectors for Exit and Hold Open Loops.
- Compliant to all UL 325 standards for Class I, II, III and IV.
To get on our schedule for your Liftmaster barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Apollo Automatic Barrier Arm Gate Openers:
********** The following is just a small list of some Apollo automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Apollo automatic barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Nice(Apollo) LBAR Barrier Arm Gate Operator LBAR
Operator 24 Vdc for bars up to 29.5 ft. Steel case with protective cataphoresis treatment and paint finish.
Operator 24 Vdc for bars up to 29.5 ft. Steel case with protective cataphoresis treatment and paint finish.
Modular: bars are easily assembled using the aluminum expansion joint. Possibility for intelligent control of two opposing operators thanks to "master/slave” function.
Strength and reliability:
- robust structure in steel
- new high strength balancing springs
- elliptical section bar with high wind-gust resistance
- Optional flashing or traffic light can be integrated in cover.
- Encoder movement control and electromechanical limit switches.
More comfort and safety in programming and maintenance:
- the separate enclosures for electronics and mechanics protect internal parts from potential risks.
- Rapid and easy access to the control unit located in the upper section of the barrier body.
- Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.
More safety and reliability:
- obstacle detection and monitoring of motor current during automation movement
- Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
- Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).
Energy saving:
- the system sets to standby when not in use to lower power consumption.
No blackouts:
- emergency backup power with the optional batteries housed inside the case.
- Release from side with metal key, can be installed on either side.
Features
- Adjustable Force
- Adjustable Speed
- Auto Close Delay
- Precision Encoder
Specs
- Power Supply 120VAC
- Absorption 1.3A
- Power 24VDC
- Torque 400
- Cycles/Hour 150
- Protection IP Rating 44
Technology
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Nice(Apollo) M3BAR Barrier Arm Gate Operator M3BAR
Operator 24 Vdc for bars up to 13.1 ft. or 16.5 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.
Modular:
- bars are easily assembled using the aluminum expansion joint.
- Possibility for intelligent control of two opposing operators thanks to "master/slave” function.
Strength and reliability:
- robust structure in steel
- new high strength balancing springs
- elliptical section bar with high wind-gust resistance
- Optional flashing or traffic light can be integrated in cover
- Encoder movement control and electromechanical limit switches
More comfort and safety in programming and maintenance:
- the separate enclosures for electronics and mechanics protect internal parts from potential risks
- Rapid and easy access to the control unit located in the upper section of the barrier body
- Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.
More safety and reliability:
- obstacle detection and monitoring of motor current during automation movement
- Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
- Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).
Energy saving:
- the system sets to standby when not in use to lower power consumption.
No blackouts:
- emergency backup power with the optional batteries housed inside the case.
- Release from side with metal key, can be installed on either side.
Features
- Adjustable Force
- Adjustable Speed
- Auto Close Delay
- Precision Encoder
Specs
- Power Supply 120VAC
- Absorption 1.1A
- Power 24VDC
- Torque 200
- Cycles/Hour 350
- Protection IP Rating 44
Technology
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Nice(Apollo) M5BAR Barrier Arm Gate Operator M5BAR
Operator 24 Vdc for bars up to 13.1 ft. or 16.5 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.
Modular: bars are easily assembled using the aluminum expansion joint. Possibility for intelligent control of two opposing operators thanks to "master/slave” function.
Strength and reliability:
- robust structure in steel
- new high strength balancing springs
- elliptical section bar with high wind-gust resistance
- Optional flashing or traffic light can be integrated in cover
- Encoder movement control and electromechanical limit switches
More comfort and safety in programming and maintenance:
- the separate enclosures for electronics and mechanics protect internal parts from potential risks
- Rapid and easy access to the control unit located in the upper section of the barrier body
- Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.
More safety and reliability:
- obstacle detection and monitoring of motor current during automation movement
- Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
- Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).
Energy saving:
- the system sets to standby when not in use to lower power consumption.
No blackouts:
- emergency backup power with the optional batteries housed inside the case.
- Release from side with metal key, can be installed on either side.
Features
- Adjustable Force
- Adjustable Speed
- Auto Close Delay
- Precision Encoder
Specs
- Power Supply 120VAC
- Absorption 1.1A
- Power 24VDC
- Torque 200
- Cycles/Hour 350
- Protection IP Rating 44
Technology
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Nice(Apollo) M7BAR Barrier Arm Gate Operator M7BAR
Operator 24 Vdc for bars up to 16.5, 19.7 or 23 ft. with foundation plate. Steel case with protective cataphoresis treatment and paint finish.
Modular:
- bars are easily assembled using the aluminum expansion joint
- Possibility for intelligent control of two opposing operators thanks to "master/slave” function.
Strength and reliability:
- robust structure in steel
- new high strength balancing springs
- elliptical section bar with high wind-gust resistance
- Optional flashing or traffic light can be integrated in cover
- Encoder movement control and electromechanical limit switches
More comfort and safety in programming and maintenance:
- the separate enclosures for electronics and mechanics protect internal parts from potential risks
- Rapid and easy access to the control unit located in the upper section of the barrier body
- Specially designed enclosures allow simple attachment of photocells to the barrier operator cabinet.
More safety and reliability:
- obstacle detection and monitoring of motor current during automation movement
- Automatic fault diagnostics during operation with consequent signaling of fault type through specific flash sequences.
- Provision for connection of latest generation optical and resistive sensitive edges (with 8.2 KOhm resistance).
Energy saving:
- the system sets to standby when not in use to lower power consumption.
No blackouts:
- emergency backup power with the optional batteries housed inside the case.
- Release from side with metal key, can be installed on either side.
Features
- Adjustable Force
- Adjustable Speed
- Auto Close Delay
- Precision Encoder
Specs
- Power Supply 120VAC
- Absorption 1.1A
- Power 24VDC
- Torque 300
- Cycles/Hour 200
- Protection IP Rating 44
Technology
- O-View - Unit for control, programming and diagnostics. On site or remotely.
- BlueBus - Easy and quick installations, just two wires without polarity!
To get on our schedule for your Apollo barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Linear Automatic Barrier Arm Gate Openers:
********** The following is just a small list of some Linear automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your Linear automatic barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Linear BGU Barrier Arm Gate Operator BGU
Linear BGU Series Barrier Gate Operators
Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.
Ratings
- Maximum duty cycle: Continuous
Features
- Integral APeX Controller
- Power on/off switch
- Duplex receptacle (115 VAC units only)
- On-board APeX Controller three-button control station
- All accessory connections 24 VDC
- Easily adjustable cam-operated limit switches
- Lockable and removable front cover for easy access
- Built-in maximum run timer and auto close timer
- Master/second with simple 3-wire connection
- Dual V-belt
- Heavy-duty right angle gear reducer
- Heavy-duty harmonic link with oil impregnated bronze bushings
- Gate arm clamp with breaker bar
- Motor has manually-resettable overload
- Full system capable for access control and reversing devices
- Weather resistant galvanized steel cabinet with powder coat finish
Arm Options
- 10 foot wood arm
- 12 foot wood arm
- 14 foot wood arm
Factory Options
- White or yellow powder coat finish
- Optional thermostatically-controlled strip heater
- Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present
Warranty
- 5 years
To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Linear BGU-D Barrier Arm Gate Operator BGU-D
Linear BGU-D Series Barrier Gate Operators
For traffic control and parking applications, available in 1/2 horsepower, 115V supply voltage, various arm lengths.
Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.
The BGU-D has programmable fail safe or fail secure operation. With fail safe selected, when the gate operator senses AC power is no longer present, the arm will cycle open, remaining open until AC power is restored. With fail secure selected, during a power failure the BGU-D continues normal operation while monitoring the battery level. Once the batteries are low, the unit will cycle open until AC power is restored or the batteries receive a full charge via optional solar panels.
Ratings
- Maximum duty cycle: Continuous
Features
- Integral APeX Controller
- 24 VDC permanent magnet motor
- 115 VAC supply converted to 24 VDC for motor and controls
- Dual batteries charged by 115 VAC or optional solar panels
- On-board APeX Controller three-button control station
- Power on/off switch
- All accessory connections 24 VDC
- Easily adjustable cam-operated limit switches
- Lockable and removable front cover for easy access
- Built-in maximum run timer and auto close timer
- Master/second with simple 3-wire connection
- Dual V-belt
- Heavy-duty right angle gear reducer
- Heavy-duty harmonic link with oil impregnated bronze bushings
- Gate arm clamp with breaker bar
- Full system capable for access control and reversing devices
- Weather resistant galvanized steel cabinet with powder coat finish
Arm Options
- 10 foot wood arm
- 12 foot wood arm
- 14 foot wood arm
Factory Options
- White or yellow powder coat finish
- Optional thermostatically-controlled strip heater
- Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present
Warranty
- 5 years
To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
Linear BGU-S Barrier Arm Gate Operator BGU-S
Linear BGU-S Series Barrier Gate Operators
For traffic control and parking applications, available in 1/2 horsepower, 115V supply voltage, various arm lengths.
Through switch selections, the gate operator is universal and suitable for all installation and operational functions. Switch selection allows for full flexibility as to how and when the arm comes down in traffic control situations.
The BGU-S has programmable fail safe or fail secure operation. With fail safe selected, when the gate operator senses AC power is no longer present, the arm will cycle open, remaining open until AC power is restored. With fail secure selected, during a power failure the BGU-S continues normal operation while monitoring the battery level. Once the batteries are low, the unit will cycle open until AC power is restored or the batteries receive a full charge via optional solar panels.
Ratings
- Maximum duty cycle: Continuous
Features
- Integral APeX Controller
- 24 VDC permanent magnet motor
- 115 VAC supply converted to 24 VDC for motor and controls
- Dual batteries charged by 115 VAC or optional solar panels
- On-board APeX Controller three-button control station
- Power on/off switch
- All accessory connections 24 VDC
- Easily adjustable cam-operated limit switches
- Lockable and removable front cover for easy access
- Built-in maximum run timer and auto close timer
- Master/second with simple 3-wire connection
- Dual V-belt
- Heavy-duty right angle gear reducer
- Heavy-duty harmonic link with oil impregnated bronze bushings
- Gate arm clamp with breaker bar
- Full system capable for access control and reversing devices
- Weather resistant galvanized steel cabinet with powder coat finish
Arm Options
- 10 foot wood arm
- 12 foot wood arm
- 14 foot wood arm
Factory Options
- White or yellow powder coat finish
- Optional thermostatically-controlled strip heater
- Optional stainless steel power coated cabinet for installation in areas where high concentration of corrosive material or atmosphere is present
- Warranty 5 years
To get on our schedule for your Linear barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing Automatic Barrier Arm Gate Openers:
********** The following is just a small list of some DoorKing automatic barrier arm gate openers we repair and install, there are many more different solutions for the many different entrance configurations that are out there, our technicians can figure out what the specific solutions are for your specific entrance. To get on our schedule for your DoorKing automatic barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day *********
DoorKing DKS 1603 Spike System
DoorKing DKS 1610 Traffic Spikes
DoorKing DKS 1610 Warning Light
DoorKing DKS 1610 Warning Signs
***********
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS 1601 Barrier Arm Gate Operator DKS 160
DoorKing DKS 1601 Barrier Gate Operator
The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications. The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.
- Magnetic limit control.
- Ports for plug-in loop detectors.
- Automatic sequencing inputs for use with slide and swing gate operators.
- Up input memory buffer.
- Down memory option.
- Multiple up commands.
- Two convenience outlets.
- 360° gear box rotation.
- Gate tracker reporting output.
- Programming switches.
- Built-in power On/Off switch.
- Left or right hand mount.
- 1/2 HP continuous-duty motor.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- 40:1 gear-box running in a continuous oil bath.
- Arm rotates 90° in approximately 1.5 seconds.
- Class II, III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
- Dimensions (operator only): 15.25"W x 39.75"H x 14.75"D.
Options Availiable
- DC powered convenience open.
- 14-foot round aluminum arm.
- 14-foot wood arm.
- Wood arm folding bracket for low headroom.
- 12-foot plastic arm.
- Plastic arm folding bracket for low headroom.
- Foam padding for aluminum or wood arm.
- Plug-in loop detectors.
- Heater kit.
- Fan kit.
- Surge suppressors.
To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS 1602 Barrier Arm Gate Operator DKS 1602
DoorKing DKS 1602 Barrier Gate Operator
The 1602 operator is designed for traffic lanes up to 20-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.
- Magnetic limit control.
- Ports for plug-in loop detectors.
- Automatic sequencing inputs for use with slide and swing gate operators.
- Up input memory buffer.
- Down memory option.
- Multiple up commands.
- Two convenience outlets.
- 360° gear box rotation.
- Gate tracker reporting output.
- Programming switches.
- Built-in power On/Off switch.
- Left or right hand mount.
- 1 HP continuous-duty motor.
- 60:1 gear-box running in a continuous oil bath.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Arm rotates 90° in approximately 5.5 seconds.
- Class III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
- Dimensions (operator only): 15.25"W x 39.75"H x 15.75"D.
Options Availiable
- DC powered convenience open.
- 20-foot three-piece wood arm - counter balanced.
- Plug-in loop detectors.
- Heater kit.
- Fan kit.
- Surge suppressors.
To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS 1603 Barrier Gate Spike System Gate Operator DKS 1603
DoorKing DKS 1603 Barrier Gate Spike System
The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.
A complete 1603 / auto-spike system consist of several different components. A typical system will require a 1603 operator, transfer box (transfer box is factory installed to the 1603 operator), tunnel section(s) as needed, spike section(s) as needed, end cap. A traffic signal and/or warning sign is required with this system.
- Magnetic limit control.
- Ports for plug-in loop detectors.
- Automatic sequencing inputs for use with slide and swing gate operators.
- Up input memory buffer.
- Down memory option.
- Multiple up commands.
- Two convenience outlets.
- Gate tracker reporting output.
- Programming switches.
- Built-in power On/Off switch.
- Left or right hand mount.
- 1/2 HP continuous-duty motor.
- 115, 230°, 460° VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- 40:1 gear-box running in a continuous oil bath.
- Arm rotates 90° in approximately 1.5 seconds.
- Class II, III and IV applications.
- Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
- Dimensions: 15.25"W x 43.75"H x 14.75"D.
Spike Component
- Tunnel sections surface mount: 31"W x 3"H x 24 or 36"L
- Spike sections surface mount: 31"W x 3"H x 36 or 72"L
- End Cap: 31"W x 3"H x 12.25"L
Options Availiable
- DC Powered convenience open.
- 14-foot round (3" dia) aluminum arm.
- 14-foot 1 x 3 inch wood arm.
- Arm folding bracket assembly for low headroom (wood arm only).
- Foam padding for arms.
- Fan Kit
- Heater Kit
- Plug-in loop detectors.
- Surge suppressors.
To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS 1610 Traffic Spikes DKS 1610 Traffic Spikes
DoorKing DKS 1610 Traffic Spikes
Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes. Speed bumps force drivers to slow down while driving through the controlled entry point. They are also ideal for keeping vehicular traffic at a safe speed while driving over traffic spikes.
Flush Mount Traffic Spikes
- Individual spring loaded spikes.
- Stainless steel springs.
- Weight spikes (no springs) version available.
- Lock-down version available.
- Flush in-ground unit.
- Painted bright red for easy visibility.
- Ideal to enforce one-way traffic.
- Dimensions: 6.5"H x 12.5"W x 72"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
- Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage
Surface Mount Traffic Spikes
- 3-inch rise provides a built-in speed bump.
- Spikes sections available in 3-foot sections.
- End caps provide a smooth end to the spike section.
- Torsion springs.
- Lock-down standard.
- Surface mount unit.
- 1/4-inch diamond plate painted bright yellow for easy visibility.
- Dimensions: 3"H x 31"W x 36"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
- Speed bumps should always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage.
Speed Bumps dsk spike
- Speed bumps are constructed from solid composite material.
- Speed bumps can be easily removed and re-installed.
- Painted bright yellow for easy visibility.
- Designed for installation on concrete surfaces only.
- Dimensions: 2"H x 11.5"W x 72"L.
To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS 1610 Warning Light DKS 1610 Warning Light
DoorKing DKS 1610 Warning Light
Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage. Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes.
Traffic Signal
- Red / green signal operates in sync with operator.
- 8-inch lenses
- 8000 hour / 67 watt traffic bulbs.
- Illuminated with two 67-watt, 8000 hour traffic lamps.
- 115 VAC.
- UL Listed.
- Dimensions: 21"H x 9.75"W x 14"D.
- Designed to be mounted on 1603-215 mounting post (not included).
To get on our schedule for your DoorKing barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Barrier Arm Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DKS 1610 Warning Signs DKS 1610 Warning Signs
DoorKing DKS 1610 Warning Sign
- Warning Signs
- Light sensor for automatic operation.
- Built-in flood lamp for spike illumination.
- Keyed on/off override switch.
- Illuminated with two 20-watt fluorescent lamps.
- 150-watt flood lamp for spike illumination.
- 115 VAC.
- ETL Listed.
- Dimensions: 24"H x 24"W x 8"D.
- Designed to be mounted on 3" mounting pipe (not included).
To get on our schedule for your Door King barrier arm gate opener repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Access Controls
Multi Tennant Call Boxes and Telephone Entry Systems and Commercial Keypad Entry Devices:
********** The following is just a small list of some multi tennant call boxes and commercial keypad entry devices we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate. Just give us a call to schedule a technician out to your location. To get on our schedule for your gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. *********
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster Access Control Devices
**** The following is just a list of just some of the Liftmaster access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your Liftmaster access contols repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CAP2D 2-Gate Controller (CAP2D)
Connected Access Portal 2-Door Controller cloud-based credentialed access control.
Key Features
- LIFTMASTER CLOUD™ Smart Access Control Software
- Controls up to 2 Gates/Doors Each
- Easily Expandable Network through LiftMaster Cloud
Smart
- Multiple-Entrance Control with LiftMaster Cloud.
- Eliminate Wiring between controllers in multiple-entrance applications with LiftMaster Cloud.
- Universal Compatibility with 26- and 30-bit Wiegand-compatible readers, receivers and RFID readers.
- Expansive Capacity for 25,000 active credentials stored locally so residents can enter even when the internet is down.
- Remote Programming and activity monitoring using LiftMaster Cloud.
Reliable
- Easy to Install in new or existing properties.
- Backed-Up Storage in LiftMaster Cloud ensures that databases are never lost.
- Power over Ethernet (PoE) allows for flexibility of device placement.
Secure
- Email Alerts let you know when a suspended code is used or if an active code is being overused.
- Real-Time Activity Tracking with LiftMaster Cloud.
- Cloud-Based Security keeps data protected and safeguards resident information.
Total Solution Accessories
- CAPXL Connected Access Portal, High Capacity cloud-based access control for residents and guests.
- CAPCELL Cellular 4G/LTE Modem with Wi-Fi® makes it easy to connect CAPXL and CAP2D(s) anywhere.
- PPWR Passport Receiver compatible with all standard Wiegand Protocols.
- PPV3M/PPK3PHM/PPLK1-X Passport Remote Controls Visor and keychain remotes with unique credentialed IDs.
- KPR2000 Wired /Keypad and Proximity Reader single-entry, multifunction controller that supports up to 2,000 users.
- LMMC-MINI /multiCLASS® SE RP10 MINI Mullion proximity reader for credentialed access.
- LMPC2-ST Proxcard II® 1326 /Clamshell Card proximity card for credentialed access.
Capacities
- 2 controlled gates / doors
- 25,000 local resident capacity
- 6,000 local event history (FIFO) offline from host
- Multiple, Holiday and Hold-Open Scheduling, including one-time and repeating exceptions
Power
- 12V DC, Min. 1.5 Amps (transformer not included)
- PoE (802.3af) enabled network devices, 13 Watts max.
- UL® listed
Dimensions
- 4.5" x 3" x 1.25"
Mechanics
- Compact size mounts on standard single electrical-gang box or in a NEMA enclosure
- Led indicator lights communicate status
Communication
- Internet (Dynamic or Static IP)
- LiftMaster Cloud subscription required
- High speed
- DSL with at least 1 MB download speed
- Cellular (optional CAPCELL)
- Input Ports
- 2 Wiegand inputs
- 2 Request-to-exit (REX) inputs
- 2 Supervised inputs
- Outputs
- 2 Primary relays
- 2 Auxiliary relays
Warranty
- 2 Year Warranty
To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CAPCELL Cellular 4G/LTE Modem (CAPCELL)
Cellular 4G/LTE Modem with Wi-Fi® brings connectivity anywhere.
Key Features
- Plug and play easy setup.
- Use your preferred carrier, compatible with major U.S. and Canadian carriers
Smart
- Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
- Sign up with your preferred carrier or add on to your current plan.
- Avoid trenching and wire pulling for speedy installations.
- Eliminate plain old telephone service (POTS) and improve reliability.
Reliable
- 4G/LTE Connection eliminates the need for hardwired internet.
- Durable, Commercial-Grade Construction withstands extreme temperatures.
- Fan-less Design means no clogged filters and no overheating.
Secure
- Password-Protected Wi-Fi ensures privacy.
- Avoid the Complications of complex networks and firewalls.
Compatibility
- At&t®
- Verizon®
- T-mobile®
- Bell®
- Rogers™
- Telus®
Total Solution Accessories
- CAPXL Connected Access Portal, High Capacity cloud-based access control for residents and guests.
- CAP2D Connected Access Portal, 2-Door Controller cloud-based, credentialed access control.
- 828LM Internet Gateway enables smartphone control for MyQ® products.
- CSW24UL Gate Operator ensures quick and safe access for gated communities and mid- to high-rise buildings. Pair with CAPXL for remote system diagnostics.
- WFAEXT Antenna Mounting Kit for remote antenna mounting and extended cell or Wi-Fi range.
- Elevator Access Control CAPB485 / CAPDC485/ CAPRELAY integrated elevator access and control.
Capacities
- Connect up to 4 wired or multiple Wi-Fi devices
Power
- Input 100–240V AC to 12V DC(transformer included)
Mechanics
- Commercial-grade metal housing
- Primary and backup antennas for cellular and Wi-Fi
Dimensions
- 1.2" x 4.3" x 3.3" (antenna is 6.75")
Communication
- Internet
- Cellular 4G/LTE with 3G fallback. Also compatible with multiple carriers
- Wi-Fi
- Supports 64-/128-Bit WEP, WPA and WPA2
- Wireless N Speeds (up to 300 MB/s) 2.4 GHz
- Ability to set static IP addresses
- Ports
- 4 RJ45 LANs
- 1 RJ45 WAN
- 1 SIM Card Slot
- 2 Cellular SMA Antennas
- 2 Wi-Fi SMA Antennas
- USB
Operating Temperature
- -22°F - 158°F (-30°C - 70°C)
Warranty
- 2 Year
To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster CAPXL Connected Access Portal (CAPXL)
Connected Access Portal High Capacity Cloud-based access control for residential communities.
Key Features
- LiftMaster Cloud™ Smart Access Control Software
- Color Touch Display 10”, 720p High-Def Interface
- Plug and Play Easy Setup and Programming
Smart
- Intuitive Interface with color touch display for superior resident and guest usability.
- Customizable Background on a 10", full-color, 720p high-definition screen.
- Remote Programming and activity monitoring using Liftmaster Cloud.
- Configurable Email Notifications know when codes are overused or if service is needed for the CAPXL, CAP2D or Gate Operator.
- Eliminate Trenching with Wi-Fi® and wireless link to Liftmaster® Gate Operators.
Reliable
- Voice Over IP (VoIP) provides crystal-clear call quality with no long-distance charges.
- Stainless Steel for a modern, durable design.
- Local System Memory allows residents to enter even when the internet is down.
Secure
- Get Alerted when a suspended code is used or if an active code is being overused.
- Real-Time Activity Tracking with Liftmaster Cloud.
- Cloud-Based Security keeps data protected and safeguards resident information.
Total Solution Accessories
- CAP2D Connected Access Portal, 2-Door Controller cloud-based, credentialed access control.
- CAPCELL Cellular 4G/LTE Modem with Wi-Fi makes it easy to connect CAPXL and CAP2D(s) anywhere.
- CAPXLTK Trim Kit and Back Kit conceal openings left from other systems in flush-mount, Infinity L and Icon installations.
- Passport Remote Controls PPV3M / PPK3PHM / PPLK1-X visor and keychain remotes with unique credentialed IDs.
- LMMC-MINI multiCLASS® SE RP10 Mini Mullion proximity reader for credentialed access.
- LMPC2-ST PROXCARD II® 1326 Clamshell Card Proximity card for credentialed access.
- CAP485 Elevator Access Control CAPB485 / CAPDC485 / CAPRELAY Integrated elevator access and control.
- 86LM/WFAEXT Antenna Mounting Kit For extended range or remote mounting for radios or Wi-Fi.
- Gate Operators CSW24UL / CSL24UL / HCTDCUL Ensure quick and safe access for residential communities. Pair with CAPXL for remote system diagnostics.
Capacities
- 4 Controlled Gates/Doors
- Wireless Link for up to 8 LiftMaster® Operators
- 4 to 8 Digit Entry Codes
- 4 to 6 Digit Directory Codes
- 50,000 Local Resident Capacity
- 50,000 Local Event History
- Multiple, Holiday and Hold-Open Scheduling, including one-time and repeating exceptions
Power
- Input 120V AC (Transformer Included)
- UL® Listed
- Relay Outputs 3 Amps
Dimensions
- CAPXL: 18" x 14" x 4.5"
- CAPXLTK (Outer Trim): 23.75" x 19.375"
Mechanics
- 10", 720p High-definition touch display
- Fade-and glare-resistant display
- Outdoor stainless-steel housing
- Built-in Security+ 2.0® radio
- Postal lock provision
- Surface, flush (CAPXLTK) or pedestal (PED42, PED64) mount
- Camera ready; use any standard pinhole camera
Standard Specs
- Communication Internet (Dynamic or Static IP)
- LiftMaster Cloud subscription required
- Wi-Fi®
- High speed DSL with at least 1MB download speed
- Cellular (optional CAPCELL)
Voice
- VoIP (Voice over IP)
- Phone.com® Service Required for VoIP
Onboard Radio
- Security+ 2.0 for Passport Remote Controls
- Wireless link to UL 325 Gate Operators manufactured after October 2017
- Retrofit Kits will be available for operators manufactured between January 2016 and October 2017
- HomeLink® IV and V Compatible*
* Requires HOA or Management Assistance
Warranty
- 2-Year
Input Ports
- 4 Wiegand Inputs
- 4 Request to-Exit (REX) Inputs
- 4 Supervised inputs
- 1 Auto-Call input (Requires LPEXP)
Outputs
- 4 Primary relays
- 4 Auxiliary relays
- 1 Wiegand output
Operating Temperature
- -20°F - 130°F (-29°C - 51°C)
To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster EL1SS Telephone Entry Systems (EL1SS)
The LiftMaster® EL1SS Telephone Intercom and Access Control System provides wired telephone intercom communication and secure access control at the gate or door. It is easy to install, and its rugged stainless steel housing provides reliable, durable performance year after year, all at an exceptional value. With the EL1SS, residents or small businesses can simply communicate with visitors, grant or deny access, all from the convenience of their phone.
Performance
- Connects directly to the existing residential home phone line so no additional monthly expenses are incurred.
- Easy-to-install design saves an average of 10 minutes on installation time over older models.
- Simple design makes it ideal for residents and visitors to communicate and grant or deny access.
- Stainless steel faceplate with black powder coated housing is attractive and tough.
- 200 (4-digit) unique, programmable entry codes provide convenient assigned access
To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster EL2000SS Telephone Entry System (EL2000SS)
The EL2000SS is a high-capacity telephone entry access control system designed to complement virtually any gated community. It is flexible enough to be used in apartment buildings, condo complexes, office parks and commercial sites. It features a 5-inch backlit LCD screen and clearly displays up to 4 lines with 20 characters per line, making it a great choice for multi-tenant installations.
The EL2000SS utilizes our new Versa XS 4.0 menu-driven software configuration and database management tool with a simple user interface designed with you in mind. It includes FREE cloud storage for reliable data sharing and backup.
Available in a stainless steel housing.
Performance
- Entry Codes allow for 2,000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes, 1000 card codes, 500 entry codes for example.
- Call Waiting allows the resident to answer a call from the gate or door while on another call.
- Recessed, Lighted, ADA-Compliant Keypad makes entering your PIN easy and convenient.
- Transaction Monitoring stores a maximum of 8,000 transactions including date, time, identification and transaction type.
- Remote Updates enables system updates and upgrades to be made via a modem connection.
- Wiegand inputs Up to 4 Wiegand inputs, with 2 (optional) plug-in modules (WOMODKT).
- Programmable Relays provide four assignable built-in relays.
- Activity Reporting gives property managers the ability to print database, system and history reports.
- Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
- Versa XS is our menu driven software configuration and database management tool for EL2000 Telephone Entry Systems. To learn more about Versa XS click here.
Safety and Security
- Auto Sensor input automatically dials the residence or can activate relays.
- Anti-Passback prevents pass back of cards and codes for a pre-programmed amount of time to eliminate tailgating.
- Security Lockout prevents access for a pre-programmed amount of time when too many invalid code attempts are made.
- Postal Lock provision supports a switch kit that integrates with U.S. Postal Service lock so only a postal carrier can enter.
- Unlock Schedule for a gate or door allows you to configure entry points to automatically open or lock at set periods of time.
- Holiday Programming provides up to 16 days that can be defined to override the standard lock/unlock schedules.
- Time Zone Feature allows for up to 62 programmable time zones with three segments each.
Specifications
- Power - 120 VAC to 16 VDC transformer (included)
- Shipping Weight - 20 lbs.
- Dimensions - EL2000SS: 16 in. H x 11.25 in. L x 3.25 in. D
- Model Numbers - EL2000SS - LCD unit, stainless steel housing
Additional Features
- VERSA SOFTWARE - Versa XS is a Microsoft Windows® based software application that allows you to use almost any Windows personal computer to conveniently and securely configure, manage and update access control records. Download the latest version of Versa.
- UNIVERSAL BOARD - The EL25 and EL2000SS share the same main processing board, which makes it much easier to master the installation and service both systems.
- REMOTE ACCESS DIAGNOSTICS - The EL2000SS will retain unit alarms within the system event buffer. For added security, the unit will record the following alarms: forced door/gate and ajar door/gate. The EL2000SS also records unit over voltage and under voltage alarms, allowing for simplified troubleshooting of the system.
- E-Z SCAN - Cards and Passport remote controls can be programmed into the EL2000SS simply by using the optional card reader or radio receiver installed into one of the plug-in modules. Is compatible with the PPWR and Passport remote controls. VOICE PROMPTS - Guides installers through system setup at the unit's main keypad and provides assistance to end users with the push of a button. (ADA application)
- WARRANTY - 2 Years.
To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster EL25 Telephone Entry System (EL25)
Residential and Commercial Telephone Entry System with Expanded Capacity and Enhanced Versatility The EL25 is beautifully engineered for private residences, yet fully adaptable for use in apartment buildings, condo complexes, office parks and commercial sites. The EL25 utilizes our new Versa XS 4.0 menu-driven software configuration and database management tool with a simple user interface designed with you in mind. It includes FREE cloud storage for reliable data sharing and backup.
Available in grey, nickel or silver housing which can be landscape or portrait mounted.
Performance
- Entry Codes allow for 2,000 4-digit codes to be programmed. The codes can be time-restricted and/or use restricted. The codes can be split up any way you choose; 500 directory codes, 1000 card codes, 500 entry codes for example.
- Call Waiting allows the resident to answer a call from the gate or door while on another call.
- Recessed, Lighted, ADA-Compliant Keypad makes entering your PIN easy and convenient.
- Transaction Monitoring stores a maximum of 8,000 transactions including date, time, identification and transaction type.
- Remote Updates enables system updates and upgrades to be made via a modem connection.
- Wiegand Inputs Up to 4 Wiegand inputs, with 2 (optional) plug-in modules (WOMODKT).
- Programmable Relays provide four assignable built-in relays.
- Activity Reporting gives property managers the ability to print database, system and history reports.
- Call Forwarding and Do Not Disturb schedules can be programmed for every resident.
- Versa XS is our menu driven software configuration and database management tool for EL25 Telephone Entry Systems. To learn more about Versa XS click here.
Safety and Security
- Auto Sensor input automatically dials the residence or can activate relays.
- Anti-Passback prevents pass back of cards and codes for a pre-programmed amount of time to eliminate tailgating.
- Security Lockout prevents access for a pre-programmed amount of time when too many invalid code attempts are made.
- Postal Lock provision supports a switch kit that integrates with U.S. Postal Service lock so only a postal carrier can enter.
- Unlock Schedule for a gate or door allows you to configure entry points to automatically open or lock at set periods of time.
- Holiday Programming provides up to 16 days that can be defined to override the standard lock/unlock schedules.
- Time Zone Feature allows for up to 62 programmable time zones with three segments each.
Specifications
- Power - 120 VAC to 16 VDC transformer (included)
- Shipping Weight - 11 lbs.
- Dimensions - 6 in. H x 10.25 in. L x 4 in. D
- Model Numbers - EL25G - grey, EL25N - nickel, EL25S - silver
Additional Features
- Versa Software - Versa XS is a Microsoft Windows® based software application that allows you to use almost any Windows personal computer to conveniently and securely configure, manage and update access control records. Download the latest version of Versa. See Software Download.
- Universal Board - The EL25 and EL2000SS share the same main processing board, which makes it much easier to master the installation and service both systems.
- Remote Access Diagnostics - The EL25 will retain unit alarms within the system event buffer. For added security, the unit will record the following alarms: forced door/gate and ajar door/gate. The EL25 also records unit over voltage and under voltage alarms, allowing for simplified troubleshooting of the system.
- E-Z Scan - Cards and Passport remote controls can be programmed into the EL25 simply by using the optional card reader or radio receiver installed into one of the plug-in modules. Is compatible with the PPWR and Passport remote controls. Voice Prompts - Guides installers through system setup at the unit's main keypad and provides assistance to end users with the push of a button. (ADA application)
- Warranty - 2 Years.
To get on our schedule for your Liftmaster gate opener access control repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster Advanced Multi-Tenant Access Control (ICON26)
LiftMaster ICON 26 Advanced Multi-Tenant Access Control System
The Icon26™ is a premium telephone entry/access control system for buildings with 250 to 1,000 tenants. Engineered to provide safe, convenient access for residents and guests, the system also offers added expandability and programming simplicity for isntallers and property managers.Featuring a high-resolution, 10" LCD screen, the unit clearly displays up to 26 names at a time and is easily readable in all light conditions, including direct sunlight. This combined with its capability to operate in high temperatures (up to 165°F) makes this system an excellent choice for virutally any multi-tenant location.
The Icon 26™ also includes a long list of built-in and exclusive features such as a scrollable directory, optional camera capability, audio "help" assistance and a patented "double box" design for easier programming. Plus, the system is fully expandable to control up to 31 remote locations with 32 programmable user groups and 32 programmable 7-day timer templates.
- High-resolution, 10", 26-name, large LCD
- Two slots for memory cards
- High-quality digital communication system
- History buffer of up to 8,000 transactions
- 60 programmable utility keycodes per system
- Field upgradable memory capacity
- Programmable "unlisted resident" feature
- 6-digit resident keycode access
- 3-digit resident dialing
- System mutes speaker during dialing
- Touch-tone and rotary dial detection
- User-friendly local programming via built-in keyboard
- Two independent 7-day timers per relay output
- Postal lock ready
- "Exit Switch" ready
To get on our schedule for your Liftmaster gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Linear Access Control Devices
**** The following is just a list of just some of the Linear access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your Linear access contols repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Linear AM3Plus 4-Portal Access Controller (AM3Plus)
Linear AM3Plus 4-Portal Access Controller
The Model AM3Plus 4-Portal Access Controller is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.
Housed in a lockable, plastic enclosure, the AM3Plus features a 2-digit LED display, nine status indicators, four relay indicators with four relay activation pushbuttons. Three programming buttons, a reset button, and a power indicator are present. The enclosure is monitored with a magnetic tamper switch.
The system controls its four output relays by responding to various input devices that react to proximity cards, transmitters, and entry codes. The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.
Access is granted or denied depending on the current user's authorization to gain access and system settings that control groups of users or all users. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.
For easy programming, the AM3Plus contains Linear's built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AM3Plus is also compatible with Linear's powerful AccessBase2000 dedicated access control PC software.
The AM3Plus is network ready. AM3Plus units can be interconnected with Linear's AE1000Plus and AE2000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AM3Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.
Two sets of Wiegand inputs are available for connection to 26, 30, or 31-bit Wiegand devices (card readers, etc.). Two sets of PBUS inputs are available for connection to Linear's line of remote accessories.
Capabilities with AccessBase2000 Programming
- Programming through dedicated PC
- Up to 10,000 cardholders grouped in sets
- Up to 24 card blocks with up to 1,900 cards each (45,600 total)
- Up to 20,000 individually enrolled cards
- Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total) †
- Up to 20,000 individually enrolled transmitters †
- Up to 20,000 entry codes for cardholders
- Up to 20,000 telephone directory codes for cardholders
- 20,000 event log entries per unit
- Up to 31 access time zones
- Up to six PBUS and two Wiegand devices per unit
Capabilities with AXNET Programming
- Programming using ANY PC through browser software
- Up to 2,000 cardholders
- Up to 24 card blocks with up to 1,600 cards each (38,400 total)
- Up to 2,000 individually enrolled cards
- Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total) †
- Up to 2,000 individually enrolled transmitters †
- Up to 2,000 key codes
- Up to 2,000 telephone directory codes
- 2,500 event log entries per unit
- Up to 8 access time zones
- Up to four PBUS and two Wiegand devices per unit
- † (AM-RRR remote receiver required)
Features
- Full control of 4 doors; each supporting request to exit and door status monitoring
- 2 Wiegand inputs for readers
- Add AM-CRI's for more Wiegand inputs
- Local or remote programming using a PC and AccessBase2000 or through browser with built-in AXNET software
- Remote programming using optional ACM-1 modem (ACP00905)
- Relay auto lock/unlock schedules
- 11.5" W x 12.5" H x 4" D
To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Linear Commercial Telephone Entry System One Door (AE-100)
Linear AE-100 Commercial Telephone Entry System - One Door
The Model AE-100 Commercial Telephone Entry System - One Door is designed for use as a primary access control device for apartments, condominiums, and offices with up to 125 residents.
The system can be used in a lobby or outside. Surface, recessed, and pedestal mounting options are supported. The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access.
Housed in a locked, rugged stainless steel faced enclosure, the AE-100 features a lighted 12-key telephone style keypad and four operation buttons all with bright, easy-to-see graphics. The backlit two-line directory LCD display scrolls a programmable welcome message and shows the directory Names and Directory Codes.
The system contains a built-in microphone, tamper resistant speaker, and a TTY connector for the hearing impaired. The heavy duty access relay can control electric door strikes, magnetic locks, door & gate operators, or barrier gates.
Multi-lingual display programming prompts and voice help is available with a choice of English, Spanish, French-Canadian, or Portuguese language selection for the system. The system can be programmed locally using the keypad, or remotely with a touch tone telephone.
Up to four AE-100 units can be connected to the same dedicated telephone line to form a simple network. Connecting multiple units allows transferring programming data (either the directory entries only or the entire memory's contents) from the "master" unit to the other sub-units.
Optional features that the AE-100 supports are provisions for postal lock and color CCTV camera installation (Model CCM-1A).
The AE-100 is powered from a 16 VAC plug-in transformer and supports an internal rechargeable 1.2 amp/hour backup battery (not included). The battery charging circuit will support an external backup battery with up to 7 amp/hour capacity.
Applications
Small apartment buildings, condominiums, or gated communitiesFeatures
- Many installation choices: surface, recessed, gooseneck
- Stainless steel front panel
- Telephone style keypad with lighting
- Accepts a total of 125 directory listings or stand-alone entry codes
- TTY jack for connection to text communication devices for the hearing impaired
- Simple network capability with up to four units - allows transferring programming data from "master" unit to other sub-units
- Two-line-16-character LCD display
- Removable terminal blocks
- Form "C" access relay rated at 10 amps AC and 7 amps DC @ 30 volts
- Load shed circuitry protects backup battery
- 9.75" W x 11.75" H x 3.5" D
To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Linear RE-2 Residential Telephone Entry System (RE-2)
Linear RE-2 Residential Telephone Entry System
The Model RE-2N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional color video camera are housed in a rugged enclosure that can be mounted to a pedestal, bolted directly to a wall, or mounted recessed in a wall with the optional trim ring. The die-cast keypad keys have bright, easy-to-read graphics and are lit with overhead lights. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.
Operation
Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-2N will acquire the residence's local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-2N by pressing a key on the telephone's keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitor's call.
Call Waiting:
If the resident is using the telephone at the time a visitor calls, the RE-2N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.
Call Forwarding:
Programmable call forwarding allows the RE-2N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-2N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.
Alternate Numbers:
For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.
Local Control:
The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.
Access Methods:
Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linear's Model AM-KP keypad can be used as a secondary remote keypad for the RE-2N.
Up to 24 sets of block coded MegaCode® transmitters (up to 100 transmitters total) can be used to gain access through the RE-2N's built-in radio receiver. Each transmitter can be individually suspended or re-activated. One facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-2N.
System Features
Time Zones:
The RE-2N contains an internal clock and calendar. Seven Programmable "time zones" allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the "Do Not Disturb" feature can each be set to only be active during a specific time zone period. Up to ten "holiday" days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.
Portal Supervision:
The SENSE/INHIBIT input can be used two ways. If programmed for "door sense", a switch on the door detects forced entry or door ajar situations. If programmed for "inhibit", the input can be wired to a "service" switch or automatic timer that will disable the Relay #1 when required.
Hardwired Activation:
The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-2N case to allow keyed entry for authorized personnel.
Access Security:
The "anti-passback" feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The "keypad lockout" feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.
Event Log:
An access log of up to 450 events is stored in the unit's memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-2N's built-in modem.
Local & Remote Programming:
The system's built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The software's graphic display of each of the programming step makes programming easy. Without a computer, the RE-2N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.
The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.
Obstacle Detection:
Linear's Model MGT safety edge transmitter is compatible with the RE-2N. This MGT detects and transmits obstacle events to the RE-2N receiver. Obstacle signals from an MGT transmitter will activate Relay #2.
Alarm Interface:
Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.
Voice Synthesizer:
A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.
Features
- Powder coated nickel or stainless steel finish
- Downlighting
- User friendly voice prompts
- Two programmable outputs control two openings
- Obstacle reverse, alarm shunt
- Provisions for Knox Box
- Simple to program and maintain through on board keypad, touchtone telephone, or computer with modem
- 450 event memory log
- Supports 100 entry codes; 100 block-coded transmitters
- Built-in 318 MHz superheterodyne radio receiver
- Backup battery ready
- 10" W x 6.25" H x 4" D
To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Linear RE-1 Residential Telephone Entry System (RE-1)
Linear RE-1 Residential Telephone Entry System
The Model RE-1N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional video camera are housed in a rugged enclosure that can be mounted to a pedestal or bolted directly to a wall. The diecast keypad keys have bright, easy-to-read graphics and are lit with an overhead light. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.
Operation
Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-1N will acquire the residence's local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-1N by pressing a key on the telephone's keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitor's call.
Call waiting:
If the resident is using the telephone at the time a visitor calls, the RE-1N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.
Call Forwarding:
Programmable call forwarding allows the RE-1N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-1N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.
Alternate Numbers:
For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.
Local Control:
The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.
Access Methods:
Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linear’s Model AM-KP keypad can be used as a secondary remote keypad for the RE-1N.
Up to 24 sets of block coded MegaCode® transmitters (up to 100 transmitters total) can be used to gain access through the RE-1N's built-in radio receiver. Each transmitter can be individually suspended or re-activated. Four facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-1N.
System Features
Time Zones:
The RE-1N contains an internal clock and calendar. Seven programmable time zones allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the Do Not Disturb feature can each be set to only be active during a specific time zone period. Up to ten holiday days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.
Portal Supervision:
The SENSE/INHIBIT input can be used two ways. If programmed for door sense, a switch on the door detects forced entry or door ajar situations. If programmed for inhibit, the input can be wired to a service switch or automatic timer that will disable the Relay #1 when required.
Hardwired Activation:
The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-1 case to allow keyed entry for authorized personnel.
Access Security:
The anti-passback feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The keypad lockout feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.
Event Log:
An access log of up to 450 events is stored in the unit's memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-1N's built-in modem.
Local & Remote Programming:
The system's built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The software's graphic display of each of the programming step makes programming easy. Without a computer, the RE-1N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.
The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.
Obstacle Detection:
Linear's Model MGT safety edge transmitter is compatible with the RE-1N. This MGT detects and transmits obstacle events to the RE-1N receiver. Obstacle signals from an MGT transmitter will activate Relay #2.
Alarm Interface:
Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.
Voice Synthesizer:
A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.
Features
- Cast housing stainless steel finish (RE-1SS) or nickel finish (RE-1N)
- Downlighting
- User friendly voice prompts
- Two programmable outputs control two openings
- Obstacle reverse, alarm shunt
- Provisions for Knox Box
- Simple to program and maintain through on board keypad, touchtone telephone, or computer with modem
- 450 event memory log
- Supports 100 entry codes; 100 block-coded transmitters
- Built-in 318 MHz superheterodyne radio receiver
- Backup battery ready
- 6.45" W x 10.81" H x 3.74" D
To get on our schedule for your Linear gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing Access Control Devices
**** The following is just a list of just some of the DoorKing access control devices for gate openers we repair and install, there are many more different solutions for the many different gate configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate access situation. To get on our schedule for your DoorKing access contols repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day. ******
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing 1812 Access Plus DKS1812AP
DoorKing 1812 Access Plus
The 1812 Access Plus is PC Programmable and IP Addressible. Each Access Plus Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. With the easy to use Access Plus Account Manager programming software, you can customize the system immediately. The 1812 Access Plus controls a main door or gate and can easily be expanded to control up to six additional access points. The 1812 Access Plus features an upgraded processor, a new high fidelity digital voice circuit, better volume control, a lighted push-button and additional call out telephone numbers (up to 27). Discerning homeowners will appreciate the additional programming, reporting and advanced features found in the 1812 Access Plus system.
DoorKing's Access Plus Account Manager Software is a powerful, flexible and easy to use computer program that allows you to manage access control in a variety of controlled access applications.
To get on our schedule for your Door King gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing 1812 Classic DKS1812C
DoorKing 1812 Classic
Single Family Intercom System.
The model 1812 is a unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessity to pay for an additional telephone line at their home. With its "intercom mode" programming feature, the 1812 can also be connected to a PBX or KSU type system, making it ideal for small businesses to control access through a single door or gate. Visitors are easily identified by voice communication and can be granted or denied access directly from a touch-tone telephone. The 1812 is available in surface, wall and flush mount designs.
To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing DoorKing 1812 Plus DKS1812P
DoorKing 1812 Plus
Homeowners / Small Apartment / Condo
The 1812 Plus is an updated version of the 1812 Classic and features an upgraded processor, a new high fidelity digital voice circuit, better volume control, a lighted push-button and additional call out telephone numbers (up to 27). This unique communication and access control system allows homeowners to use their existing telephone as an intercom to speak with a guest at a door or gate and is ideal for those applications requiring a basic, single door or gate, access control solution.
To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing 1833 DKS1833
DoorKing 1833
The Model 1833 is an ideal telephone entry and access control system that is suited for applications that do not require a directory or in applications where a separate directory exists.
Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1833 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1833 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.
To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing 1834 DKS1834
DoorKing 1834
The Model 1834 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only.
Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button and big A and Z scroll buttons makes this system one of the easiest to use on the market today! For additional security, the 1834 allows you to monitor activity AS IT HAPPENS on your computer display.
To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing 1835 DKS1835
DoorKing 1835
The Model 1835 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites.
Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1835 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1835 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.
The 1835 is available in three distinct styles: Surface mount, Flush mount and Wall mount. Contact your professional DKS system installer for more information about this and other DKS products.
To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
DoorKing 1837 DKS 1837
DoorKing 1837
The Model 1837 is an ideal telephone entry and access control system suited for medium to large apartment and gated community applications as well as office buildings and industrial sites.
Each 1830 Series unit allows Voice and Data connection over either Cellular, VoIP, Wireless, or POTS. DKS offers easy ways to connect fast using the DKS IM Server and DKS Cellular services. The eight-line LCD display features big 1/2-inch characters for easy viewing and your personalized message appears on the screen when the system is not in use. Our unique "One Touch" CALL button makes this system one of the easiest to use on the market today! The built-in electronic directory, easy to use Remote Account Manager programming software, card reader interface and expandability options make this unit an ideal choice for those applications with a large number of system users and entry locations. Up to 24 card readers can be interfaced with the 1837 to provide access control. Additionally, our elevator control module restricts which floors a guest or system users have access to, making it an ideal system for high rise buildings. For additional security, the 1837 allows you to monitor activity AS IT HAPPENS on your computer display and with our anti-pass back memory, you can enable a TRUE anti-pass back system in one of three different configurations; passive, active and trap.
The 1837 is available in three distinct styles: Surface mount, Flush mount and Wall mount. Contact your professional DKS system installer for more information about this and other DKS products.
To get on our schedule for your DoorKing gate opener call box repair needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Gate Opener Remote Controls and Keypads:
**** The following is just a small list of some controls, and accessories we replace and install, there are many more different solutions for the many different gate opener configurations that are out there, our technicians can figure out what the specific solutions are for your specific gate opener and setup.
To get on our schedule for your Gate Opener Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster 312HM Universal Coaxial Receiver (312HM)
Liftmaster 312HM Universal Coaxial Receiver with Security+®
312HM – 315 MHz
- External 8" whip antenna included.
- Security+® rolling code and/or DIP switch compatibility
- 12VDC or 18 - 35VAC/DC jumper selectable
- Momentary or constant contact, jumper selection
- 2-piece aluminum case with detachable cover
- High security memory stores up to 15 Security+® remote control or keyless entry codes
- Normal security memory stores up to 31 LiftMaster® remote control codes of any type
- FCC certified 315MHz
To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster 412HM Universal Coaxial Receiver (412HM)
Liftmaster 412HM Universal Coaxial Receiver with Security+®
390 MHz
- External 8" whip antenna included.
- Security+® rolling code and/or DIP switch compatibility
- 12VDC or 18 - 35VAC/DC jumper selectable
- Momentary or constant contact, jumper selection
- 2-piece aluminum case with detachable cover
- High security memory stores up to 15 Security+® remote control or keyless entry codes
- Normal security memory stores up to 31 LiftMaster® remote control codes of any type
- FCC certified 315MHz
To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Liftmaster STAR 450 Commercial Universal Receiver (STAR450)
Liftmaster STAR 450 Commercial Universal Receiver
315 MHz or 390 MHz (Specify with order)
- For gate and commercial door operators
- Compact size; easy to program
- Reduces installation time; compact design fits inside most gate operators
- Universal receiver with antenna
- Rapid Learn® feature programs multiple transmitters in just seconds
- User-friendly programming technology makes it easy to add, block and delete up to 450 transmitters individually
- Ideal for gated communities, parking lots and garages
- Compatible with Chamberlain® Security+®, billion code and keyless entry technologies
- Duplicate memory module may be removed for programming additional receivers or for safe backup storage
To get on our schedule for your Liftmaster Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster Universal Remote Control (375LM)
LiftMaster Premium Remote Control
To get on our schedule for your Liftmaster Remote Controls and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
***********
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster 377LM Wireless Keyless Entry System (377LM)
LiftMaster 377LM Wireless Keyless Entry System
To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
*****************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
LiftMaster 387LM Wireless Keyless Entry System (387LM)
LiftMaster 387LM Wireless Keyless Entry System
Universal Keyless Entry
- Designed to work with a variety of brands of garage door openers
- Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
- Wireless – powered by one 9V battery (included)
- Weatherproof, slide-up protective cover
- Backlit keypad
To get on our schedule for your Liftmaster Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
**************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Heddolf 318 Mhz frequency Wireless Keypad (P330-1KA)
Heddolf P330-1KA
Heddolf 318 Mhz frequency Wireless Keypad
Model: P330-1KA
- Heddolf 318 MHz Gate or Garage Door Opener Wireless Keypad Size : 6’ x 3 3/8’ x 2’
- Holds up to 60 individual 4-digit user code Plus the master code.
- User friendly coding
- Back lit keypad
- Weather Proof Encolsure
- Can be hardwired and/or wireless
- Designed to mount on gooseneck post or wall
- Compatible with the Allstar, Pulsa receivers
- Stainless steel faceplate
- Polycarbonate housing
- With dip switches for easy programming
To get on our schedule for your Gate Opener Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
**************
S.O.S Gate Opener Repair - Westlake Texas
817-590-8008
Linear 2022: Multi Double (2011)
Linear 2022: Multi Double
The Model 2022 Multi Double is a Multi-Code transmitter and receiver set. The set contains two Model 308911 1-Channel Visor Transmitters and one Model 109020 1-Channel Receiver.
FEATURES
- Compatible with all Multi-Code radio controls
- Transmitters supplied with visor clip
- Transmitters powered by 9-volt battery
- Three terminal 24-volt receiver connects directly to operator
- 1,024 codes
- RF frequency: 300 MHz
- 3" W x 5.5" H x 1.5" D (receiver)
- 2.5" W x 3.75" H x 0.875" D (transmitters)
To get on our schedule for your Gate Opener Keypad and Programing Service needs just give us a call at 817-590-8008 and we can usually be out same day or next day.
************
S.O.S Automatic Gate Opener Repair - Westlake Texas
817-590-8008
***********